lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1421097825-396-2-git-send-email-alexandre.belloni@free-electrons.com>
Date:	Mon, 12 Jan 2015 22:23:40 +0100
From:	Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To:	Nicolas Ferre <nicolas.ferre@...el.com>
Cc:	Boris Brezillon <boris.brezillon@...e-electrons.com>,
	Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Subject: [PATCH 1/6] ARM: at91: pm: rework cpu detection

Store SoC differences in a struct to remove cpu_is_* usage.

Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
---
 arch/arm/mach-at91/pm.c | 54 ++++++++++++++++++++++++++++++-------------------
 1 file changed, 33 insertions(+), 21 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 9b15169a1c62..79aa793d1f00 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -17,6 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/sysfs.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/clk/at91_pmc.h>
@@ -32,6 +33,11 @@
 #include "generic.h"
 #include "pm.h"
 
+static struct {
+	unsigned long uhp_udp_mask;
+	int memctrl;
+} at91_pm_data;
+
 static void (*at91_pm_standby)(void);
 
 static int at91_pm_valid_state(suspend_state_t state)
@@ -71,17 +77,9 @@ static int at91_pm_verify_clocks(void)
 	scsr = at91_pmc_read(AT91_PMC_SCSR);
 
 	/* USB must not be using PLLB */
-	if (cpu_is_at91rm9200()) {
-		if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) {
-			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
-			return 0;
-		}
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()
-			|| cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) {
-		if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
-			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
-			return 0;
-		}
+	if ((scsr & at91_pm_data.uhp_udp_mask) != 0) {
+		pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
+		return 0;
 	}
 
 	/* PCK0..PCK3 must be disabled, or configured to use clk32k */
@@ -149,18 +147,13 @@ static int at91_pm_enter(suspend_state_t state)
 			 * turning off the main oscillator; reverse on wakeup.
 			 */
 			if (slow_clock) {
-				int memctrl = AT91_MEMCTRL_SDRAMC;
-
-				if (cpu_is_at91rm9200())
-					memctrl = AT91_MEMCTRL_MC;
-				else if (cpu_is_at91sam9g45())
-					memctrl = AT91_MEMCTRL_DDRSDR;
 #ifdef CONFIG_AT91_SLOW_CLOCK
 				/* copy slow_clock handler to SRAM, and call it */
 				memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
 #endif
 				slow_clock(at91_pmc_base, at91_ramc_base[0],
-					   at91_ramc_base[1], memctrl);
+					   at91_ramc_base[1],
+					   at91_pm_data.memctrl);
 				break;
 			} else {
 				pr_info("AT91: PM - no slow clock mode enabled ...\n");
@@ -237,10 +230,29 @@ static int __init at91_pm_init(void)
 
 	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
 
-	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
-	if (cpu_is_at91rm9200())
+	at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
+
+	if (of_machine_is_compatible("atmel,at91rm9200")) {
+		/*
+		 * AT91RM9200 SDRAM low-power mode cannot be used with
+		 * self-refresh.
+		 */
 		at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
-	
+
+		at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP |
+					    AT91RM9200_PMC_UDP;
+		at91_pm_data.memctrl = AT91_MEMCTRL_MC;
+	} else if (of_machine_is_compatible("atmel,at91sam9260") ||
+		   of_machine_is_compatible("atmel,at91sam9g20") ||
+		   of_machine_is_compatible("atmel,at91sam9261") ||
+		   of_machine_is_compatible("atmel,at91sam9g10") ||
+		   of_machine_is_compatible("atmel,at91sam9263")) {
+		at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP |
+					    AT91SAM926x_PMC_UDP;
+	} else if (of_machine_is_compatible("atmel,at91sam9g45")) {
+		at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
+	}
+
 	if (at91_cpuidle_device.dev.platform_data)
 		platform_device_register(&at91_cpuidle_device);
 
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ