| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150111203612.GA8999@linux>
Date: Sun, 11 Jan 2015 15:36:12 -0500
From: "Ahmed S. Darwish" <darwish.07@...il.com>
To: Olivier Sobrie <olivier@...rie.be>,
Oliver Hartkopp <socketcan@...tkopp.net>,
Wolfgang Grandegger <wg@...ndegger.com>,
Marc Kleine-Budde <mkl@...gutronix.de>
Cc: "David S. Miller" <davem@...emloft.net>,
Paul Gortmaker <paul.gortmaker@...driver.com>,
Linux-CAN <linux-can@...r.kernel.org>,
netdev <netdev@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family
From: Ahmed S. Darwish <ahmed.darwish@...eo.com>
CAN to USB interfaces sold by the Swedish manufacturer Kvaser are
divided into two major families: 'Leaf', and 'UsbcanII'. From an
Operating System perspective, the firmware of both families behave
in a not too drastically different fashion.
This patch adds support for the UsbcanII family of devices to the
current Kvaser Leaf-only driver.
CAN frames sending, receiving, and error handling paths has been
tested using the dual-channel "Kvaser USBcan II HS/LS" dongle. It
should also work nicely with other products in the same category.
List of new devices supported by this driver update:
- Kvaser USBcan II HS/HS
- Kvaser USBcan II HS/LS
- Kvaser USBcan Rugged ("USBcan Rev B")
- Kvaser Memorator HS/HS
- Kvaser Memorator HS/LS
- Scania VCI2 (if you have the Kvaser logo on top)
Signed-off-by: Ahmed S. Darwish <ahmed.darwish@...eo.com>
---
drivers/net/can/usb/Kconfig | 8 +-
drivers/net/can/usb/kvaser_usb.c | 612 ++++++++++++++++++++++++++++++---------
2 files changed, 487 insertions(+), 133 deletions(-)
** V4 Changelog:
- Use type-safe C methods instead of cpp macros
- Further clarify the code and comments on error events channel arbitration
- Remove defensive checks against non-existing families
- Re-order methods to remove forward declarations
- Smaller stuff spotted by earlier review (function prefexes, etc.)
** V3 Changelog:
- Fix padding for the usbcan_msg_tx_acknowledge command
- Remove kvaser_usb->max_channels and the MAX_NET_DEVICES macro
- Rename commands to CMD_LEAF_xxx and CMD_USBCAN_xxx
- Apply checkpatch.pl suggestions ('net/' comments, multi-line strings, etc.)
** V2 Changelog:
- Update Kconfig entries
- Use actual number of CAN channels (instead of max) where appropriate
- Rebase over a new set of UsbcanII-independent driver fixes
diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
index a77db919..f6f5500 100644
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
@@ -25,7 +25,7 @@ config CAN_KVASER_USB
tristate "Kvaser CAN/USB interface"
---help---
This driver adds support for Kvaser CAN/USB devices like Kvaser
- Leaf Light.
+ Leaf Light and Kvaser USBcan II.
The driver provides support for the following devices:
- Kvaser Leaf Light
@@ -46,6 +46,12 @@ config CAN_KVASER_USB
- Kvaser USBcan R
- Kvaser Leaf Light v2
- Kvaser Mini PCI Express HS
+ - Kvaser USBcan II HS/HS
+ - Kvaser USBcan II HS/LS
+ - Kvaser USBcan Rugged ("USBcan Rev B")
+ - Kvaser Memorator HS/HS
+ - Kvaser Memorator HS/LS
+ - Scania VCI2 (if you have the Kvaser logo on top)
If unsure, say N.
diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
index 0eb870b..da47d17 100644
--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c
@@ -6,10 +6,12 @@
* Parts of this driver are based on the following:
* - Kvaser linux leaf driver (version 4.78)
* - CAN driver for esd CAN-USB/2
+ * - Kvaser linux usbcanII driver (version 5.3)
*
* Copyright (C) 2002-2006 KVASER AB, Sweden. All rights reserved.
* Copyright (C) 2010 Matthias Fuchs <matthias.fuchs@....eu>, esd gmbh
* Copyright (C) 2012 Olivier Sobrie <olivier@...rie.be>
+ * Copyright (C) 2015 Valeo Corporation
*/
#include <linux/completion.h>
@@ -21,6 +23,15 @@
#include <linux/can/dev.h>
#include <linux/can/error.h>
+/* Kvaser USB CAN dongles are divided into two major families:
+ * - Leaf: Based on Renesas M32C, running firmware labeled as 'filo'
+ * - UsbcanII: Based on Renesas M16C, running firmware labeled as 'helios'
+ */
+enum kvaser_usb_family {
+ KVASER_LEAF,
+ KVASER_USBCAN,
+};
+
#define MAX_TX_URBS 16
#define MAX_RX_URBS 4
#define START_TIMEOUT 1000 /* msecs */
@@ -30,8 +41,9 @@
#define RX_BUFFER_SIZE 3072
#define CAN_USB_CLOCK 8000000
#define MAX_NET_DEVICES 3
+#define MAX_USBCAN_NET_DEVICES 2
-/* Kvaser USB devices */
+/* Leaf USB devices */
#define KVASER_VENDOR_ID 0x0bfd
#define USB_LEAF_DEVEL_PRODUCT_ID 10
#define USB_LEAF_LITE_PRODUCT_ID 11
@@ -56,6 +68,24 @@
#define USB_LEAF_LITE_V2_PRODUCT_ID 288
#define USB_MINI_PCIE_HS_PRODUCT_ID 289
+static inline bool kvaser_is_leaf(const struct usb_device_id *id)
+{
+ return id->idProduct >= USB_LEAF_DEVEL_PRODUCT_ID &&
+ id->idProduct <= USB_MINI_PCIE_HS_PRODUCT_ID;
+}
+
+/* USBCANII devices */
+#define USB_USBCAN_REVB_PRODUCT_ID 2
+#define USB_VCI2_PRODUCT_ID 3
+#define USB_USBCAN2_PRODUCT_ID 4
+#define USB_MEMORATOR_PRODUCT_ID 5
+
+static inline bool kvaser_is_usbcan(const struct usb_device_id *id)
+{
+ return id->idProduct >= USB_USBCAN_REVB_PRODUCT_ID &&
+ id->idProduct <= USB_MEMORATOR_PRODUCT_ID;
+}
+
/* USB devices features */
#define KVASER_HAS_SILENT_MODE BIT(0)
#define KVASER_HAS_TXRX_ERRORS BIT(1)
@@ -73,7 +103,7 @@
#define MSG_FLAG_TX_ACK BIT(6)
#define MSG_FLAG_TX_REQUEST BIT(7)
-/* Can states */
+/* Can states (M16C CxSTRH register) */
#define M16C_STATE_BUS_RESET BIT(0)
#define M16C_STATE_BUS_ERROR BIT(4)
#define M16C_STATE_BUS_PASSIVE BIT(5)
@@ -98,7 +128,13 @@
#define CMD_START_CHIP_REPLY 27
#define CMD_STOP_CHIP 28
#define CMD_STOP_CHIP_REPLY 29
-#define CMD_GET_CARD_INFO2 32
+#define CMD_READ_CLOCK 30
+#define CMD_READ_CLOCK_REPLY 31
+
+#define CMD_LEAF_GET_CARD_INFO2 32
+#define CMD_USBCAN_RESET_CLOCK 32
+#define CMD_USBCAN_CLOCK_OVERFLOW_EVENT 33
+
#define CMD_GET_CARD_INFO 34
#define CMD_GET_CARD_INFO_REPLY 35
#define CMD_GET_SOFTWARE_INFO 38
@@ -108,8 +144,9 @@
#define CMD_RESET_ERROR_COUNTER 49
#define CMD_TX_ACKNOWLEDGE 50
#define CMD_CAN_ERROR_EVENT 51
-#define CMD_USB_THROTTLE 77
-#define CMD_LOG_MESSAGE 106
+
+#define CMD_LEAF_USB_THROTTLE 77
+#define CMD_LEAF_LOG_MESSAGE 106
/* error factors */
#define M16C_EF_ACKE BIT(0)
@@ -121,6 +158,14 @@
#define M16C_EF_RCVE BIT(6)
#define M16C_EF_TRE BIT(7)
+/* Only Leaf-based devices can report M16C error factors,
+ * thus define our own error status flags for USBCANII
+ */
+#define USBCAN_ERROR_STATE_NONE 0
+#define USBCAN_ERROR_STATE_TX_ERROR BIT(0)
+#define USBCAN_ERROR_STATE_RX_ERROR BIT(1)
+#define USBCAN_ERROR_STATE_BUSERROR BIT(2)
+
/* bittiming parameters */
#define KVASER_USB_TSEG1_MIN 1
#define KVASER_USB_TSEG1_MAX 16
@@ -137,7 +182,7 @@
#define KVASER_CTRL_MODE_SELFRECEPTION 3
#define KVASER_CTRL_MODE_OFF 4
-/* log message */
+/* Extended CAN identifier flag */
#define KVASER_EXTENDED_FRAME BIT(31)
struct kvaser_msg_simple {
@@ -148,30 +193,55 @@ struct kvaser_msg_simple {
struct kvaser_msg_cardinfo {
u8 tid;
u8 nchannels;
- __le32 serial_number;
- __le32 padding;
+ union {
+ struct {
+ __le32 serial_number;
+ __le32 padding;
+ } __packed leaf0;
+ struct {
+ __le32 serial_number_low;
+ __le32 serial_number_high;
+ } __packed usbcan0;
+ } __packed;
__le32 clock_resolution;
__le32 mfgdate;
u8 ean[8];
u8 hw_revision;
- u8 usb_hs_mode;
- __le16 padding2;
+ union {
+ struct {
+ u8 usb_hs_mode;
+ } __packed leaf1;
+ struct {
+ u8 padding;
+ } __packed usbcan1;
+ } __packed;
+ __le16 padding;
} __packed;
struct kvaser_msg_cardinfo2 {
u8 tid;
- u8 channel;
+ u8 reserved;
u8 pcb_id[24];
__le32 oem_unlock_code;
} __packed;
-struct kvaser_msg_softinfo {
+struct leaf_msg_softinfo {
u8 tid;
- u8 channel;
+ u8 padding0;
__le32 sw_options;
__le32 fw_version;
__le16 max_outstanding_tx;
- __le16 padding[9];
+ __le16 padding1[9];
+} __packed;
+
+struct usbcan_msg_softinfo {
+ u8 tid;
+ u8 fw_name[5];
+ __le16 max_outstanding_tx;
+ u8 padding[6];
+ __le32 fw_version;
+ __le16 checksum;
+ __le16 sw_options;
} __packed;
struct kvaser_msg_busparams {
@@ -188,36 +258,86 @@ struct kvaser_msg_tx_can {
u8 channel;
u8 tid;
u8 msg[14];
- u8 padding;
- u8 flags;
+ union {
+ struct {
+ u8 padding;
+ u8 flags;
+ } __packed leaf;
+ struct {
+ u8 flags;
+ u8 padding;
+ } __packed usbcan;
+ } __packed;
+} __packed;
+
+struct kvaser_msg_rx_can_header {
+ u8 channel;
+ u8 flag;
} __packed;
-struct kvaser_msg_rx_can {
+struct leaf_msg_rx_can {
u8 channel;
u8 flag;
+
__le16 time[3];
u8 msg[14];
} __packed;
-struct kvaser_msg_chip_state_event {
+struct usbcan_msg_rx_can {
+ u8 channel;
+ u8 flag;
+
+ u8 msg[14];
+ __le16 time;
+} __packed;
+
+struct leaf_msg_chip_state_event {
u8 tid;
u8 channel;
+
__le16 time[3];
u8 tx_errors_count;
u8 rx_errors_count;
+
u8 status;
u8 padding[3];
} __packed;
-struct kvaser_msg_tx_acknowledge {
+struct usbcan_msg_chip_state_event {
+ u8 tid;
+ u8 channel;
+
+ u8 tx_errors_count;
+ u8 rx_errors_count;
+ __le16 time;
+
+ u8 status;
+ u8 padding[3];
+} __packed;
+
+struct kvaser_msg_tx_acknowledge_header {
+ u8 channel;
+ u8 tid;
+};
+
+struct leaf_msg_tx_acknowledge {
u8 channel;
u8 tid;
+
__le16 time[3];
u8 flags;
u8 time_offset;
} __packed;
-struct kvaser_msg_error_event {
+struct usbcan_msg_tx_acknowledge {
+ u8 channel;
+ u8 tid;
+
+ __le16 time;
+ __le16 padding;
+} __packed;
+
+struct leaf_msg_error_event {
u8 tid;
u8 flags;
__le16 time[3];
@@ -229,6 +349,18 @@ struct kvaser_msg_error_event {
u8 error_factor;
} __packed;
+struct usbcan_msg_error_event {
+ u8 tid;
+ u8 padding;
+ u8 tx_errors_count_ch0;
+ u8 rx_errors_count_ch0;
+ u8 tx_errors_count_ch1;
+ u8 rx_errors_count_ch1;
+ u8 status_ch0;
+ u8 status_ch1;
+ __le16 time;
+} __packed;
+
struct kvaser_msg_ctrl_mode {
u8 tid;
u8 channel;
@@ -243,7 +375,7 @@ struct kvaser_msg_flush_queue {
u8 padding[3];
} __packed;
-struct kvaser_msg_log_message {
+struct leaf_msg_log_message {
u8 channel;
u8 flags;
__le16 time[3];
@@ -260,19 +392,57 @@ struct kvaser_msg {
struct kvaser_msg_simple simple;
struct kvaser_msg_cardinfo cardinfo;
struct kvaser_msg_cardinfo2 cardinfo2;
- struct kvaser_msg_softinfo softinfo;
struct kvaser_msg_busparams busparams;
+
+ struct kvaser_msg_rx_can_header rx_can_header;
+ struct kvaser_msg_tx_acknowledge_header tx_acknowledge_header;
+
+ union {
+ struct leaf_msg_softinfo softinfo;
+ struct leaf_msg_rx_can rx_can;
+ struct leaf_msg_chip_state_event chip_state_event;
+ struct leaf_msg_tx_acknowledge tx_acknowledge;
+ struct leaf_msg_error_event error_event;
+ struct leaf_msg_log_message log_message;
+ } __packed leaf;
+
+ union {
+ struct usbcan_msg_softinfo softinfo;
+ struct usbcan_msg_rx_can rx_can;
+ struct usbcan_msg_chip_state_event chip_state_event;
+ struct usbcan_msg_tx_acknowledge tx_acknowledge;
+ struct usbcan_msg_error_event error_event;
+ } __packed usbcan;
+
struct kvaser_msg_tx_can tx_can;
- struct kvaser_msg_rx_can rx_can;
- struct kvaser_msg_chip_state_event chip_state_event;
- struct kvaser_msg_tx_acknowledge tx_acknowledge;
- struct kvaser_msg_error_event error_event;
struct kvaser_msg_ctrl_mode ctrl_mode;
struct kvaser_msg_flush_queue flush_queue;
- struct kvaser_msg_log_message log_message;
} u;
} __packed;
+/* Summary of a kvaser error event, for a unified Leaf/Usbcan error
+ * handling. Some discrepancies between the two families exist:
+ *
+ * - USBCAN firmware does not report M16C "error factors"
+ * - USBCAN controllers has difficulties reporting if the raised error
+ * event is for ch0 or ch1. They leave such arbitration to the OS
+ * driver by letting it compare error counters with previous values
+ * and decide the error event's channel. Thus for USBCAN, the channel
+ * field is only advisory.
+ */
+struct kvaser_error_summary {
+ u8 channel, status, txerr, rxerr;
+ union {
+ struct {
+ u8 error_factor;
+ } leaf;
+ struct {
+ u8 other_ch_status;
+ u8 error_state;
+ } usbcan;
+ };
+};
+
struct kvaser_usb_tx_urb_context {
struct kvaser_usb_net_priv *priv;
u32 echo_index;
@@ -288,6 +458,7 @@ struct kvaser_usb {
u32 fw_version;
unsigned int nchannels;
+ enum kvaser_usb_family family;
bool rxinitdone;
void *rxbuf[MAX_RX_URBS];
@@ -311,6 +482,7 @@ struct kvaser_usb_net_priv {
};
static const struct usb_device_id kvaser_usb_table[] = {
+ /* Leaf family IDs */
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_DEVEL_PRODUCT_ID) },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_PRODUCT_ID) },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_PRODUCT_ID),
@@ -360,6 +532,17 @@ static const struct usb_device_id kvaser_usb_table[] = {
.driver_info = KVASER_HAS_TXRX_ERRORS },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_V2_PRODUCT_ID) },
{ USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_HS_PRODUCT_ID) },
+
+ /* USBCANII family IDs */
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN2_PRODUCT_ID),
+ .driver_info = KVASER_HAS_TXRX_ERRORS },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_REVB_PRODUCT_ID),
+ .driver_info = KVASER_HAS_TXRX_ERRORS },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMORATOR_PRODUCT_ID),
+ .driver_info = KVASER_HAS_TXRX_ERRORS },
+ { USB_DEVICE(KVASER_VENDOR_ID, USB_VCI2_PRODUCT_ID),
+ .driver_info = KVASER_HAS_TXRX_ERRORS },
+
{ }
};
MODULE_DEVICE_TABLE(usb, kvaser_usb_table);
@@ -463,7 +646,14 @@ static int kvaser_usb_get_software_info(struct kvaser_usb *dev)
if (err)
return err;
- dev->fw_version = le32_to_cpu(msg.u.softinfo.fw_version);
+ switch (dev->family) {
+ case KVASER_LEAF:
+ dev->fw_version = le32_to_cpu(msg.u.leaf.softinfo.fw_version);
+ break;
+ case KVASER_USBCAN:
+ dev->fw_version = le32_to_cpu(msg.u.usbcan.softinfo.fw_version);
+ break;
+ }
return 0;
}
@@ -482,7 +672,9 @@ static int kvaser_usb_get_card_info(struct kvaser_usb *dev)
return err;
dev->nchannels = msg.u.cardinfo.nchannels;
- if (dev->nchannels > MAX_NET_DEVICES)
+ if ((dev->nchannels > MAX_NET_DEVICES) ||
+ (dev->family == KVASER_USBCAN &&
+ dev->nchannels > MAX_USBCAN_NET_DEVICES))
return -EINVAL;
return 0;
@@ -496,8 +688,10 @@ static void kvaser_usb_tx_acknowledge(const struct kvaser_usb *dev,
struct kvaser_usb_net_priv *priv;
struct sk_buff *skb;
struct can_frame *cf;
- u8 channel = msg->u.tx_acknowledge.channel;
- u8 tid = msg->u.tx_acknowledge.tid;
+ u8 channel, tid;
+
+ channel = msg->u.tx_acknowledge_header.channel;
+ tid = msg->u.tx_acknowledge_header.tid;
if (channel >= dev->nchannels) {
dev_err(dev->udev->dev.parent,
@@ -616,53 +810,24 @@ static void kvaser_usb_unlink_tx_urbs(struct kvaser_usb_net_priv *priv)
}
static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
- const struct kvaser_msg *msg)
+ struct kvaser_error_summary *es)
{
struct can_frame *cf;
struct sk_buff *skb;
struct net_device_stats *stats;
struct kvaser_usb_net_priv *priv;
unsigned int new_state;
- u8 channel, status, txerr, rxerr, error_factor;
-
- switch (msg->id) {
- case CMD_CAN_ERROR_EVENT:
- channel = msg->u.error_event.channel;
- status = msg->u.error_event.status;
- txerr = msg->u.error_event.tx_errors_count;
- rxerr = msg->u.error_event.rx_errors_count;
- error_factor = msg->u.error_event.error_factor;
- break;
- case CMD_LOG_MESSAGE:
- channel = msg->u.log_message.channel;
- status = msg->u.log_message.data[0];
- txerr = msg->u.log_message.data[2];
- rxerr = msg->u.log_message.data[3];
- error_factor = msg->u.log_message.data[1];
- break;
- case CMD_CHIP_STATE_EVENT:
- channel = msg->u.chip_state_event.channel;
- status = msg->u.chip_state_event.status;
- txerr = msg->u.chip_state_event.tx_errors_count;
- rxerr = msg->u.chip_state_event.rx_errors_count;
- error_factor = 0;
- break;
- default:
- dev_err(dev->udev->dev.parent, "Invalid msg id (%d)\n",
- msg->id);
- return;
- }
- if (channel >= dev->nchannels) {
+ if (es->channel >= dev->nchannels) {
dev_err(dev->udev->dev.parent,
- "Invalid channel number (%d)\n", channel);
+ "Invalid channel number (%d)\n", es->channel);
return;
}
- priv = dev->nets[channel];
+ priv = dev->nets[es->channel];
stats = &priv->netdev->stats;
- if (status & M16C_STATE_BUS_RESET) {
+ if (es->status & M16C_STATE_BUS_RESET) {
kvaser_usb_unlink_tx_urbs(priv);
return;
}
@@ -675,9 +840,9 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
new_state = priv->can.state;
- netdev_dbg(priv->netdev, "Error status: 0x%02x\n", status);
+ netdev_dbg(priv->netdev, "Error status: 0x%02x\n", es->status);
- if (status & M16C_STATE_BUS_OFF) {
+ if (es->status & M16C_STATE_BUS_OFF) {
cf->can_id |= CAN_ERR_BUSOFF;
priv->can.can_stats.bus_off++;
@@ -687,12 +852,12 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
netif_carrier_off(priv->netdev);
new_state = CAN_STATE_BUS_OFF;
- } else if (status & M16C_STATE_BUS_PASSIVE) {
+ } else if (es->status & M16C_STATE_BUS_PASSIVE) {
if (priv->can.state != CAN_STATE_ERROR_PASSIVE) {
cf->can_id |= CAN_ERR_CRTL;
- if (txerr || rxerr)
- cf->data[1] = (txerr > rxerr)
+ if (es->txerr || es->rxerr)
+ cf->data[1] = (es->txerr > es->rxerr)
? CAN_ERR_CRTL_TX_PASSIVE
: CAN_ERR_CRTL_RX_PASSIVE;
else
@@ -703,13 +868,11 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
}
new_state = CAN_STATE_ERROR_PASSIVE;
- }
-
- if (status == M16C_STATE_BUS_ERROR) {
+ } else if (es->status & M16C_STATE_BUS_ERROR) {
if ((priv->can.state < CAN_STATE_ERROR_WARNING) &&
- ((txerr >= 96) || (rxerr >= 96))) {
+ ((es->txerr >= 96) || (es->rxerr >= 96))) {
cf->can_id |= CAN_ERR_CRTL;
- cf->data[1] = (txerr > rxerr)
+ cf->data[1] = (es->txerr > es->rxerr)
? CAN_ERR_CRTL_TX_WARNING
: CAN_ERR_CRTL_RX_WARNING;
@@ -723,7 +886,7 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
}
}
- if (!status) {
+ if (!es->status) {
cf->can_id |= CAN_ERR_PROT;
cf->data[2] = CAN_ERR_PROT_ACTIVE;
@@ -739,34 +902,48 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
priv->can.can_stats.restarts++;
}
- if (error_factor) {
- priv->can.can_stats.bus_error++;
- stats->rx_errors++;
-
- cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT;
-
- if (error_factor & M16C_EF_ACKE)
- cf->data[3] |= (CAN_ERR_PROT_LOC_ACK);
- if (error_factor & M16C_EF_CRCE)
- cf->data[3] |= (CAN_ERR_PROT_LOC_CRC_SEQ |
- CAN_ERR_PROT_LOC_CRC_DEL);
- if (error_factor & M16C_EF_FORME)
- cf->data[2] |= CAN_ERR_PROT_FORM;
- if (error_factor & M16C_EF_STFE)
- cf->data[2] |= CAN_ERR_PROT_STUFF;
- if (error_factor & M16C_EF_BITE0)
- cf->data[2] |= CAN_ERR_PROT_BIT0;
- if (error_factor & M16C_EF_BITE1)
- cf->data[2] |= CAN_ERR_PROT_BIT1;
- if (error_factor & M16C_EF_TRE)
- cf->data[2] |= CAN_ERR_PROT_TX;
+ switch (dev->family) {
+ case KVASER_LEAF:
+ if (es->leaf.error_factor) {
+ priv->can.can_stats.bus_error++;
+ stats->rx_errors++;
+
+ cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT;
+
+ if (es->leaf.error_factor & M16C_EF_ACKE)
+ cf->data[3] |= (CAN_ERR_PROT_LOC_ACK);
+ if (es->leaf.error_factor & M16C_EF_CRCE)
+ cf->data[3] |= (CAN_ERR_PROT_LOC_CRC_SEQ |
+ CAN_ERR_PROT_LOC_CRC_DEL);
+ if (es->leaf.error_factor & M16C_EF_FORME)
+ cf->data[2] |= CAN_ERR_PROT_FORM;
+ if (es->leaf.error_factor & M16C_EF_STFE)
+ cf->data[2] |= CAN_ERR_PROT_STUFF;
+ if (es->leaf.error_factor & M16C_EF_BITE0)
+ cf->data[2] |= CAN_ERR_PROT_BIT0;
+ if (es->leaf.error_factor & M16C_EF_BITE1)
+ cf->data[2] |= CAN_ERR_PROT_BIT1;
+ if (es->leaf.error_factor & M16C_EF_TRE)
+ cf->data[2] |= CAN_ERR_PROT_TX;
+ }
+ break;
+ case KVASER_USBCAN:
+ if (es->usbcan.error_state & USBCAN_ERROR_STATE_TX_ERROR)
+ stats->tx_errors++;
+ if (es->usbcan.error_state & USBCAN_ERROR_STATE_RX_ERROR)
+ stats->rx_errors++;
+ if (es->usbcan.error_state & USBCAN_ERROR_STATE_BUSERROR) {
+ priv->can.can_stats.bus_error++;
+ cf->can_id |= CAN_ERR_BUSERROR;
+ }
+ break;
}
- cf->data[6] = txerr;
- cf->data[7] = rxerr;
+ cf->data[6] = es->txerr;
+ cf->data[7] = es->rxerr;
- priv->bec.txerr = txerr;
- priv->bec.rxerr = rxerr;
+ priv->bec.txerr = es->txerr;
+ priv->bec.rxerr = es->rxerr;
priv->can.state = new_state;
@@ -775,6 +952,124 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
netif_rx(skb);
}
+/* For USBCAN, report error to userspace iff the channels's errors counter
+ * has increased, or we're the only channel seeing a bus error state.
+ */
+static void kvaser_usbcan_conditionally_rx_error(const struct kvaser_usb *dev,
+ struct kvaser_error_summary *es)
+{
+ struct kvaser_usb_net_priv *priv;
+ int channel;
+ bool report_error;
+
+ channel = es->channel;
+ if (channel >= dev->nchannels) {
+ dev_err(dev->udev->dev.parent,
+ "Invalid channel number (%d)\n", channel);
+ return;
+ }
+
+ priv = dev->nets[channel];
+ report_error = false;
+
+ if (es->txerr > priv->bec.txerr) {
+ es->usbcan.error_state |= USBCAN_ERROR_STATE_TX_ERROR;
+ report_error = true;
+ }
+ if (es->rxerr > priv->bec.rxerr) {
+ es->usbcan.error_state |= USBCAN_ERROR_STATE_RX_ERROR;
+ report_error = true;
+ }
+ if ((es->status & M16C_STATE_BUS_ERROR) &&
+ !(es->usbcan.other_ch_status & M16C_STATE_BUS_ERROR)) {
+ es->usbcan.error_state |= USBCAN_ERROR_STATE_BUSERROR;
+ report_error = true;
+ }
+
+ if (report_error)
+ kvaser_usb_rx_error(dev, es);
+}
+
+static void kvaser_usbcan_rx_error(const struct kvaser_usb *dev,
+ const struct kvaser_msg *msg)
+{
+ struct kvaser_error_summary es = { };
+
+ switch (msg->id) {
+ /* Sometimes errors are sent as unsolicited chip state events */
+ case CMD_CHIP_STATE_EVENT:
+ es.channel = msg->u.usbcan.chip_state_event.channel;
+ es.status = msg->u.usbcan.chip_state_event.status;
+ es.txerr = msg->u.usbcan.chip_state_event.tx_errors_count;
+ es.rxerr = msg->u.usbcan.chip_state_event.rx_errors_count;
+ kvaser_usbcan_conditionally_rx_error(dev, &es);
+ break;
+
+ case CMD_CAN_ERROR_EVENT:
+ es.channel = 0;
+ es.status = msg->u.usbcan.error_event.status_ch0;
+ es.txerr = msg->u.usbcan.error_event.tx_errors_count_ch0;
+ es.rxerr = msg->u.usbcan.error_event.rx_errors_count_ch0;
+ es.usbcan.other_ch_status =
+ msg->u.usbcan.error_event.status_ch1;
+ kvaser_usbcan_conditionally_rx_error(dev, &es);
+
+ /* The USBCAN firmware does not support more than 2 channels.
+ * Now that ch0 was checked, check if ch1 has any errors.
+ */
+ if (dev->nchannels == MAX_USBCAN_NET_DEVICES) {
+ es.channel = 1;
+ es.status = msg->u.usbcan.error_event.status_ch1;
+ es.txerr = msg->u.usbcan.error_event.tx_errors_count_ch1;
+ es.rxerr = msg->u.usbcan.error_event.rx_errors_count_ch1;
+ es.usbcan.other_ch_status =
+ msg->u.usbcan.error_event.status_ch0;
+ kvaser_usbcan_conditionally_rx_error(dev, &es);
+ }
+ break;
+
+ default:
+ dev_err(dev->udev->dev.parent, "Invalid msg id (%d)\n",
+ msg->id);
+ }
+}
+
+static void kvaser_leaf_rx_error(const struct kvaser_usb *dev,
+ const struct kvaser_msg *msg)
+{
+ struct kvaser_error_summary es = { };
+
+ switch (msg->id) {
+ case CMD_CAN_ERROR_EVENT:
+ es.channel = msg->u.leaf.error_event.channel;
+ es.status = msg->u.leaf.error_event.status;
+ es.txerr = msg->u.leaf.error_event.tx_errors_count;
+ es.rxerr = msg->u.leaf.error_event.rx_errors_count;
+ es.leaf.error_factor = msg->u.leaf.error_event.error_factor;
+ break;
+ case CMD_LEAF_LOG_MESSAGE:
+ es.channel = msg->u.leaf.log_message.channel;
+ es.status = msg->u.leaf.log_message.data[0];
+ es.txerr = msg->u.leaf.log_message.data[2];
+ es.rxerr = msg->u.leaf.log_message.data[3];
+ es.leaf.error_factor = msg->u.leaf.log_message.data[1];
+ break;
+ case CMD_CHIP_STATE_EVENT:
+ es.channel = msg->u.leaf.chip_state_event.channel;
+ es.status = msg->u.leaf.chip_state_event.status;
+ es.txerr = msg->u.leaf.chip_state_event.tx_errors_count;
+ es.rxerr = msg->u.leaf.chip_state_event.rx_errors_count;
+ es.leaf.error_factor = 0;
+ break;
+ default:
+ dev_err(dev->udev->dev.parent, "Invalid msg id (%d)\n",
+ msg->id);
+ return;
+ }
+
+ kvaser_usb_rx_error(dev, &es);
+}
+
static void kvaser_usb_rx_can_err(const struct kvaser_usb_net_priv *priv,
const struct kvaser_msg *msg)
{
@@ -782,16 +1077,16 @@ static void kvaser_usb_rx_can_err(const struct kvaser_usb_net_priv *priv,
struct sk_buff *skb;
struct net_device_stats *stats = &priv->netdev->stats;
- if (msg->u.rx_can.flag & (MSG_FLAG_ERROR_FRAME |
+ if (msg->u.rx_can_header.flag & (MSG_FLAG_ERROR_FRAME |
MSG_FLAG_NERR)) {
netdev_err(priv->netdev, "Unknow error (flags: 0x%02x)\n",
- msg->u.rx_can.flag);
+ msg->u.rx_can_header.flag);
stats->rx_errors++;
return;
}
- if (msg->u.rx_can.flag & MSG_FLAG_OVERRUN) {
+ if (msg->u.rx_can_header.flag & MSG_FLAG_OVERRUN) {
stats->rx_over_errors++;
stats->rx_errors++;
@@ -817,7 +1112,8 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev,
struct can_frame *cf;
struct sk_buff *skb;
struct net_device_stats *stats;
- u8 channel = msg->u.rx_can.channel;
+ u8 channel = msg->u.rx_can_header.channel;
+ const u8 *rx_msg;
if (channel >= dev->nchannels) {
dev_err(dev->udev->dev.parent,
@@ -828,19 +1124,32 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev,
priv = dev->nets[channel];
stats = &priv->netdev->stats;
- if ((msg->u.rx_can.flag & MSG_FLAG_ERROR_FRAME) &&
- (msg->id == CMD_LOG_MESSAGE)) {
- kvaser_usb_rx_error(dev, msg);
+ if ((msg->u.rx_can_header.flag & MSG_FLAG_ERROR_FRAME) &&
+ (dev->family == KVASER_LEAF && msg->id == CMD_LEAF_LOG_MESSAGE)) {
+ kvaser_leaf_rx_error(dev, msg);
return;
- } else if (msg->u.rx_can.flag & (MSG_FLAG_ERROR_FRAME |
- MSG_FLAG_NERR |
- MSG_FLAG_OVERRUN)) {
+ } else if (msg->u.rx_can_header.flag & (MSG_FLAG_ERROR_FRAME |
+ MSG_FLAG_NERR |
+ MSG_FLAG_OVERRUN)) {
kvaser_usb_rx_can_err(priv, msg);
return;
- } else if (msg->u.rx_can.flag & ~MSG_FLAG_REMOTE_FRAME) {
+ } else if (msg->u.rx_can_header.flag & ~MSG_FLAG_REMOTE_FRAME) {
netdev_warn(priv->netdev,
"Unhandled frame (flags: 0x%02x)",
- msg->u.rx_can.flag);
+ msg->u.rx_can_header.flag);
+ return;
+ }
+
+ switch (dev->family) {
+ case KVASER_LEAF:
+ rx_msg = msg->u.leaf.rx_can.msg;
+ break;
+ case KVASER_USBCAN:
+ rx_msg = msg->u.usbcan.rx_can.msg;
+ break;
+ default:
+ dev_err(dev->udev->dev.parent,
+ "Invalid device family (%d)\n", dev->family);
return;
}
@@ -850,38 +1159,37 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev,
return;
}
- if (msg->id == CMD_LOG_MESSAGE) {
- cf->can_id = le32_to_cpu(msg->u.log_message.id);
+ if (dev->family == KVASER_LEAF && msg->id == CMD_LEAF_LOG_MESSAGE) {
+ cf->can_id = le32_to_cpu(msg->u.leaf.log_message.id);
if (cf->can_id & KVASER_EXTENDED_FRAME)
cf->can_id &= CAN_EFF_MASK | CAN_EFF_FLAG;
else
cf->can_id &= CAN_SFF_MASK;
- cf->can_dlc = get_can_dlc(msg->u.log_message.dlc);
+ cf->can_dlc = get_can_dlc(msg->u.leaf.log_message.dlc);
- if (msg->u.log_message.flags & MSG_FLAG_REMOTE_FRAME)
+ if (msg->u.leaf.log_message.flags & MSG_FLAG_REMOTE_FRAME)
cf->can_id |= CAN_RTR_FLAG;
else
- memcpy(cf->data, &msg->u.log_message.data,
+ memcpy(cf->data, &msg->u.leaf.log_message.data,
cf->can_dlc);
} else {
- cf->can_id = ((msg->u.rx_can.msg[0] & 0x1f) << 6) |
- (msg->u.rx_can.msg[1] & 0x3f);
+ cf->can_id = ((rx_msg[0] & 0x1f) << 6) | (rx_msg[1] & 0x3f);
if (msg->id == CMD_RX_EXT_MESSAGE) {
cf->can_id <<= 18;
- cf->can_id |= ((msg->u.rx_can.msg[2] & 0x0f) << 14) |
- ((msg->u.rx_can.msg[3] & 0xff) << 6) |
- (msg->u.rx_can.msg[4] & 0x3f);
+ cf->can_id |= ((rx_msg[2] & 0x0f) << 14) |
+ ((rx_msg[3] & 0xff) << 6) |
+ (rx_msg[4] & 0x3f);
cf->can_id |= CAN_EFF_FLAG;
}
- cf->can_dlc = get_can_dlc(msg->u.rx_can.msg[5]);
+ cf->can_dlc = get_can_dlc(rx_msg[5]);
- if (msg->u.rx_can.flag & MSG_FLAG_REMOTE_FRAME)
+ if (msg->u.rx_can_header.flag & MSG_FLAG_REMOTE_FRAME)
cf->can_id |= CAN_RTR_FLAG;
else
- memcpy(cf->data, &msg->u.rx_can.msg[6],
+ memcpy(cf->data, &rx_msg[6],
cf->can_dlc);
}
@@ -944,21 +1252,35 @@ static void kvaser_usb_handle_message(const struct kvaser_usb *dev,
case CMD_RX_STD_MESSAGE:
case CMD_RX_EXT_MESSAGE:
- case CMD_LOG_MESSAGE:
+ kvaser_usb_rx_can_msg(dev, msg);
+ break;
+
+ case CMD_LEAF_LOG_MESSAGE:
+ if (dev->family != KVASER_LEAF)
+ goto warn;
kvaser_usb_rx_can_msg(dev, msg);
break;
case CMD_CHIP_STATE_EVENT:
case CMD_CAN_ERROR_EVENT:
- kvaser_usb_rx_error(dev, msg);
+ if (dev->family == KVASER_LEAF)
+ kvaser_leaf_rx_error(dev, msg);
+ else
+ kvaser_usbcan_rx_error(dev, msg);
break;
case CMD_TX_ACKNOWLEDGE:
kvaser_usb_tx_acknowledge(dev, msg);
break;
+ /* Ignored messages */
+ case CMD_USBCAN_CLOCK_OVERFLOW_EVENT:
+ if (dev->family != KVASER_USBCAN)
+ goto warn;
+ break;
+
default:
- dev_warn(dev->udev->dev.parent,
+warn: dev_warn(dev->udev->dev.parent,
"Unhandled message (%d)\n", msg->id);
break;
}
@@ -1178,7 +1500,7 @@ static void kvaser_usb_unlink_all_urbs(struct kvaser_usb *dev)
dev->rxbuf[i],
dev->rxbuf_dma[i]);
- for (i = 0; i < MAX_NET_DEVICES; i++) {
+ for (i = 0; i < dev->nchannels; i++) {
struct kvaser_usb_net_priv *priv = dev->nets[i];
if (priv)
@@ -1286,6 +1608,7 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
struct kvaser_msg *msg;
int i, err;
int ret = NETDEV_TX_OK;
+ uint8_t *msg_tx_can_flags;
if (can_dropped_invalid_skb(netdev, skb))
return NETDEV_TX_OK;
@@ -1307,9 +1630,23 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
msg = buf;
msg->len = MSG_HEADER_LEN + sizeof(struct kvaser_msg_tx_can);
- msg->u.tx_can.flags = 0;
msg->u.tx_can.channel = priv->channel;
+ switch (dev->family) {
+ case KVASER_LEAF:
+ msg_tx_can_flags = &msg->u.tx_can.leaf.flags;
+ break;
+ case KVASER_USBCAN:
+ msg_tx_can_flags = &msg->u.tx_can.usbcan.flags;
+ break;
+ default:
+ dev_err(dev->udev->dev.parent,
+ "Invalid device family (%d)\n", dev->family);
+ goto releasebuf;
+ }
+
+ *msg_tx_can_flags = 0;
+
if (cf->can_id & CAN_EFF_FLAG) {
msg->id = CMD_TX_EXT_MESSAGE;
msg->u.tx_can.msg[0] = (cf->can_id >> 24) & 0x1f;
@@ -1327,7 +1664,7 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
memcpy(&msg->u.tx_can.msg[6], cf->data, cf->can_dlc);
if (cf->can_id & CAN_RTR_FLAG)
- msg->u.tx_can.flags |= MSG_FLAG_REMOTE_FRAME;
+ *msg_tx_can_flags |= MSG_FLAG_REMOTE_FRAME;
for (i = 0; i < ARRAY_SIZE(priv->tx_contexts); i++) {
if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) {
@@ -1596,6 +1933,17 @@ static int kvaser_usb_probe(struct usb_interface *intf,
if (!dev)
return -ENOMEM;
+ if (kvaser_is_leaf(id)) {
+ dev->family = KVASER_LEAF;
+ } else if (kvaser_is_usbcan(id)) {
+ dev->family = KVASER_USBCAN;
+ } else {
+ dev_err(&intf->dev,
+ "Product ID (%d) does not belong to any known Kvaser USB family",
+ id->idProduct);
+ return -ENODEV;
+ }
+
err = kvaser_usb_get_endpoints(intf, &dev->bulk_in, &dev->bulk_out);
if (err) {
dev_err(&intf->dev, "Cannot get usb endpoint(s)");
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists