| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150105194305.GB1513@betelgeuse.hsd1.ma.comcast.net> Date: Mon, 5 Jan 2015 14:43:05 -0500 From: Christoph Jaeger <cj@...ux.com> To: yann.morin.1998@...e.fr, akpm@...ux-foundation.org Cc: linux-kbuild@...r.kernel.org, linux-kernel@...r.kernel.org, dborkman@...hat.com, pebolle@...cali.nl, Michal Marek <mmarek@...e.cz> Subject: Re: [PATCH] kconfig: use bool instead of boolean for type definition attributes (adding Michal Marek) On Sat, Dec 20, 2014 at 03:41:11PM -0500, Christoph Jaeger wrote: > Support for keyword 'boolean' will be dropped later on. > > No functional change. > > Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com > Signed-off-by: Christoph Jaeger <cj@...ux.com> > --- > arch/mips/pmcs-msp71xx/Kconfig | 6 +++--- > drivers/connector/Kconfig | 2 +- > drivers/hwmon/Kconfig | 2 +- > drivers/hwmon/pmbus/Kconfig | 2 +- > drivers/i2c/Kconfig | 4 ++-- > drivers/iio/Kconfig | 4 ++-- > drivers/isdn/hardware/mISDN/Kconfig | 2 +- > drivers/md/Kconfig | 4 ++-- > drivers/md/persistent-data/Kconfig | 2 +- > drivers/net/ethernet/ti/Kconfig | 4 ++-- > drivers/net/usb/Kconfig | 12 ++++++------ > drivers/net/wireless/rt2x00/Kconfig | 6 +++--- > drivers/pci/pcie/aer/Kconfig | 2 +- > drivers/rtc/Kconfig | 8 ++++---- > drivers/spi/Kconfig | 6 +++--- > drivers/staging/board/Kconfig | 2 +- > drivers/staging/emxx_udc/Kconfig | 2 +- > drivers/staging/iio/Kconfig | 4 ++-- > drivers/tty/serial/Kconfig | 2 +- > drivers/usb/gadget/Kconfig | 34 +++++++++++++++++----------------- > drivers/usb/gadget/legacy/Kconfig | 2 +- > drivers/usb/gadget/udc/Kconfig | 4 ++-- > drivers/usb/phy/Kconfig | 2 +- > init/Kconfig | 4 ++-- > lib/Kconfig | 30 +++++++++++++++--------------- > mm/Kconfig | 22 +++++++++++----------- > net/Kconfig | 14 +++++++------- > net/sched/Kconfig | 2 +- > net/switchdev/Kconfig | 2 +- > security/integrity/Kconfig | 4 ++-- > security/integrity/evm/Kconfig | 2 +- > 31 files changed, 99 insertions(+), 99 deletions(-) > > diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig > index 6073ca4..4190093 100644 > --- a/arch/mips/pmcs-msp71xx/Kconfig > +++ b/arch/mips/pmcs-msp71xx/Kconfig > @@ -36,14 +36,14 @@ config PMC_MSP7120_FPGA > endchoice > > config MSP_HAS_USB > - boolean > + bool > depends on PMC_MSP > > config MSP_ETH > - boolean > + bool > select MSP_HAS_MAC > depends on PMC_MSP > > config MSP_HAS_MAC > - boolean > + bool > depends on PMC_MSP > diff --git a/drivers/connector/Kconfig b/drivers/connector/Kconfig > index 6e6730f..3de5f3a 100644 > --- a/drivers/connector/Kconfig > +++ b/drivers/connector/Kconfig > @@ -12,7 +12,7 @@ menuconfig CONNECTOR > if CONNECTOR > > config PROC_EVENTS > - boolean "Report process events to userspace" > + bool "Report process events to userspace" > depends on CONNECTOR=y > default y > ---help--- > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 6529c09..33149a4 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -1595,7 +1595,7 @@ config SENSORS_W83795 > will be called w83795. > > config SENSORS_W83795_FANCTRL > - boolean "Include automatic fan control support (DANGEROUS)" > + bool "Include automatic fan control support (DANGEROUS)" > depends on SENSORS_W83795 > default n > help > diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig > index a674cd8..9f7dbd1 100644 > --- a/drivers/hwmon/pmbus/Kconfig > +++ b/drivers/hwmon/pmbus/Kconfig > @@ -57,7 +57,7 @@ config SENSORS_LTC2978 > be called ltc2978. > > config SENSORS_LTC2978_REGULATOR > - boolean "Regulator support for LTC2978 and compatibles" > + bool "Regulator support for LTC2978 and compatibles" > depends on SENSORS_LTC2978 && REGULATOR > help > If you say yes here you get regulator support for Linear > diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig > index 8c9e619..78fbee4 100644 > --- a/drivers/i2c/Kconfig > +++ b/drivers/i2c/Kconfig > @@ -35,11 +35,11 @@ config ACPI_I2C_OPREGION > if I2C > > config I2C_BOARDINFO > - boolean > + bool > default y > > config I2C_COMPAT > - boolean "Enable compatibility bits for old user-space" > + bool "Enable compatibility bits for old user-space" > default y > help > Say Y here if you intend to run lm-sensors 3.1.1 or older, or any > diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig > index 345395e..397c8df 100644 > --- a/drivers/iio/Kconfig > +++ b/drivers/iio/Kconfig > @@ -21,7 +21,7 @@ config IIO_BUFFER > if IIO_BUFFER > > config IIO_BUFFER_CB > -boolean "IIO callback buffer used for push in-kernel interfaces" > + bool "IIO callback buffer used for push in-kernel interfaces" > help > Should be selected by any drivers that do in-kernel push > usage. That is, those where the data is pushed to the consumer. > @@ -44,7 +44,7 @@ config IIO_TRIGGERED_BUFFER > endif # IIO_BUFFER > > config IIO_TRIGGER > - boolean "Enable triggered sampling support" > + bool "Enable triggered sampling support" > help > Provides IIO core support for triggers. Currently these > are used to initialize capture of samples to push into > diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig > index b8611e3..09df54f 100644 > --- a/drivers/isdn/hardware/mISDN/Kconfig > +++ b/drivers/isdn/hardware/mISDN/Kconfig > @@ -24,7 +24,7 @@ config MISDN_HFCMULTI > * HFC-E1 (E1 interface for 2Mbit ISDN) > > config MISDN_HFCMULTI_8xx > - boolean "Support for XHFC embedded board in HFC multiport driver" > + bool "Support for XHFC embedded board in HFC multiport driver" > depends on MISDN > depends on MISDN_HFCMULTI > depends on 8xx > diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig > index 5bdedf6..1cd9cf8 100644 > --- a/drivers/md/Kconfig > +++ b/drivers/md/Kconfig > @@ -177,7 +177,7 @@ config MD_FAULTY > source "drivers/md/bcache/Kconfig" > > config BLK_DEV_DM_BUILTIN > - boolean > + bool > > config BLK_DEV_DM > tristate "Device mapper support" > @@ -196,7 +196,7 @@ config BLK_DEV_DM > If unsure, say N. > > config DM_DEBUG > - boolean "Device mapper debugging support" > + bool "Device mapper debugging support" > depends on BLK_DEV_DM > ---help--- > Enable this for messages that may help debug device-mapper problems. > diff --git a/drivers/md/persistent-data/Kconfig b/drivers/md/persistent-data/Kconfig > index 0c2dec7..78c74bb 100644 > --- a/drivers/md/persistent-data/Kconfig > +++ b/drivers/md/persistent-data/Kconfig > @@ -8,7 +8,7 @@ config DM_PERSISTENT_DATA > device-mapper targets such as the thin provisioning target. > > config DM_DEBUG_BLOCK_STACK_TRACING > - boolean "Keep stack trace of persistent data block lock holders" > + bool "Keep stack trace of persistent data block lock holders" > depends on STACKTRACE_SUPPORT && DM_PERSISTENT_DATA > select STACKTRACE > ---help--- > diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig > index 605dd90..ca37fb2 100644 > --- a/drivers/net/ethernet/ti/Kconfig > +++ b/drivers/net/ethernet/ti/Kconfig > @@ -50,7 +50,7 @@ config TI_DAVINCI_CPDMA > will be called davinci_cpdma. This is recommended. > > config TI_CPSW_PHY_SEL > - boolean "TI CPSW Switch Phy sel Support" > + bool "TI CPSW Switch Phy sel Support" > depends on TI_CPSW > ---help--- > This driver supports configuring of the phy mode connected to > @@ -71,7 +71,7 @@ config TI_CPSW > will be called cpsw. > > config TI_CPTS > - boolean "TI Common Platform Time Sync (CPTS) Support" > + bool "TI Common Platform Time Sync (CPTS) Support" > depends on TI_CPSW > select PTP_1588_CLOCK > ---help--- > diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig > index 37eed4d..3bd9678 100644 > --- a/drivers/net/usb/Kconfig > +++ b/drivers/net/usb/Kconfig > @@ -397,14 +397,14 @@ config USB_NET_CDC_SUBSET > not generally have permanently assigned Ethernet addresses. > > config USB_ALI_M5632 > - boolean "ALi M5632 based 'USB 2.0 Data Link' cables" > + bool "ALi M5632 based 'USB 2.0 Data Link' cables" > depends on USB_NET_CDC_SUBSET > help > Choose this option if you're using a host-to-host cable > based on this design, which supports USB 2.0 high speed. > > config USB_AN2720 > - boolean "AnchorChips 2720 based cables (Xircom PGUNET, ...)" > + bool "AnchorChips 2720 based cables (Xircom PGUNET, ...)" > depends on USB_NET_CDC_SUBSET > help > Choose this option if you're using a host-to-host cable > @@ -412,7 +412,7 @@ config USB_AN2720 > Cypress brand. > > config USB_BELKIN > - boolean "eTEK based host-to-host cables (Advance, Belkin, ...)" > + bool "eTEK based host-to-host cables (Advance, Belkin, ...)" > depends on USB_NET_CDC_SUBSET > default y > help > @@ -421,7 +421,7 @@ config USB_BELKIN > microcontroller, with LEDs that indicate traffic. > > config USB_ARMLINUX > - boolean "Embedded ARM Linux links (iPaq, ...)" > + bool "Embedded ARM Linux links (iPaq, ...)" > depends on USB_NET_CDC_SUBSET > default y > help > @@ -438,14 +438,14 @@ config USB_ARMLINUX > this simpler protocol by installing a different kernel. > > config USB_EPSON2888 > - boolean "Epson 2888 based firmware (DEVELOPMENT)" > + bool "Epson 2888 based firmware (DEVELOPMENT)" > depends on USB_NET_CDC_SUBSET > help > Choose this option to support the usb networking links used > by some sample firmware from Epson. > > config USB_KC2190 > - boolean "KT Technology KC2190 based cables (InstaNet)" > + bool "KT Technology KC2190 based cables (InstaNet)" > depends on USB_NET_CDC_SUBSET > help > Choose this option if you're using a host-to-host cable > diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig > index 006b8bc..2b4ef25 100644 > --- a/drivers/net/wireless/rt2x00/Kconfig > +++ b/drivers/net/wireless/rt2x00/Kconfig > @@ -243,14 +243,14 @@ config RT2X00_LIB > select AVERAGE > > config RT2X00_LIB_FIRMWARE > - boolean > + bool > select FW_LOADER > > config RT2X00_LIB_CRYPTO > - boolean > + bool > > config RT2X00_LIB_LEDS > - boolean > + bool > default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n) > > config RT2X00_LIB_DEBUGFS > diff --git a/drivers/pci/pcie/aer/Kconfig b/drivers/pci/pcie/aer/Kconfig > index 3894402..7d1437b 100644 > --- a/drivers/pci/pcie/aer/Kconfig > +++ b/drivers/pci/pcie/aer/Kconfig > @@ -3,7 +3,7 @@ > # > > config PCIEAER > - boolean "Root Port Advanced Error Reporting support" > + bool "Root Port Advanced Error Reporting support" > depends on PCIEPORTBUS > select RAS > default y > diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig > index f15cddf..1de1ea5 100644 > --- a/drivers/rtc/Kconfig > +++ b/drivers/rtc/Kconfig > @@ -65,7 +65,7 @@ config RTC_DEBUG > comment "RTC interfaces" > > config RTC_INTF_SYSFS > - boolean "/sys/class/rtc/rtcN (sysfs)" > + bool "/sys/class/rtc/rtcN (sysfs)" > depends on SYSFS > default RTC_CLASS > help > @@ -75,7 +75,7 @@ config RTC_INTF_SYSFS > If unsure, say Y. > > config RTC_INTF_PROC > - boolean "/proc/driver/rtc (procfs for rtcN)" > + bool "/proc/driver/rtc (procfs for rtcN)" > depends on PROC_FS > default RTC_CLASS > help > @@ -88,7 +88,7 @@ config RTC_INTF_PROC > If unsure, say Y. > > config RTC_INTF_DEV > - boolean "/dev/rtcN (character devices)" > + bool "/dev/rtcN (character devices)" > default RTC_CLASS > help > Say yes here if you want to use your RTCs using the /dev > @@ -455,7 +455,7 @@ config RTC_DRV_DM355EVM > Supports the RTC firmware in the MSP430 on the DM355 EVM. > > config RTC_DRV_TWL92330 > - boolean "TI TWL92330/Menelaus" > + bool "TI TWL92330/Menelaus" > depends on MENELAUS > help > If you say yes here you get support for the RTC on the > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig > index 9982998..ef302c7 100644 > --- a/drivers/spi/Kconfig > +++ b/drivers/spi/Kconfig > @@ -29,7 +29,7 @@ menuconfig SPI > if SPI > > config SPI_DEBUG > - boolean "Debug support for SPI drivers" > + bool "Debug support for SPI drivers" > depends on DEBUG_KERNEL > help > Say "yes" to enable debug messaging (like dev_dbg and pr_debug), > @@ -40,8 +40,8 @@ config SPI_DEBUG > # > > config SPI_MASTER > -# boolean "SPI Master Support" > - boolean > +# bool "SPI Master Support" > + bool > default SPI > help > If your system has an master-capable SPI controller (which > diff --git a/drivers/staging/board/Kconfig b/drivers/staging/board/Kconfig > index 7eda0b8..0a89ad1 100644 > --- a/drivers/staging/board/Kconfig > +++ b/drivers/staging/board/Kconfig > @@ -1,5 +1,5 @@ > config STAGING_BOARD > - boolean "Staging Board Support" > + bool "Staging Board Support" > depends on OF_ADDRESS > depends on BROKEN > help > diff --git a/drivers/staging/emxx_udc/Kconfig b/drivers/staging/emxx_udc/Kconfig > index 9bc6d3d..cc34020 100644 > --- a/drivers/staging/emxx_udc/Kconfig > +++ b/drivers/staging/emxx_udc/Kconfig > @@ -1,5 +1,5 @@ > config USB_EMXX > - boolean "EMXX USB Function Device Controller" > + bool "EMXX USB Function Device Controller" > depends on USB_GADGET && (ARCH_SHMOBILE || (ARM && COMPILE_TEST)) > help > The Emma Mobile series of SoCs from Renesas Electronics and > diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig > index fa38be0..2418302 100644 > --- a/drivers/staging/iio/Kconfig > +++ b/drivers/staging/iio/Kconfig > @@ -30,13 +30,13 @@ config IIO_SIMPLE_DUMMY > if IIO_SIMPLE_DUMMY > > config IIO_SIMPLE_DUMMY_EVENTS > - boolean "Event generation support" > + bool "Event generation support" > select IIO_DUMMY_EVGEN > help > Add some dummy events to the simple dummy driver. > > config IIO_SIMPLE_DUMMY_BUFFER > - boolean "Buffered capture support" > + bool "Buffered capture support" > select IIO_BUFFER > select IIO_KFIFO_BUF > help > diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig > index c79b43c..9f439fa 100644 > --- a/drivers/tty/serial/Kconfig > +++ b/drivers/tty/serial/Kconfig > @@ -498,7 +498,7 @@ config SERIAL_MFD_HSU > select SERIAL_CORE > > config SERIAL_MFD_HSU_CONSOLE > - boolean "Medfile HSU serial console support" > + bool "Medfile HSU serial console support" > depends on SERIAL_MFD_HSU=y > select SERIAL_CORE_CONSOLE > > diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig > index 747ef53..c523f94 100644 > --- a/drivers/usb/gadget/Kconfig > +++ b/drivers/usb/gadget/Kconfig > @@ -45,7 +45,7 @@ menuconfig USB_GADGET > if USB_GADGET > > config USB_GADGET_DEBUG > - boolean "Debugging messages (DEVELOPMENT)" > + bool "Debugging messages (DEVELOPMENT)" > depends on DEBUG_KERNEL > help > Many controller and gadget drivers will print some debugging > @@ -73,7 +73,7 @@ config USB_GADGET_VERBOSE > production build. > > config USB_GADGET_DEBUG_FILES > - boolean "Debugging information files (DEVELOPMENT)" > + bool "Debugging information files (DEVELOPMENT)" > depends on PROC_FS > help > Some of the drivers in the "gadget" framework can expose > @@ -84,7 +84,7 @@ config USB_GADGET_DEBUG_FILES > here. If in doubt, or to conserve kernel memory, say "N". > > config USB_GADGET_DEBUG_FS > - boolean "Debugging information files in debugfs (DEVELOPMENT)" > + bool "Debugging information files in debugfs (DEVELOPMENT)" > depends on DEBUG_FS > help > Some of the drivers in the "gadget" framework can expose > @@ -230,7 +230,7 @@ config USB_CONFIGFS > For more information see Documentation/usb/gadget_configfs.txt. > > config USB_CONFIGFS_SERIAL > - boolean "Generic serial bulk in/out" > + bool "Generic serial bulk in/out" > depends on USB_CONFIGFS > depends on TTY > select USB_U_SERIAL > @@ -239,7 +239,7 @@ config USB_CONFIGFS_SERIAL > The function talks to the Linux-USB generic serial driver. > > config USB_CONFIGFS_ACM > - boolean "Abstract Control Model (CDC ACM)" > + bool "Abstract Control Model (CDC ACM)" > depends on USB_CONFIGFS > depends on TTY > select USB_U_SERIAL > @@ -249,7 +249,7 @@ config USB_CONFIGFS_ACM > MS-Windows hosts or with the Linux-USB "cdc-acm" driver. > > config USB_CONFIGFS_OBEX > - boolean "Object Exchange Model (CDC OBEX)" > + bool "Object Exchange Model (CDC OBEX)" > depends on USB_CONFIGFS > depends on TTY > select USB_U_SERIAL > @@ -259,7 +259,7 @@ config USB_CONFIGFS_OBEX > since the kernel itself doesn't implement the OBEX protocol. > > config USB_CONFIGFS_NCM > - boolean "Network Control Model (CDC NCM)" > + bool "Network Control Model (CDC NCM)" > depends on USB_CONFIGFS > depends on NET > select USB_U_ETHER > @@ -270,7 +270,7 @@ config USB_CONFIGFS_NCM > different alignment possibilities. > > config USB_CONFIGFS_ECM > - boolean "Ethernet Control Model (CDC ECM)" > + bool "Ethernet Control Model (CDC ECM)" > depends on USB_CONFIGFS > depends on NET > select USB_U_ETHER > @@ -282,7 +282,7 @@ config USB_CONFIGFS_ECM > supported by firmware for smart network devices. > > config USB_CONFIGFS_ECM_SUBSET > - boolean "Ethernet Control Model (CDC ECM) subset" > + bool "Ethernet Control Model (CDC ECM) subset" > depends on USB_CONFIGFS > depends on NET > select USB_U_ETHER > @@ -323,7 +323,7 @@ config USB_CONFIGFS_EEM > the host is the same (a usbX device), so the differences are minimal. > > config USB_CONFIGFS_PHONET > - boolean "Phonet protocol" > + bool "Phonet protocol" > depends on USB_CONFIGFS > depends on NET > depends on PHONET > @@ -333,7 +333,7 @@ config USB_CONFIGFS_PHONET > The Phonet protocol implementation for USB device. > > config USB_CONFIGFS_MASS_STORAGE > - boolean "Mass storage" > + bool "Mass storage" > depends on USB_CONFIGFS > depends on BLOCK > select USB_F_MASS_STORAGE > @@ -344,7 +344,7 @@ config USB_CONFIGFS_MASS_STORAGE > specified as a module parameter or sysfs option. > > config USB_CONFIGFS_F_LB_SS > - boolean "Loopback and sourcesink function (for testing)" > + bool "Loopback and sourcesink function (for testing)" > depends on USB_CONFIGFS > select USB_F_SS_LB > help > @@ -357,7 +357,7 @@ config USB_CONFIGFS_F_LB_SS > and its driver through a basic set of functional tests. > > config USB_CONFIGFS_F_FS > - boolean "Function filesystem (FunctionFS)" > + bool "Function filesystem (FunctionFS)" > depends on USB_CONFIGFS > select USB_F_FS > help > @@ -369,7 +369,7 @@ config USB_CONFIGFS_F_FS > mass storage) and other are implemented in user space. > > config USB_CONFIGFS_F_UAC1 > - boolean "Audio Class 1.0" > + bool "Audio Class 1.0" > depends on USB_CONFIGFS > depends on SND > select USB_LIBCOMPOSITE > @@ -382,7 +382,7 @@ config USB_CONFIGFS_F_UAC1 > on the device. > > config USB_CONFIGFS_F_UAC2 > - boolean "Audio Class 2.0" > + bool "Audio Class 2.0" > depends on USB_CONFIGFS > depends on SND > select USB_LIBCOMPOSITE > @@ -400,7 +400,7 @@ config USB_CONFIGFS_F_UAC2 > wants as audio data to the USB Host. > > config USB_CONFIGFS_F_MIDI > - boolean "MIDI function" > + bool "MIDI function" > depends on USB_CONFIGFS > depends on SND > select USB_LIBCOMPOSITE > @@ -414,7 +414,7 @@ config USB_CONFIGFS_F_MIDI > ALSA's aconnect utility etc. > > config USB_CONFIGFS_F_HID > - boolean "HID function" > + bool "HID function" > depends on USB_CONFIGFS > select USB_F_HID > help > diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig > index fd48ef3a..113c87e 100644 > --- a/drivers/usb/gadget/legacy/Kconfig > +++ b/drivers/usb/gadget/legacy/Kconfig > @@ -40,7 +40,7 @@ config USB_ZERO > dynamically linked module called "g_zero". > > config USB_ZERO_HNPTEST > - boolean "HNP Test Device" > + bool "HNP Test Device" > depends on USB_ZERO && USB_OTG > help > You can configure this device to enumerate using the device > diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig > index b8e213e..674adfe 100644 > --- a/drivers/usb/gadget/udc/Kconfig > +++ b/drivers/usb/gadget/udc/Kconfig > @@ -198,7 +198,7 @@ config USB_S3C2410 > S3C2440 processors. > > config USB_S3C2410_DEBUG > - boolean "S3C2410 udc debug messages" > + bool "S3C2410 udc debug messages" > depends on USB_S3C2410 > > config USB_S3C_HSUDC > @@ -287,7 +287,7 @@ config USB_NET2272 > gadget drivers to also be dynamically linked. > > config USB_NET2272_DMA > - boolean "Support external DMA controller" > + bool "Support external DMA controller" > depends on USB_NET2272 && HAS_DMA > help > The NET2272 part can optionally support an external DMA > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig > index c6d0c8e..52d3d58 100644 > --- a/drivers/usb/phy/Kconfig > +++ b/drivers/usb/phy/Kconfig > @@ -119,7 +119,7 @@ config TAHVO_USB > > config TAHVO_USB_HOST_BY_DEFAULT > depends on TAHVO_USB > - boolean "Device in USB host mode by default" > + bool "Device in USB host mode by default" > help > Say Y here, if you want the device to enter USB host mode > by default on bootup. > diff --git a/init/Kconfig b/init/Kconfig > index 9afb971..643b221 100644 > --- a/init/Kconfig > +++ b/init/Kconfig > @@ -914,7 +914,7 @@ config NUMA_BALANCING_DEFAULT_ENABLED > machine. > > menuconfig CGROUPS > - boolean "Control Group support" > + bool "Control Group support" > select KERNFS > help > This option adds support for grouping sets of processes together, for > @@ -1770,7 +1770,7 @@ config SLABINFO > default y > > config RT_MUTEXES > - boolean > + bool > > config BASE_SMALL > int > diff --git a/lib/Kconfig b/lib/Kconfig > index 54cf309..75da4d3 100644 > --- a/lib/Kconfig > +++ b/lib/Kconfig > @@ -14,7 +14,7 @@ config BITREVERSE > tristate > > config RATIONAL > - boolean > + bool > > config GENERIC_STRNCPY_FROM_USER > bool > @@ -39,14 +39,14 @@ config GENERIC_IOMAP > select GENERIC_PCI_IOMAP > > config GENERIC_IO > - boolean > + bool > default n > > config STMP_DEVICE > bool > > config PERCPU_RWSEM > - boolean > + bool > > config ARCH_USE_CMPXCHG_LOCKREF > bool > @@ -257,7 +257,7 @@ config DECOMPRESS_LZ4 > # Generic allocator support is selected if needed > # > config GENERIC_ALLOCATOR > - boolean > + bool > > # > # reed solomon support is select'ed if needed > @@ -266,16 +266,16 @@ config REED_SOLOMON > tristate > > config REED_SOLOMON_ENC8 > - boolean > + bool > > config REED_SOLOMON_DEC8 > - boolean > + bool > > config REED_SOLOMON_ENC16 > - boolean > + bool > > config REED_SOLOMON_DEC16 > - boolean > + bool > > # > # BCH support is selected if needed > @@ -284,7 +284,7 @@ config BCH > tristate > > config BCH_CONST_PARAMS > - boolean > + bool > help > Drivers may select this option to force specific constant > values for parameters 'm' (Galois field order) and 't' > @@ -320,7 +320,7 @@ config BCH_CONST_T > # Textsearch support is select'ed if needed > # > config TEXTSEARCH > - boolean > + bool > > config TEXTSEARCH_KMP > tristate > @@ -332,10 +332,10 @@ config TEXTSEARCH_FSM > tristate > > config BTREE > - boolean > + bool > > config INTERVAL_TREE > - boolean > + bool > help > Simple, embeddable, interval-tree. Can find the start of an > overlapping range in log(n) time and then iterate over all > @@ -363,18 +363,18 @@ config ASSOCIATIVE_ARRAY > for more information. > > config HAS_IOMEM > - boolean > + bool > depends on !NO_IOMEM > select GENERIC_IO > default y > > config HAS_IOPORT_MAP > - boolean > + bool > depends on HAS_IOMEM && !NO_IOPORT_MAP > default y > > config HAS_DMA > - boolean > + bool > depends on !NO_DMA > default y > > diff --git a/mm/Kconfig b/mm/Kconfig > index 1d1ae6b..3953f41 100644 > --- a/mm/Kconfig > +++ b/mm/Kconfig > @@ -129,28 +129,28 @@ config SPARSEMEM_VMEMMAP > efficient option when sufficient kernel resources are available. > > config HAVE_MEMBLOCK > - boolean > + bool > > config HAVE_MEMBLOCK_NODE_MAP > - boolean > + bool > > config HAVE_MEMBLOCK_PHYS_MAP > - boolean > + bool > > config HAVE_GENERIC_RCU_GUP > - boolean > + bool > > config ARCH_DISCARD_MEMBLOCK > - boolean > + bool > > config NO_BOOTMEM > - boolean > + bool > > config MEMORY_ISOLATION > - boolean > + bool > > config MOVABLE_NODE > - boolean "Enable to assign a node which has only movable memory" > + bool "Enable to assign a node which has only movable memory" > depends on HAVE_MEMBLOCK > depends on NO_BOOTMEM > depends on X86_64 > @@ -228,12 +228,12 @@ config SPLIT_PTLOCK_CPUS > default "4" > > config ARCH_ENABLE_SPLIT_PMD_PTLOCK > - boolean > + bool > > # > # support for memory balloon > config MEMORY_BALLOON > - boolean > + bool > > # > # support for memory balloon compaction > @@ -276,7 +276,7 @@ config MIGRATION > allocation instead of reclaiming. > > config ARCH_ENABLE_HUGEPAGE_MIGRATION > - boolean > + bool > > config PHYS_ADDR_T_64BIT > def_bool 64BIT || ARCH_PHYS_ADDR_T_64BIT > diff --git a/net/Kconfig b/net/Kconfig > index ff9ffc1..44dd578 100644 > --- a/net/Kconfig > +++ b/net/Kconfig > @@ -231,18 +231,18 @@ source "net/hsr/Kconfig" > source "net/switchdev/Kconfig" > > config RPS > - boolean > + bool > depends on SMP && SYSFS > default y > > config RFS_ACCEL > - boolean > + bool > depends on RPS > select CPU_RMAP > default y > > config XPS > - boolean > + bool > depends on SMP > default y > > @@ -254,18 +254,18 @@ config CGROUP_NET_PRIO > a per-interface basis. > > config CGROUP_NET_CLASSID > - boolean "Network classid cgroup" > + bool "Network classid cgroup" > depends on CGROUPS > ---help--- > Cgroup subsystem for use as general purpose socket classid marker that is > being used in cls_cgroup and for netfilter matching. > > config NET_RX_BUSY_POLL > - boolean > + bool > default y > > config BQL > - boolean > + bool > depends on SYSFS > select DQL > default y > @@ -282,7 +282,7 @@ config BPF_JIT > this feature changing /proc/sys/net/core/bpf_jit_enable > > config NET_FLOW_LIMIT > - boolean > + bool > depends on RPS > default y > ---help--- > diff --git a/net/sched/Kconfig b/net/sched/Kconfig > index c54c9d9..706af73 100644 > --- a/net/sched/Kconfig > +++ b/net/sched/Kconfig > @@ -348,7 +348,7 @@ config NET_SCH_PLUG > comment "Classification" > > config NET_CLS > - boolean > + bool > > config NET_CLS_BASIC > tristate "Elementary classification (BASIC)" > diff --git a/net/switchdev/Kconfig b/net/switchdev/Kconfig > index 1557545..86a47e1 100644 > --- a/net/switchdev/Kconfig > +++ b/net/switchdev/Kconfig > @@ -3,7 +3,7 @@ > # > > config NET_SWITCHDEV > - boolean "Switch (and switch-ish) device support (EXPERIMENTAL)" > + bool "Switch (and switch-ish) device support (EXPERIMENTAL)" > depends on INET > ---help--- > This module provides glue between core networking code and device > diff --git a/security/integrity/Kconfig b/security/integrity/Kconfig > index b76235a..73c457b 100644 > --- a/security/integrity/Kconfig > +++ b/security/integrity/Kconfig > @@ -16,7 +16,7 @@ config INTEGRITY > if INTEGRITY > > config INTEGRITY_SIGNATURE > - boolean "Digital signature verification using multiple keyrings" > + bool "Digital signature verification using multiple keyrings" > depends on KEYS > default n > select SIGNATURE > @@ -30,7 +30,7 @@ config INTEGRITY_SIGNATURE > usually only added from initramfs. > > config INTEGRITY_ASYMMETRIC_KEYS > - boolean "Enable asymmetric keys support" > + bool "Enable asymmetric keys support" > depends on INTEGRITY_SIGNATURE > default n > select ASYMMETRIC_KEY_TYPE > diff --git a/security/integrity/evm/Kconfig b/security/integrity/evm/Kconfig > index df586fa..bf19723 100644 > --- a/security/integrity/evm/Kconfig > +++ b/security/integrity/evm/Kconfig > @@ -1,5 +1,5 @@ > config EVM > - boolean "EVM support" > + bool "EVM support" > select KEYS > select ENCRYPTED_KEYS > select CRYPTO_HMAC > -- > 2.1.0 > Suggested-by: Daniel Borkmann <dborkman@...hat.com> Cheers, Chris -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists