lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1420621722-7428-5-git-send-email-oliver+list@schinagl.nl>
Date:	Wed,  7 Jan 2015 10:08:42 +0100
From:	Olliver Schinagl <oliver+list@...inagl.nl>
To:	Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Linus Walleij <linus.walleij@...aro.org>,
	Alexandre Courbot <gnurou@...il.com>,
	Dmitry Torokhov <dmitry.torokhov@...il.com>,
	Bryan Wu <cooloney@...il.com>,
	Richard Purdie <rpurdie@...ys.net>
Cc:	Olliver Schinagl <oliver@...inagl.nl>,
	Robin Gong <b38343@...escale.com>,
	"Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
	Aaron Lu <aaron.lu@...el.com>,
	Mika Westerberg <mika.westerberg@...ux.intel.com>,
	Grant Likely <grant.likely@...aro.org>,
	Wolfram Sang <wsa@...-dreams.de>,
	Alexander Shiyan <shc_work@...l.ru>,
	Jingoo Han <jg1.han@...sung.com>, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
	linux-input@...r.kernel.org, linux-leds@...r.kernel.org
Subject: [PATCH v1 4/4] leds: no longer use unnamed gpios

From: Olliver Schinagl <oliver@...inagl.nl>

The gpio document says we should not use unnamed bindings for gpios.
This patch uses the 'led-' prefix to the gpios and updates code and
documents. Because the devm_get_gpiod_from_child() falls back to using
old-style unnamed gpios, we can update the code first, and update
dts files as time allows.

Signed-off-by: Olliver Schinagl <oliver@...inagl.nl>
---
 Documentation/devicetree/bindings/leds/leds-gpio.txt | 12 ++++++------
 drivers/leds/leds-gpio.c                             |  2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
index d544cf1..2c138cc 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
@@ -7,7 +7,7 @@ Each LED is represented as a sub-node of the gpio-leds device.  Each
 node's name represents the name of the corresponding LED.
 
 LED sub-node properties:
-- gpios :  Should specify the LED's GPIO, see "gpios property" in
+- led-gpios :  Should specify the LED's GPIO, see "gpios property" in
   Documentation/devicetree/bindings/gpio/gpio.txt.  Active low LEDs should be
   indicated using flags in the GPIO specifier.
 - label :  (optional)
@@ -32,12 +32,12 @@ leds {
 	compatible = "gpio-leds";
 	hdd {
 		label = "IDE Activity";
-		gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
+		led-gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
 		linux,default-trigger = "ide-disk";
 	};
 
 	fault {
-		gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
+		led-gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
 		/* Keep LED on if BIOS detected hardware fault */
 		default-state = "keep";
 	};
@@ -46,11 +46,11 @@ leds {
 run-control {
 	compatible = "gpio-leds";
 	red {
-		gpios = <&mpc8572 6 GPIO_ACTIVE_HIHG>;
+		led-gpios = <&mpc8572 6 GPIO_ACTIVE_HIHG>;
 		default-state = "off";
 	};
 	green {
-		gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
+		led-gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
 		default-state = "on";
 	};
 };
@@ -59,7 +59,7 @@ leds {
 	compatible = "gpio-leds";
 
 	charger-led {
-		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		led-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		linux,default-trigger = "max8903-charger-charging";
 		retain-state-suspended;
 	};
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 8e5af69..5b7bc84 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -184,7 +184,7 @@ static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev)
 		struct gpio_led led = {};
 		const char *state = NULL;
 
-		led.gpiod = devm_get_gpiod_from_child(dev, NULL, child);
+		led.gpiod = devm_get_gpiod_from_child(dev, "led", child);
 		if (IS_ERR(led.gpiod)) {
 			fwnode_handle_put(child);
 			goto err;
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ