[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1420628458-11459-1-git-send-email-bart.tanghe@thomasmore.be>
Date: Wed, 7 Jan 2015 12:00:58 +0100
From: Bart Tanghe <bart.tanghe@...masmore.be>
To: swarren@...dotorg.org, lee@...nel.org
Cc: thierry.reding@...il.com, robh+dt@...nel.org, pawel.moll@....com,
mark.rutland@....com, ijc+devicetree@...lion.org.uk,
galak@...eaurora.org, linux@....linux.org.uk,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rpi-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Bart Tanghe <bart.tanghe@...masmore.be>
Subject: [PATCH v2] ARM: dts: add bcm2835-pwm bindings
To probe the bcm2835-pwm driver properly, this dts bindings has to be added
to the bcm2835 dtsi file.
In expectation of a bcm2835 clock driver, I've added fixed-clock clock binding.
---
Changes in v2:
- status set to disabled
- follow the clock naming convention
Signed-off-by: Bart Tanghe <bart.tanghe@...masmore.be>
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 3342cb1..ba76bb4 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -146,6 +147,14 @@
interrupts = <1 9>;
};
+ pwm: pwm@...0e000 {
+ compatible = "brcm,bcm2835-pwm";
+ reg = <0x7e20c000 0x28>;
+ clocks = <&clk_pwm>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
arm-pmu {
compatible = "arm,arm1176-pmu";
};
@@ -179,5 +188,13 @@
clock-output-names = "spi";
clock-frequency = <250000000>;
};
+
+ clk_pwm: clock@3 {
+ compatible = "fixed-clock";
+ reg = <3>;
+ #clock-cells = <0>;
+ clock-output-names = "pwm";
+ clock-frequency = <9200000>;
+ };
};
};
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists