[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1420564094-1086-2-git-send-email-grmoore@opensource.altera.com>
Date: Tue, 6 Jan 2015 11:08:13 -0600
From: Graham Moore <grmoore@...nsource.altera.com>
To: <linux-mtd@...ts.infradead.org>
CC: David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
<linux-kernel@...r.kernel.org>,
Alan Tull <atull@...nsource.altera.com>,
Dinh Nguyen <dinguyen@...nsource.altera.com>,
Yves Vandervennet <yvanderv@...nsource.altera.com>,
Ezequiel Garcia <ezequiel@...guardiasur.com.ar>,
Graham Moore <grmoore@...nsource.altera.com>
Subject: [PATCH V2 2/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.
Signed-off-by: Graham Moore <grmoore@...nsource.altera.com>
---
.../devicetree/bindings/mtd/cadence_quadspi.txt | 50 ++++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
diff --git a/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
new file mode 100644
index 0000000..3a8ea1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
@@ -0,0 +1,50 @@
+* Cadence Quad SPI controller
+
+Required properties:
+- compatible : Should be "cdns,qspi-nor".
+- reg : Contains two entries, each of which is a tuple consisting of a
+ physical address and length. The first entry is the address and
+ length of the controller register set. The second entry is the
+ address and length of the QSPI Controller data area.
+- interrupts : Unit interrupt specifier for the controller interrupt.
+- clocks : phandle to the Quad SPI clock.
+- ext-decoder : Value of 0 means no external chipselect decoder is
+ connected, 1 means there is an external chipselect decoder connected.
+- fifo-depth : Size of the data FIFO in words.
+- bus-num : Number of the SPI bus to which the controller is connected.
+
+Optional subnodes:
+Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
+custom properties:
+- cdns,page-size : Size, in bytes, of the device's write page
+- cdns,block-size : Size of the device's erase block
+- cdns,read-delay : Selay for read capture logic, in clock cycles
+- cdns,tshsl-ns : Delay in master reference clocks for the length that the master mode chip select outputs are de-asserted between transactions.
+- cdns,tsd2d-ns : Delay in master reference clocks between one chip select being de-activated and the activation of another.
+- cdns,tchsh-ns : Delay in master reference clocks between last bit of current transaction and deasserting the device chip select (qspi_n_ss_out).
+- cdns,tslch-ns : Delay in master reference clocks between setting qspi_n_ss_out low and first bit transfer.
+
+Example:
+
+ qspi: spi@...05000 {
+ compatible = "cdns,qspi-nor";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xff705000 0x1000>,
+ <0xffa00000 0x1000>;
+ interrupts = <0 151 4>;
+ clocks = <&qspi_clk>;
+ ext-decoder = <0>;
+ fifo-depth = <128>;
+
+ flash0: n25q00@0 {
+ ...
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+ }
+ }
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists