lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150107061025.GB17069@jelly.redhat.com>
Date:	Wed, 7 Jan 2015 16:10:25 +1000
From:	Peter Hutterer <peter.hutterer@...-t.net>
To:	Benjamin Tissoires <benjamin.tissoires@...il.com>
Cc:	Gabriele Mazzotta <gabriele.mzt@...il.com>,
	Hans de Goede <hdegoede@...hat.com>,
	Dmitry Torokhov <dmitry.torokhov@...il.com>,
	Henrik Rydberg <rydberg@...omail.se>,
	linux-input <linux-input@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	Maxwell Anselm <silverhammermba@...il.com>
Subject: Re: [PATCH 1/2] input: synaptics - make image sensors report
 ABS_MT_TOUCH_MAJOR

On Mon, Jan 05, 2015 at 05:04:55PM -0500, Benjamin Tissoires wrote:
> On Mon, Jan 5, 2015 at 5:00 PM, Gabriele Mazzotta
> <gabriele.mzt@...il.com> wrote:
> > On Monday 05 January 2015 14:24:30 Benjamin Tissoires wrote:
> >> Hi Gabriele,
> >>
> >> [Adding Peter and Hans as this change will impact both
> >> xf86-input-synaptics and libinput]
> >>
> >> On Sat, Dec 27, 2014 at 6:31 AM, Gabriele Mazzotta
> >> <gabriele.mzt@...il.com> wrote:
> >> > Despite claiming to be able to report ABS_TOOL_WIDTH, image sensors
> >> > were not doing it. Make them report widths and use ABS_MT_TOUCH_MAJOR
> >> > instead ABS_TOOL_WIDTH.
> >>
> >> It looks like the current xorg-synaptics code already handles
> >> ABS_MT_TOUCH_MAJOR as finger_width. So I think we should be good in
> >> replacing the ABS_TOOL_WIDTH event. However, I'd prefer having Peter
> >> confirm this because xorg-synaptics still relies a lot on the single
> >> touch emulation.
> >>
> >> >
> >> > Since the 'w' slot is used to report the finger count when two or more
> >> > fingers are on the touchpad, make sure that only meaningful values are
> >> > emitted, i.e. values greater than or equal to 4, and assign the correct
> >> > range to ABS_MT_TOUCH_MAJOR.
> >> >
> >> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=77161
> >> > Signed-off-by: Gabriele Mazzotta <gabriele.mzt@...il.com>
> >> > ---
> >> >  drivers/input/mouse/synaptics.c | 11 +++++++++--
> >> >  1 file changed, 9 insertions(+), 2 deletions(-)
> >> >
> >> > diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
> >> > index f947292..ea0563e 100644
> >> > --- a/drivers/input/mouse/synaptics.c
> >> > +++ b/drivers/input/mouse/synaptics.c
> >> > @@ -814,6 +814,8 @@ static void synaptics_report_slot(struct input_dev *dev, int slot,
> >>
> >> Just FYI, this does not apply anymore on top of Dmitry's tree.
> >> synaptics_report_slot() has been removed, and you should now report
> >> the slot state in synaptics_report_mt_data().
> >>
> >> >         input_report_abs(dev, ABS_MT_POSITION_X, hw->x);
> >> >         input_report_abs(dev, ABS_MT_POSITION_Y, synaptics_invert_y(hw->y));
> >> >         input_report_abs(dev, ABS_MT_PRESSURE, hw->z);
> >> > +       if (hw->w >= 4)
> >>
> >> That I don't like. IMO, at this point, .w should only contain the
> >> finger width, unconditionally.
> >> Also, with 2/2, .w is computed accurately for the second finger, but
> >> not for the first.
> >>
> >> I tried to figure out a way to properly extract the actual width
> >> information from the sgm packet when the w is 0 or 1, and the only way
> >> I found was to do the fix in synaptics_image_sensor_process(). I would
> >> have preferred dealing with that in synaptics_parse_hw_state()
> >> directly, but I think the final code would be more and more ugly.
> >> Dealing with the true finger width in synaptics_image_sensor_process()
> >> is not a problem for cr48 sensors, because they will not have the
> >> ABS_MT_TOUCH_MAJOR event exported.
> >
> > Regarding the last part on cr48 sensors.
> > Currently these sensors are not reporting widths through ABS_TOOL_WIDTH
> > and I don't see what could go wrong if they start reporting
> > ABS_MT_TOUCH_MAJOR. If I understood correctly, they can report widths
> > only when one finger is on the touchpad. This means that they will
> > report widths through slot 0, but they won't through slot 1. Nothing
> > bad should happen.
> 
> I am not entirely sure. The entire purpose of having widht for palm
> detection is to filter palm from true finger events. So if we only
> have the width info on the first slot, it would be useless IMO.
> Still I agree with "nothing bad should happen" :)

fwiw, I found finger width _very_ unreliable for palm detection. from what I
recorded, both finger width and palm width ranges overlap to a large amount,
making width useless for anything that's not the whole hand on the
touchpad.

Cheers,
   Peter

> > I've just rebased my patches and included the support for cr48 sensors.
> > The only change I made was to change the default width value from
> > 5 to 4 since this is the minimum values these sensors can report
> > (according to the existing code).
> >
> > Anyway, should I simply include the changes you suggested to handle
> > widths of sgm packets in what will be the new 2/2?
> 
> Go ahead and include my changes in your 2/2. It's better to have a
> consistent commit.
> 
> Cheers,
> Benjamin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ