[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2E89032DDAA8B9408CB92943514A0337AB526A19@SW-EX-MBX01.diasemi.com>
Date: Wed, 7 Jan 2015 16:03:50 +0000
From: "Opensource [Adam Thomson]" <Adam.Thomson.Opensource@...semi.com>
To: Jonathan Cameron <jic23@...nel.org>,
"Opensource [Adam Thomson]" <Adam.Thomson.Opensource@...semi.com>,
Lee Jones <lee.jones@...aro.org>,
Samuel Ortiz <sameo@...ux.intel.com>,
Hartmut Knaack <knaack.h@....de>,
"linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
Sebastian Reichel <sre@...nel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
"David Woodhouse" <dwmw2@...radead.org>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
"Grant Likely" <grant.likely@...aro.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Andrew Morton <akpm@...ux-foundation.org>,
"Joe Perches" <joe@...ches.com>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Support Opensource" <Support.Opensource@...semi.com>
Subject: RE: [PATCH v5 3/7] iio: Add support for DA9150 GPADC
On January 4, 2015 17:22, Jonathan Cameron wrote:
> On 22/12/14 16:51, Adam Thomson wrote:
> > This patch adds support for DA9150 Charger & Fuel-Gauge IC GPADC.
> >
> > Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@...semi.com>
> One last query from me.
>
> Using the extended channel names in IIO is only really appropriate when
> they don't correspond to simple pins on the side of the chip. For those
> just drop the extname bit. Some of the channels you have here, definitely
> need them though.
>
> Drop those first 4 or convince me otherwise and add
> Acked-by: Jonathan Cameron <jic23@...nel.org>
Have added responses below. If the comments are accepted then I'll respin
and add you're 'Acked-by'. Is that ok?
> > ---
> > drivers/iio/adc/Kconfig | 9 +
> > drivers/iio/adc/Makefile | 1 +
> > drivers/iio/adc/da9150-gpadc.c | 409
> +++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 419 insertions(+)
> > create mode 100644 drivers/iio/adc/da9150-gpadc.c
> >
> > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> > index 0f79e47..6e00b81 100644
> > --- a/drivers/iio/adc/Kconfig
> > +++ b/drivers/iio/adc/Kconfig
> > @@ -135,6 +135,15 @@ config AXP288_ADC
> > device. Depending on platform configuration, this general purpose ADC can
> > be used for sampling sensors such as thermal resistors.
> >
> > +config DA9150_GPADC
> > + tristate "Dialog DA9150 GPADC driver support"
> > + depends on MFD_DA9150
> > + help
> > + Say yes here to build support for Dialog DA9150 GPADC.
> > +
> > + This driver can also be built as a module. If chosen, the module name
> > + will be da9150-gpadc.
> > +
> > config EXYNOS_ADC
> > tristate "Exynos ADC driver support"
> > depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF &&
> COMPILE_TEST)
> > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> > index 701fdb7..d56ee9b 100644
> > --- a/drivers/iio/adc/Makefile
> > +++ b/drivers/iio/adc/Makefile
> > @@ -15,6 +15,7 @@ obj-$(CONFIG_AD7887) += ad7887.o
> > obj-$(CONFIG_AD799X) += ad799x.o
> > obj-$(CONFIG_AT91_ADC) += at91_adc.o
> > obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
> > +obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o
> > obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
> > obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
> > obj-$(CONFIG_MAX1027) += max1027.o
> > diff --git a/drivers/iio/adc/da9150-gpadc.c b/drivers/iio/adc/da9150-gpadc.c
> > new file mode 100644
> > index 0000000..3f7bc81
> > --- /dev/null
> > +++ b/drivers/iio/adc/da9150-gpadc.c
> > @@ -0,0 +1,409 @@
> > +/*
> > + * DA9150 GPADC Driver
> > + *
> > + * Copyright (c) 2014 Dialog Semiconductor
> > + *
> > + * Author: Adam Thomson <Adam.Thomson.Opensource@...semi.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms of the GNU General Public License as published by the
> > + * Free Software Foundation; either version 2 of the License, or (at your
> > + * option) any later version.
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/slab.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/mutex.h>
> > +#include <linux/completion.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/iio/machine.h>
> > +#include <linux/iio/driver.h>
> > +#include <linux/mfd/da9150/core.h>
> > +#include <linux/mfd/da9150/registers.h>
> > +
> > +/* Channels */
> > +enum da9150_gpadc_hw_channel {
> > + DA9150_GPADC_HW_CHAN_GPIOA_2V = 0,
> > + DA9150_GPADC_HW_CHAN_GPIOA_2V_,
> > + DA9150_GPADC_HW_CHAN_GPIOB_2V,
> > + DA9150_GPADC_HW_CHAN_GPIOB_2V_,
> > + DA9150_GPADC_HW_CHAN_GPIOC_2V,
> > + DA9150_GPADC_HW_CHAN_GPIOC_2V_,
> > + DA9150_GPADC_HW_CHAN_GPIOD_2V,
> > + DA9150_GPADC_HW_CHAN_GPIOD_2V_,
> > + DA9150_GPADC_HW_CHAN_IBUS_SENSE,
> > + DA9150_GPADC_HW_CHAN_IBUS_SENSE_,
> > + DA9150_GPADC_HW_CHAN_VBUS_DIV,
> > + DA9150_GPADC_HW_CHAN_VBUS_DIV_,
> > + DA9150_GPADC_HW_CHAN_ID,
> > + DA9150_GPADC_HW_CHAN_ID_,
> > + DA9150_GPADC_HW_CHAN_VSYS,
> > + DA9150_GPADC_HW_CHAN_VSYS_,
> > + DA9150_GPADC_HW_CHAN_GPIOA_6V,
> > + DA9150_GPADC_HW_CHAN_GPIOA_6V_,
> > + DA9150_GPADC_HW_CHAN_GPIOB_6V,
> > + DA9150_GPADC_HW_CHAN_GPIOB_6V_,
> > + DA9150_GPADC_HW_CHAN_GPIOC_6V,
> > + DA9150_GPADC_HW_CHAN_GPIOC_6V_,
> > + DA9150_GPADC_HW_CHAN_GPIOD_6V,
> > + DA9150_GPADC_HW_CHAN_GPIOD_6V_,
> > + DA9150_GPADC_HW_CHAN_VBAT,
> > + DA9150_GPADC_HW_CHAN_VBAT_,
> > + DA9150_GPADC_HW_CHAN_TBAT,
> > + DA9150_GPADC_HW_CHAN_TBAT_,
> > + DA9150_GPADC_HW_CHAN_TJUNC_CORE,
> > + DA9150_GPADC_HW_CHAN_TJUNC_CORE_,
> > + DA9150_GPADC_HW_CHAN_TJUNC_OVP,
> > + DA9150_GPADC_HW_CHAN_TJUNC_OVP_,
> > +};
> > +
> > +enum da9150_gpadc_channel {
> > + DA9150_GPADC_CHAN_GPIOA = 0,
> > + DA9150_GPADC_CHAN_GPIOB,
> > + DA9150_GPADC_CHAN_GPIOC,
> > + DA9150_GPADC_CHAN_GPIOD,
> > + DA9150_GPADC_CHAN_IBUS,
> > + DA9150_GPADC_CHAN_VBUS,
> > + DA9150_GPADC_CHAN_ID,
> > + DA9150_GPADC_CHAN_VSYS,
> > + DA9150_GPADC_CHAN_VBAT,
> > + DA9150_GPADC_CHAN_TBAT,
> > + DA9150_GPADC_CHAN_TJUNC_CORE,
> > + DA9150_GPADC_CHAN_TJUNC_OVP,
> > +};
> > +
> > +/* Private data */
> > +struct da9150_gpadc {
> > + struct da9150 *da9150;
> > + struct device *dev;
> > +
> > + struct mutex lock;
> > + struct completion complete;
> > +};
> > +
> > +
> > +static irqreturn_t da9150_gpadc_irq(int irq, void *data)
> > +{
> > +
> > + struct da9150_gpadc *gpadc = data;
> > +
> > + complete(&gpadc->complete);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int da9150_gpadc_read_adc(struct da9150_gpadc *gpadc, int hw_chan)
> > +{
> > + u8 result_regs[2];
> > + int result;
> > +
> > + mutex_lock(&gpadc->lock);
> > +
> > + /* Set channel & enable measurement */
> > + da9150_reg_write(gpadc->da9150, DA9150_GPADC_MAN,
> > + (DA9150_GPADC_EN_MASK |
> > + hw_chan << DA9150_GPADC_MUX_SHIFT));
> > +
> > + /* Consume left-over completion from a previous timeout */
> > + try_wait_for_completion(&gpadc->complete);
> > +
> > + /* Check for actual completion */
> > + wait_for_completion_timeout(&gpadc->complete, msecs_to_jiffies(5));
> > +
> > + /* Read result and status from device */
> > + da9150_bulk_read(gpadc->da9150, DA9150_GPADC_RES_A, 2, result_regs);
> > +
> > + mutex_unlock(&gpadc->lock);
> > +
> > + /* Check to make sure device really has completed reading */
> > + if (result_regs[1] & DA9150_GPADC_RUN_MASK) {
> > + dev_err(gpadc->dev, "Timeout on channel %d of GPADC\n",
> > + hw_chan);
> > + return -ETIMEDOUT;
> > + }
> > +
> > + /* LSBs - 2 bits */
> > + result = (result_regs[1] & DA9150_GPADC_RES_L_MASK) >>
> > + DA9150_GPADC_RES_L_SHIFT;
> > + /* MSBs - 8 bits */
> > + result |= result_regs[0] << DA9150_GPADC_RES_L_BITS;
> > +
> > + return result;
> > +}
> > +
> > +static inline int da9150_gpadc_gpio_6v_voltage_now(int raw_val)
> > +{
> > + /* Convert to mV */
> > + return (6 * ((raw_val * 1000) + 500)) / 1024;
> > +}
> > +
> > +static inline int da9150_gpadc_ibus_current_avg(int raw_val)
> > +{
> > + /* Convert to mA */
> > + return (4 * ((raw_val * 1000) + 500)) / 2048;
> > +}
> > +
> > +static inline int da9150_gpadc_vbus_21v_voltage_now(int raw_val)
> > +{
> > + /* Convert to mV */
> > + return (21 * ((raw_val * 1000) + 500)) / 1024;
> > +}
> > +
> > +static inline int da9150_gpadc_vsys_6v_voltage_now(int raw_val)
> > +{
> > + /* Convert to mV */
> > + return (3 * ((raw_val * 1000) + 500)) / 512;
> > +}
> > +
> > +static int da9150_gpadc_read_processed(struct da9150_gpadc *gpadc, int
> channel,
> > + int hw_chan, int *val)
> > +{
> > + int raw_val;
> > +
> > + raw_val = da9150_gpadc_read_adc(gpadc, hw_chan);
> > + if (raw_val < 0)
> > + return raw_val;
> > +
> > + switch (channel) {
> > + case DA9150_GPADC_CHAN_GPIOA:
> > + case DA9150_GPADC_CHAN_GPIOB:
> > + case DA9150_GPADC_CHAN_GPIOC:
> > + case DA9150_GPADC_CHAN_GPIOD:
> > + *val = da9150_gpadc_gpio_6v_voltage_now(raw_val);
> > + break;
> > + case DA9150_GPADC_CHAN_IBUS:
> > + *val = da9150_gpadc_ibus_current_avg(raw_val);
> > + break;
> > + case DA9150_GPADC_CHAN_VBUS:
> > + *val = da9150_gpadc_vbus_21v_voltage_now(raw_val);
> > + break;
> > + case DA9150_GPADC_CHAN_VSYS:
> > + *val = da9150_gpadc_vsys_6v_voltage_now(raw_val);
> > + break;
> > + default:
> > + /* No processing for other channels so return raw value */
> > + *val = raw_val;
> > + break;
> > + }
> > +
> > + return IIO_VAL_INT;
> > +}
> > +
> > +static int da9150_gpadc_read_scale(int channel, int *val, int *val2)
> > +{
> > + switch (channel) {
> > + case DA9150_GPADC_CHAN_VBAT:
> > + *val = 2932;
> > + *val2 = 1000;
> > + return IIO_VAL_FRACTIONAL;
> > + case DA9150_GPADC_CHAN_TJUNC_CORE:
> > + case DA9150_GPADC_CHAN_TJUNC_OVP:
> > + *val = 1000000;
> > + *val2 = 4420;
> > + return IIO_VAL_FRACTIONAL;
> > + default:
> > + return -EINVAL;
> > + }
> > +}
> > +
> > +static int da9150_gpadc_read_offset(int channel, int *val)
> > +{
> > + switch (channel) {
> > + case DA9150_GPADC_CHAN_VBAT:
> > + *val = 1500000 / 2932;
> > + return IIO_VAL_INT;
> > + case DA9150_GPADC_CHAN_TJUNC_CORE:
> > + case DA9150_GPADC_CHAN_TJUNC_OVP:
> > + *val = -144;
> > + return IIO_VAL_INT;
> > + default:
> > + return -EINVAL;
> > + }
> > +}
> > +
> > +static int da9150_gpadc_read_raw(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan,
> > + int *val, int *val2, long mask)
> > +{
> > + struct da9150_gpadc *gpadc = iio_priv(indio_dev);
> > +
> > + if ((chan->channel < DA9150_GPADC_CHAN_GPIOA) ||
> > + (chan->channel > DA9150_GPADC_CHAN_TJUNC_OVP))
> > + return -EINVAL;
> > +
> > + switch (mask) {
> > + case IIO_CHAN_INFO_RAW:
> > + case IIO_CHAN_INFO_PROCESSED:
> > + return da9150_gpadc_read_processed(gpadc, chan->channel,
> > + chan->address, val);
> > + case IIO_CHAN_INFO_SCALE:
> > + return da9150_gpadc_read_scale(chan->channel, val, val2);
> > + case IIO_CHAN_INFO_OFFSET:
> > + return da9150_gpadc_read_offset(chan->channel, val);
> > + default:
> > + return -EINVAL;
> > + }
> > +}
> > +
> > +static const struct iio_info da9150_gpadc_info = {
> > + .read_raw = &da9150_gpadc_read_raw,
> > + .driver_module = THIS_MODULE,
> > +};
> > +
> > +#define DA9150_GPADC_CHANNEL(_id, _hw_id, _type, chan_info, \
> > + _ext_name) { \
> > + .type = _type, \
> > + .indexed = 1, \
> > + .channel = DA9150_GPADC_CHAN_##_id, \
> > + .address = DA9150_GPADC_HW_CHAN_##_hw_id, \
> > + .info_mask_separate = chan_info, \
> > + .extend_name = _ext_name, \
> > + .datasheet_name = #_id, \
> > +}
> > +
> > +#define DA9150_GPADC_CHANNEL_RAW(_id, _hw_id, _type, _ext_name) \
> > + DA9150_GPADC_CHANNEL(_id, _hw_id, _type, \
> > + BIT(IIO_CHAN_INFO_RAW), _ext_name)
> > +
> > +#define DA9150_GPADC_CHANNEL_SCALED(_id, _hw_id, _type, _ext_name) \
> > + DA9150_GPADC_CHANNEL(_id, _hw_id, _type, \
> > + BIT(IIO_CHAN_INFO_RAW) | \
> > + BIT(IIO_CHAN_INFO_SCALE) | \
> > + BIT(IIO_CHAN_INFO_OFFSET), \
> > + _ext_name)
> > +
> > +#define DA9150_GPADC_CHANNEL_PROCESSED(_id, _hw_id, _type, _ext_name)
> \
> > + DA9150_GPADC_CHANNEL(_id, _hw_id, _type, \
> > + BIT(IIO_CHAN_INFO_PROCESSED), _ext_name)
> > +
> > +/* Supported channels */
> > +static const struct iio_chan_spec da9150_gpadc_channels[] = {
> > + DA9150_GPADC_CHANNEL_PROCESSED(GPIOA, GPIOA_6V, IIO_VOLTAGE,
> "GPIOA"),
> > + DA9150_GPADC_CHANNEL_PROCESSED(GPIOB, GPIOB_6V, IIO_VOLTAGE,
> "GPIOB"),
> > + DA9150_GPADC_CHANNEL_PROCESSED(GPIOC, GPIOC_6V, IIO_VOLTAGE,
> "GPIOC"),
> > + DA9150_GPADC_CHANNEL_PROCESSED(GPIOD, GPIOD_6V, IIO_VOLTAGE,
> "GPIOD"),
> I'm not sure some of these really deserve extended names. Those are usually
> reserved for naming strange internal adc channels etc. These first 4 are
> presumably just for input pins? Those should just be channels 0..3
> On another note, unless you want really weird sysfs attribute names, the
> extended names want to be lowercase.
>
I'd prefer to keep the names because the input pins are muxed with GPIOs of the
chip, so thought it sensible to show that this is the case. Am happy to change
to lower-case to follow convention.
> > + DA9150_GPADC_CHANNEL_PROCESSED(IBUS, IBUS_SENSE, IIO_CURRENT,
> "IBUS"),
> > + DA9150_GPADC_CHANNEL_PROCESSED(VBUS, VBUS_DIV_, IIO_VOLTAGE,
> "VBUS"),
> > + DA9150_GPADC_CHANNEL_RAW(ID, ID, IIO_VOLTAGE, "ID"),
> You hae an identifier voltage? That's certainly unusual but if so - fair enough
> and it defintely needs the extname!
Thanks for pointing that out. Having checked again, this is not needed and can
be dispensed with.
> > + DA9150_GPADC_CHANNEL_PROCESSED(VSYS, VSYS, IIO_VOLTAGE, "VSYS"),
> > + DA9150_GPADC_CHANNEL_SCALED(VBAT, VBAT, IIO_VOLTAGE, "VBAT"),
> > + DA9150_GPADC_CHANNEL_RAW(TBAT, TBAT, IIO_VOLTAGE, "TBAT"),
> > + DA9150_GPADC_CHANNEL_SCALED(TJUNC_CORE, TJUNC_CORE,
> IIO_TEMP,
> > + "TJUNC_CORE"),
> tjunc_core is a good use of extname ;)
> > + DA9150_GPADC_CHANNEL_SCALED(TJUNC_OVP, TJUNC_OVP, IIO_TEMP,
> > + "TJUNC_OVP"),
> > +};
> > +
> > +/* Default maps used by da9150-charger */
> > +static struct iio_map da9150_gpadc_default_maps[] = {
> > + {
> > + .consumer_dev_name = "da9150-charger",
> > + .consumer_channel = "CHAN_IBUS",
> > + .adc_channel_label = "IBUS",
> > + },
> > + {
> > + .consumer_dev_name = "da9150-charger",
> > + .consumer_channel = "CHAN_VBUS",
> > + .adc_channel_label = "VBUS",
> > + },
> > + {
> > + .consumer_dev_name = "da9150-charger",
> > + .consumer_channel = "CHAN_TJUNC",
> > + .adc_channel_label = "TJUNC_CORE",
> > + },
> > + {
> > + .consumer_dev_name = "da9150-charger",
> > + .consumer_channel = "CHAN_VBAT",
> > + .adc_channel_label = "VBAT",
> > + },
> > + {},
> > +};
> > +
> > +static int da9150_gpadc_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct da9150 *da9150 = dev_get_drvdata(dev->parent);
> > + struct da9150_gpadc *gpadc;
> > + struct iio_dev *indio_dev;
> > + int irq, ret;
> > +
> > + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*gpadc));
> > + if (!indio_dev) {
> > + dev_err(&pdev->dev, "Failed to allocate IIO device\n");
> > + return -ENOMEM;
> > + }
> > + gpadc = iio_priv(indio_dev);
> > +
> > + platform_set_drvdata(pdev, indio_dev);
> > + gpadc->da9150 = da9150;
> > + gpadc->dev = dev;
> > + mutex_init(&gpadc->lock);
> > + init_completion(&gpadc->complete);
> > +
> > + irq = platform_get_irq_byname(pdev, "GPADC");
> > + if (irq < 0) {
> > + dev_err(dev, "Failed to get IRQ: %d\n", irq);
> > + return irq;
> > + }
> > +
> > + ret = devm_request_threaded_irq(dev, irq, NULL, da9150_gpadc_irq,
> > + IRQF_ONESHOT, "GPADC", gpadc);
> > + if (ret) {
> > + dev_err(dev, "Failed to request IRQ %d: %d\n", irq, ret);
> > + return ret;
> > + }
> > +
> > + ret = iio_map_array_register(indio_dev, da9150_gpadc_default_maps);
> > + if (ret) {
> > + dev_err(dev, "Failed to register IIO maps: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + indio_dev->name = dev_name(dev);
> > + indio_dev->dev.parent = dev;
> > + indio_dev->dev.of_node = pdev->dev.of_node;
> > + indio_dev->info = &da9150_gpadc_info;
> > + indio_dev->modes = INDIO_DIRECT_MODE;
> > + indio_dev->channels = da9150_gpadc_channels;
> > + indio_dev->num_channels = ARRAY_SIZE(da9150_gpadc_channels);
> > +
> > + ret = iio_device_register(indio_dev);
> > + if (ret) {
> > + dev_err(dev, "Failed to register IIO device: %d\n", ret);
> > + goto iio_map_unreg;
> > + }
> > +
> > + return 0;
> > +
> > +iio_map_unreg:
> > + iio_map_array_unregister(indio_dev);
> > +
> > + return ret;
> > +}
> > +
> > +static int da9150_gpadc_remove(struct platform_device *pdev)
> > +{
> > + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> > +
> > + iio_device_unregister(indio_dev);
> > + iio_map_array_unregister(indio_dev);
> > +
> > + return 0;
> > +}
> > +
> > +static struct platform_driver da9150_gpadc_driver = {
> > + .driver = {
> > + .name = "da9150-gpadc",
> > + },
> > + .probe = da9150_gpadc_probe,
> > + .remove = da9150_gpadc_remove,
> > +};
> > +
> > +module_platform_driver(da9150_gpadc_driver);
> > +
> > +MODULE_DESCRIPTION("GPADC Driver for DA9150");
> > +MODULE_AUTHOR("Adam Thomson
> <Adam.Thomson.Opensource@...semi.com>");
> > +MODULE_LICENSE("GPL");
> > --
> > 1.9.3
> >
Powered by blists - more mailing lists