[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <87F60714EC601C4C83DFF1D2E3D390A04AB425@NTXXIAMBX02.xacn.micron.com>
Date: Thu, 8 Jan 2015 00:52:26 +0000
From: Peter Pan 潘栋 (peterpandong)
<peterpandong@...ron.com>
To: "robh+dt@...nel.org" <robh+dt@...nel.org>,
"pawel.moll@....com" <pawel.moll@....com>,
"mark.rutland@....com" <mark.rutland@....com>,
"ijc+devicetree@...lion.org.uk" <ijc+devicetree@...lion.org.uk>,
"galak@...eaurora.org" <galak@...eaurora.org>,
"dwmw2@...radead.org" <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
"Ezequiel Garcia" <ezequiel.garcia@...tec.com>
CC: "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Qi Wang 王起 (qiwang) <qiwang@...ron.com>,
Frank Liu 刘群 (frankliu)
<frankliu@...ron.com>,
Melanie Zhang 张燕 (melaniezhang)
<melaniezhang@...ron.com>,
Peter Pan 潘栋 (peterpandong)
<peterpandong@...ron.com>
Subject: [PATCH 3/3] mtd: spi-nand: add devicetree binding
This commit adds the devicetree binding document that specifies the
spi nand devices support.
Signed-off-by: Peter Pan <peterpandong@...ron.com>
---
Documentation/devicetree/bindings/mtd/spi-nand.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.txt
diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.txt b/Documentation/devicetree/bindings/mtd/spi-nand.txt
new file mode 100644
index 0000000..9dd3efd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/spi-nand.txt
@@ -0,0 +1,22 @@
+* NAND driver for MT29F, GD5F and similar SPI NAND flash chips
+
+Required properties:
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+ representing partitions.
+- compatible : Should be the manufacturer and the name of the chip. Bear in mind
+ the DT binding is not Linux-only, but in case of Linux, see the
+ "spi_nand_id_table" array in drivers/mtd/spi-nand/spi-nand-device.c
+ for the list of supported chips.
+- reg : Chip-Select number
+- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
+
+Example:
+
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,mt29f";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+
--
1.9.1
Powered by blists - more mailing lists