linux-kernel - [PATCH v8 0/5] hwmon: ina2xx: implement chip reinitialization and add new attributes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1420467656-6112-1-git-send-email-bgolaszewski@baylibre.com>
Date:	Mon,  5 Jan 2015 15:20:51 +0100
From:	Bartosz Golaszewski <bgolaszewski@...libre.com>
To:	Guenter Roeck <linux@...ck-us.net>
Cc:	LKML <linux-kernel@...r.kernel.org>,
	Benoit Cousson <bcousson@...libre.com>,
	Patrick Titiano <ptitiano@...libre.com>,
	LM Sensors <lm-sensors@...sensors.org>,
	Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: [PATCH v8 0/5] hwmon: ina2xx: implement chip reinitialization and add new attributes

This series implements a mechanism to detect if the chip is in its POR state
and reinitialize it if needed. It also extends the sysfs interface to make the
driver configurable at run-time.

The shunt_resistor attribute allows to change the shunt resistance value
at run-time in cases where ina2xx used to do the measurement isn't integrated
with the shunt.

The avg_rate attribute allows to increase/decrease noise reduction.

v8:
- accept averaging rate values more flexibly and round them to the nearest
  correct value
- don't call ina2xx_update_device() in ina226_set_avg()
- make sure the registers are going to be re-read after setting the averaging
  rate

v7:
https://www.mail-archive.com/linux-kernel%40vger.kernel.org/msg787851.html

Bartosz Golaszewski (5):
  hwmon: ina2xx: reinitialize the chip in case it's been reset
  hwmon: ina2xx: remove a stray new line
  hwmon: ina2xx: don't accept shunt values greater than the calibration factor
  hwmon: ina2xx: make shunt resistance configurable at run-time
  hwmon: ina2xx: allow to change the averaging rate at run-time

 Documentation/hwmon/ina2xx |   8 +-
 drivers/hwmon/ina2xx.c     | 301 +++++++++++++++++++++++++++++++++++++++------
 2 files changed, 266 insertions(+), 43 deletions(-)

-- 
2.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/