| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 06 Jan 2015 08:52:42 +0900
From: AKASHI Takahiro <takahiro.akashi@...aro.org>
To: catalin.marinas@....com, will.deacon@....com
CC: dsaxena@...aro.org, Vijaya.Kumar@...iumnetworks.com,
linux-arm-kernel@...ts.infradead.org,
linaro-kernel@...ts.linaro.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: kgdb: fix single stepping
Hi Will,
What's the current status of this patch?
I'm pretty sure that the bug is reproducable and can be fixed
with my patch since I've got a report from another guy
who had the same problem and tried my patch.
Thanks,
-Takahiro AKASHI
On 10/21/2014 02:07 PM, AKASHI Takahiro wrote:
> I tried to verify kgdb in vanilla kernel on fast model, but it seems that
> the single stepping with kgdb doesn't work correctly since its first
> appearance at v3.15.
>
> On v3.15, 'stepi' command after breaking the kernel at some breakpoint
> steps forward to the next instruction, but the succeeding 'stepi' never
> goes beyond that.
> On v3.16, 'stepi' moves forward and stops at the next instruction just
> after enable_dbg in el1_dbg, and never goes beyond that. This variance of
> behavior seems to come in with the following patch in v3.16:
>
> commit 2a2830703a23 ("arm64: debug: avoid accessing mdscr_el1 on fault
> paths where possible")
>
> This patch
> (1) moves kgdb_disable_single_step() from 'c' command handling to single
> step handler.
> This makes sure that single stepping gets effective at every 's' command.
> Please note that, under the current implementation, single step bit in
> spsr, which is cleared by the first single stepping, will not be set
> again for the consecutive 's' commands because single step bit in mdscr
> is still kept on (that is, kernel_active_single_step() in
> kgdb_arch_handle_exception() is true).
> (2) re-implements kgdb_roundup_cpus() because the current implementation
> enabled interrupts naively. See below.
> (3) removes 'enable_dbg' in el1_dbg.
> Single step bit in mdscr is turned on in do_handle_exception()->
> kgdb_handle_expection() before returning to debugged context, and if
> debug exception is enabled in el1_dbg, we will see unexpected single-
> stepping in el1_dbg.
> Since v3.18, the following patch does the same:
> commit 1059c6bf8534 ("arm64: debug: don't re-enable debug exceptions
> on return from el1_dbg)
> (4) masks interrupts while single-stepping one instruction.
> If an interrupt is caught during processing a single-stepping, debug
> exception is unintentionally enabled by el1_irq's 'enable_dbg' before
> returning to debugged context.
> Thus, like in (2), we will see unexpected single-stepping in el1_irq.
>
> Basically (1) and (2) are for v3.15, (3) and (4) for v3.1[67].
>
> * issue fixed by (2):
> Without (2), we would see another problem if a breakpoint is set at
> interrupt-sensible places, like gic_handle_irq():
>
> KGDB: re-enter error: breakpoint removed ffffffc000081258
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 650 at kernel/debug/debug_core.c:435
> kgdb_handle_exception+0x1dc/0x1f4()
> Modules linked in:
> CPU: 0 PID: 650 Comm: sh Not tainted 3.17.0-rc2+ #177
> Call trace:
> [<ffffffc000087fac>] dump_backtrace+0x0/0x130
> [<ffffffc0000880ec>] show_stack+0x10/0x1c
> [<ffffffc0004d683c>] dump_stack+0x74/0xb8
> [<ffffffc0000ab824>] warn_slowpath_common+0x8c/0xb4
> [<ffffffc0000ab90c>] warn_slowpath_null+0x14/0x20
> [<ffffffc000121bfc>] kgdb_handle_exception+0x1d8/0x1f4
> [<ffffffc000092ffc>] kgdb_brk_fn+0x18/0x28
> [<ffffffc0000821c8>] brk_handler+0x9c/0xe8
> [<ffffffc0000811e8>] do_debug_exception+0x3c/0xac
> Exception stack(0xffffffc07e027650 to 0xffffffc07e027770)
> ...
> [<ffffffc000083cac>] el1_dbg+0x14/0x68
> [<ffffffc00012178c>] kgdb_cpu_enter+0x464/0x5c0
> [<ffffffc000121bb4>] kgdb_handle_exception+0x190/0x1f4
> [<ffffffc000092ffc>] kgdb_brk_fn+0x18/0x28
> [<ffffffc0000821c8>] brk_handler+0x9c/0xe8
> [<ffffffc0000811e8>] do_debug_exception+0x3c/0xac
> Exception stack(0xffffffc07e027ac0 to 0xffffffc07e027be0)
> ...
> [<ffffffc000083cac>] el1_dbg+0x14/0x68
> [<ffffffc00032e4b4>] __handle_sysrq+0x11c/0x190
> [<ffffffc00032e93c>] write_sysrq_trigger+0x4c/0x60
> [<ffffffc0001e7d58>] proc_reg_write+0x54/0x84
> [<ffffffc000192fa4>] vfs_write+0x98/0x1c8
> [<ffffffc0001939b0>] SyS_write+0x40/0xa0
>
> Once some interrupt occurs, a breakpoint at gic_handle_irq() triggers kgdb.
> Kgdb then calls kgdb_roundup_cpus() to sync with other cpus.
> Current kgdb_roundup_cpus() unmasks interrupts temporarily to
> use smp_call_function().
> This eventually allows another interrupt to occur and likely results in
> hitting a breakpoint at gic_handle_irq() again since debug exception is
> always enabled in el1_irq.
>
> We can avoid this issue by specifying "nokgdbroundup" in kernel parameter,
> but this will also leave other cpus be in unknown state in terms of kgdb,
> and may result in interfering with kgdb activity.
>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@...aro.org>
> ---
> arch/arm64/kernel/kgdb.c | 60 +++++++++++++++++++++++++++++++++++-----------
> 1 file changed, 46 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c
> index a0d10c5..81b5910 100644
> --- a/arch/arm64/kernel/kgdb.c
> +++ b/arch/arm64/kernel/kgdb.c
> @@ -19,9 +19,13 @@
> * along with this program. If not, see <http://www.gnu.org/licenses/>.
> */
>
> +#include <linux/cpumask.h>
> #include <linux/irq.h>
> +#include <linux/irq_work.h>
> #include <linux/kdebug.h>
> #include <linux/kgdb.h>
> +#include <linux/percpu.h>
> +#include <asm/ptrace.h>
> #include <asm/traps.h>
>
> struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
> @@ -95,6 +99,9 @@ struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
> { "fpcr", 4, -1 },
> };
>
> +static DEFINE_PER_CPU(unsigned int, kgdb_pstate);
> +static DEFINE_PER_CPU(struct irq_work, kgdb_irq_work);
> +
> char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
> {
> if (regno >= DBG_MAX_REG_NUM || regno < 0)
> @@ -176,18 +183,14 @@ int kgdb_arch_handle_exception(int exception_vector, int signo,
> * over and over again.
> */
> kgdb_arch_update_addr(linux_regs, remcom_in_buffer);
> - atomic_set(&kgdb_cpu_doing_single_step, -1);
> - kgdb_single_step = 0;
> -
> - /*
> - * Received continue command, disable single step
> - */
> - if (kernel_active_single_step())
> - kernel_disable_single_step();
>
> err = 0;
> break;
> case 's':
> + /* mask interrupts while single stepping */
> + __this_cpu_write(kgdb_pstate, linux_regs->pstate);
> + linux_regs->pstate |= PSR_I_BIT;
> +
> /*
> * Update step address value with address passed
> * with step packet.
> @@ -198,8 +201,6 @@ int kgdb_arch_handle_exception(int exception_vector, int signo,
> */
> kgdb_arch_update_addr(linux_regs, remcom_in_buffer);
> atomic_set(&kgdb_cpu_doing_single_step, raw_smp_processor_id());
> - kgdb_single_step = 1;
> -
> /*
> * Enable single step handling
> */
> @@ -229,6 +230,18 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int esr)
>
> static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned int esr)
> {
> + unsigned int pstate;
> +
> + kernel_disable_single_step();
> + atomic_set(&kgdb_cpu_doing_single_step, -1);
> +
> + /* restore interrupt mask status */
> + pstate = __this_cpu_read(kgdb_pstate);
> + if (pstate & PSR_I_BIT)
> + regs->pstate |= PSR_I_BIT;
> + else
> + regs->pstate &= ~PSR_I_BIT;
> +
> kgdb_handle_exception(1, SIGTRAP, 0, regs);
> return 0;
> }
> @@ -249,16 +262,27 @@ static struct step_hook kgdb_step_hook = {
> .fn = kgdb_step_brk_fn
> };
>
> -static void kgdb_call_nmi_hook(void *ignored)
> +static void kgdb_roundup_hook(struct irq_work *work)
> {
> kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
> }
>
> void kgdb_roundup_cpus(unsigned long flags)
> {
> - local_irq_enable();
> - smp_call_function(kgdb_call_nmi_hook, NULL, 0);
> - local_irq_disable();
> + int cpu;
> + struct cpumask mask;
> + struct irq_work *work;
> +
> + mask = *cpu_online_mask;
> + cpumask_clear_cpu(smp_processor_id(), &mask);
> + cpu = cpumask_first(&mask);
> + if (cpu >= nr_cpu_ids)
> + return;
> +
> + for_each_cpu(cpu, &mask) {
> + work = per_cpu_ptr(&kgdb_irq_work, cpu);
> + irq_work_queue_on(work, cpu);
> + }
> }
>
> static int __kgdb_notify(struct die_args *args, unsigned long cmd)
> @@ -299,6 +323,8 @@ static struct notifier_block kgdb_notifier = {
> int kgdb_arch_init(void)
> {
> int ret = register_die_notifier(&kgdb_notifier);
> + int cpu;
> + struct irq_work *work;
>
> if (ret != 0)
> return ret;
> @@ -306,6 +332,12 @@ int kgdb_arch_init(void)
> register_break_hook(&kgdb_brkpt_hook);
> register_break_hook(&kgdb_compiled_brkpt_hook);
> register_step_hook(&kgdb_step_hook);
> +
> + for_each_possible_cpu(cpu) {
> + work = per_cpu_ptr(&kgdb_irq_work, cpu);
> + init_irq_work(work, kgdb_roundup_hook);
> + }
> +
> return 0;
> }
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists