linux-kernel - Re: [PATCH RESEND 0/4] Small updates to Snow and Peach Pit/Pi DTS

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <54B3A4C2.8070304@collabora.co.uk>
Date:	Mon, 12 Jan 2015 11:41:06 +0100
From:	Javier Martinez Canillas <javier.martinez@...labora.co.uk>
To:	Kukjin Kim <kgene.kim@...sung.com>
CC:	Doug Anderson <dianders@...omium.org>,
	Kevin Hilman <khilman@...aro.org>,
	Olof Johansson <olof@...om.net>,
	linux-samsung-soc@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH RESEND 0/4] Small updates to Snow and Peach Pit/Pi DTS

Hello Kukjin,

On 01/02/2015 04:24 PM, Javier Martinez Canillas wrote:
> 
> This series adds some DTS snippets that were missing in the mainline
> Snow and Peach Pit/Pi Device Trees but are present in the downstream
> ChromeOS kernel.
> 
> The series is composed of the following patches:
> 
> Javier Martinez Canillas (4):
>   ARM: dts: Add power and lid GPIO keys pinctrl for exynos5250-snow
>   ARM: dts: Add lid GPIO key device node for Peach boards
>   ARM: dts: Set Peach boards USB WebCam regulators to always on
>   ARM: dts: Configure regulators for suspend on exynos Peach boards
> 
>  arch/arm/boot/dts/exynos5250-snow.dts      |  16 +++++
>  arch/arm/boot/dts/exynos5420-peach-pit.dts | 100 +++++++++++++++++++++++++++-
>  arch/arm/boot/dts/exynos5800-peach-pi.dts  | 101 ++++++++++++++++++++++++++++-
>  3 files changed, 215 insertions(+), 2 deletions(-)
> 
> Patch #1 adds some pinctrl lines for the GPIO keys in the Snow DTS.
> 
> Patch #2 adds a device node and pinctrl lines for the lid GPIO in
> the Peach boards DTS.
> 
> Patch #3 sets the regulators that supply voltage to the USB WebCam
> in Peach boards as always on.
> 
> Patch #4 configures the max77802 regulators on the Peach Pit and Pi
> boards to be enabled or disabled during system suspend.
> 

I saw that you collected some DTS patches for 3.20 but these are not
included. Any comments about this series?

Thanks a lot and best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/