| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAN+gG=Fhaj2aQM7gxXZBaXx3MZQbdMdCZ7KO=nmhzufp4YqnmA@mail.gmail.com>
Date: Mon, 5 Jan 2015 14:24:30 -0500
From: Benjamin Tissoires <benjamin.tissoires@...il.com>
To: Gabriele Mazzotta <gabriele.mzt@...il.com>,
Peter Hutterer <peter.hutterer@...-t.net>,
Hans de Goede <hdegoede@...hat.com>
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Henrik Rydberg <rydberg@...omail.se>,
linux-input <linux-input@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Maxwell Anselm <silverhammermba@...il.com>
Subject: Re: [PATCH 1/2] input: synaptics - make image sensors report ABS_MT_TOUCH_MAJOR
Hi Gabriele,
[Adding Peter and Hans as this change will impact both
xf86-input-synaptics and libinput]
On Sat, Dec 27, 2014 at 6:31 AM, Gabriele Mazzotta
<gabriele.mzt@...il.com> wrote:
> Despite claiming to be able to report ABS_TOOL_WIDTH, image sensors
> were not doing it. Make them report widths and use ABS_MT_TOUCH_MAJOR
> instead ABS_TOOL_WIDTH.
It looks like the current xorg-synaptics code already handles
ABS_MT_TOUCH_MAJOR as finger_width. So I think we should be good in
replacing the ABS_TOOL_WIDTH event. However, I'd prefer having Peter
confirm this because xorg-synaptics still relies a lot on the single
touch emulation.
>
> Since the 'w' slot is used to report the finger count when two or more
> fingers are on the touchpad, make sure that only meaningful values are
> emitted, i.e. values greater than or equal to 4, and assign the correct
> range to ABS_MT_TOUCH_MAJOR.
>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=77161
> Signed-off-by: Gabriele Mazzotta <gabriele.mzt@...il.com>
> ---
> drivers/input/mouse/synaptics.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
> index f947292..ea0563e 100644
> --- a/drivers/input/mouse/synaptics.c
> +++ b/drivers/input/mouse/synaptics.c
> @@ -814,6 +814,8 @@ static void synaptics_report_slot(struct input_dev *dev, int slot,
Just FYI, this does not apply anymore on top of Dmitry's tree.
synaptics_report_slot() has been removed, and you should now report
the slot state in synaptics_report_mt_data().
> input_report_abs(dev, ABS_MT_POSITION_X, hw->x);
> input_report_abs(dev, ABS_MT_POSITION_Y, synaptics_invert_y(hw->y));
> input_report_abs(dev, ABS_MT_PRESSURE, hw->z);
> + if (hw->w >= 4)
That I don't like. IMO, at this point, .w should only contain the
finger width, unconditionally.
Also, with 2/2, .w is computed accurately for the second finger, but
not for the first.
I tried to figure out a way to properly extract the actual width
information from the sgm packet when the w is 0 or 1, and the only way
I found was to do the fix in synaptics_image_sensor_process(). I would
have preferred dealing with that in synaptics_parse_hw_state()
directly, but I think the final code would be more and more ugly.
Dealing with the true finger width in synaptics_image_sensor_process()
is not a problem for cr48 sensors, because they will not have the
ABS_MT_TOUCH_MAJOR event exported.
Anyway, something like that "should" work (sorry for the tab/space,
gmail in use), of course, this is untested when I send the mail :) :
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 95c15451..caf7ccd 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -852,6 +852,17 @@ static void synaptics_image_sensor_process(struct
psmouse *psmouse,
else
num_fingers = 4;
+ /* When multiple fingers are on the TouchPad, the width is encoded in
+ * X, Y and Z */
+ if (sgm->w == 0 || sgm->w == 1) {
+ sgm->w = ((sgm->x & BIT(1)) >> 1) |
+ (sgm->y & BIT(1)) |
+ ((sgm->z & BIT(0)) << 1);
+ sgm->x &= ~BIT(1);
+ sgm->y &= ~BIT(1);
+ sgm->z &= ~BIT(0);
+ }
+
/* Send resulting input events to user space */
synaptics_report_mt_data(psmouse, sgm, num_fingers);
}
> + input_report_abs(dev, ABS_MT_TOUCH_MAJOR, hw->w);
> }
>
> static void synaptics_report_mt_data(struct psmouse *psmouse,
> @@ -1462,8 +1464,13 @@ static void set_input_params(struct psmouse *psmouse,
> INPUT_MT_TRACK : INPUT_MT_SEMI_MT));
> }
>
> - if (SYN_CAP_PALMDETECT(priv->capabilities))
> - input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
> + if (SYN_CAP_PALMDETECT(priv->capabilities)) {
> + if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c))
> + input_set_abs_params(dev,
> + ABS_MT_TOUCH_MAJOR, 4, 15, 0, 0);
> + else
> + input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
> + }
Again, I'd prefer having Peter's point of view here.
If we really need both, we will need to change input-mt to also
emulate ABS_TOOL_WIDTH from ABS_MT_TOUCH_MAJOR like we do between
ABS_MT_POSITION_X|Y and ABS_X|Y.
Cheers,
Benjamin
>
> __set_bit(BTN_TOUCH, dev->keybit);
> __set_bit(BTN_TOOL_FINGER, dev->keybit);
> --
> 2.1.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists