| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8322374EB97AA24A95D0DDBFC8F1CA1DBF987C@SISMBEV01.sis.com.tw>
Date: Mon, 12 Jan 2015 18:55:06 +0800
From: 曾婷葳 (tammy_tseng) <tammy_tseng@....com>
To: <linux-kernel@...r.kernel.org>, <linux-input@...r.kernel.org>
Cc: <tammy0524@...il.com>,
曾婷葳 (tammy_tseng) <tammy_tseng@....com>
Subject: RE: [PATCH 2/2] INPUT/HID: add touch support for SiS touch driver
Hi,
This package of patch is to add support for multitouch behavior for SiS touch products.
The patch of SiS hid multitouch driver is in hid.
Signed-off-by: Tammy Tseng <tammy_tseng@....com>
--
diff --git a/linux-3.18.1/drivers/hid/Kconfig b/linux-3.18.1/drivers/hid/Kconfig
index f42df4d..2be7677 100644
--- a/linux-3.18.1/drivers/hid/Kconfig
+++ b/linux-3.18.1/drivers/hid/Kconfig
@@ -494,7 +494,35 @@ config HID_MULTITOUCH
If unsure, say N.
To compile this driver as a module, choose M here: the
- module will be called hid-multitouch.
+ module will be called hid-multitouch.
+
+config HID_MT_DBG_POINT
+ bool "HID Multitouch panels debug for touch point"
+ depends on HID_MULTITOUCH
+ default n
+ ---help---
+ Show debug message for touch point information.
+
+config HID_MT_DBG_MAP_INIT
+ bool "HID Multitouch panels debug mapping initial"
+ depends on HID_MULTITOUCH
+ default n
+ ---help---
+ Show debug message for mapping initial information.
+
+config HID_SIS_CTRL
+ tristate "SiS Touch Device Controller"
+ depends on HID_MULTITOUCH
+ ---help---
+ Support for SiS Touch devices update FW.
+
+config DEBUG_HID_SIS_UPDATE_FW
+ bool "SiS Touch device debug message(update firmware)"
+ depends on HID_SIS_CTRL
+ default n
+ ---help---
+ Say Y here if you want to enable debug message(update firmware) for SiS Touch
+ devices. Must enable config HID_SIS_UPDATE_FW first.
config HID_NTRIG
tristate "N-Trig touch screen"
diff --git a/linux-3.18.1/drivers/hid/Makefile b/linux-3.18.1/drivers/hid/Makefile
index e2850d8..02dc20d 100644
--- a/linux-3.18.1/drivers/hid/Makefile
+++ b/linux-3.18.1/drivers/hid/Makefile
@@ -33,6 +33,7 @@ ifdef CONFIG_DEBUG_FS
hid-wiimote-y += hid-wiimote-debug.o
endif
+obj-$(CONFIG_HID_SIS_CTRL) += hid-sis_ctrl.o
obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o
obj-$(CONFIG_HID_ACRUX) += hid-axff.o
obj-$(CONFIG_HID_APPLE) += hid-apple.o
diff --git a/linux-3.18.1/drivers/hid/hid-ids.h b/linux-3.18.1/drivers/hid/hid-ids.h
index 7c86373..c598e8d 100644
--- a/linux-3.18.1/drivers/hid/hid-ids.h
+++ b/linux-3.18.1/drivers/hid/hid-ids.h
@@ -807,6 +807,7 @@
#define USB_VENDOR_ID_SIS_TOUCH 0x0457
#define USB_DEVICE_ID_SIS9200_TOUCH 0x9200
#define USB_DEVICE_ID_SIS817_TOUCH 0x0817
+#define USB_PRODUCT_ID_SISF817_TOUCH 0xF817
#define USB_DEVICE_ID_SIS_TS 0x1013
#define USB_DEVICE_ID_SIS1030_TOUCH 0x1030
diff --git a/linux-3.18.1/drivers/hid/hid-multitouch.c b/linux-3.18.1/drivers/hid/hid-multitouch.c
index 51e25b9..31e28dd 100644
--- a/linux-3.18.1/drivers/hid/hid-multitouch.c
+++ b/linux-3.18.1/drivers/hid/hid-multitouch.c
@@ -45,7 +45,7 @@
#include <linux/usb.h>
#include <linux/input/mt.h>
#include <linux/string.h>
-
+#include "hid-sis_ctrl.h"
MODULE_AUTHOR("Stephane Chatty <chatty@...c.fr>");
MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@...il.com>");
@@ -1003,6 +1003,19 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (ret != 0)
return ret;
+ //SiS set noget for not init reports
+ hdev->quirks |= HID_QUIRK_NOGET;
+ printk(KERN_INFO "sis:sis-probe: quirk = %x\n", hdev->quirks);
+
+ //SiS FW update
+#ifdef CONFIG_HID_SIS_CTRL
+ ret = sis_setup_chardev(hdev);
+ if(ret)
+ {
+ printk( KERN_INFO "sis_setup_chardev fail\n");
+ }
+#endif //CONFIG_HID_SIS_CTRL
+
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret)
return ret;
@@ -1041,6 +1054,10 @@ static int mt_resume(struct hid_device *hdev)
static void mt_remove(struct hid_device *hdev)
{
+ //SiS FW update
+#ifdef CONFIG_HID_SIS_CTRL
+ sis_deinit_chardev();
+#endif //CONFIG_HID_SIS_CTRL
sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group);
hid_hw_stop(hdev);
}
diff --git a/linux-3.18.1/drivers/hid/hid-sis_ctrl.c b/linux-3.18.1/drivers/hid/hid-sis_ctrl.c
new file mode 100644
index 0000000..2794b65
--- /dev/null
+++ b/linux-3.18.1/drivers/hid/hid-sis_ctrl.c
@@ -0,0 +1,397 @@
+/*
+ * Character device driver for SIS multitouch panels control
+ *
+ * Copyright (c) 2009 SIS, Ltd.
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usbhid/usbhid.h"
+#include <linux/init.h>
+
+//update FW
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <asm/uaccess.h> //copy_from_user() & copy_to_user()
+
+#include "hid-ids.h"
+#include "hid-sis_ctrl.h"
+
+static int sis_char_devs_count = 1; /* device count */
+static int sis_char_major = 0;
+static struct cdev sis_char_cdev;
+static struct class *sis_char_class = NULL;
+
+static struct hid_device *hid_dev_backup = NULL; //backup address
+static struct urb *backup_urb = NULL;
+
+#ifdef CONFIG_DEBUG_HID_SIS_UPDATE_FW
+ #define DBG_FW(fmt, arg...) printk( fmt, ##arg )
+ void sis_dbg_dump_array( u8 *ptr, u32 size)
+ {
+ u32 i;
+ for (i=0; i<size; i++)
+ {
+ DBG_FW ("%02X ", ptr[i]);
+ if( ((i+1)&0xF) == 0)
+ DBG_FW ("\n");
+ }
+ if( size & 0xF)
+ DBG_FW ("\n");
+ }
+#else
+ #define DBG_FW(...)
+ #define sis_dbg_dump_array(...)
+#endif // CONFIG_DEBUG_HID_SIS_UPDATE_FW
+
+
+int sis_cdev_open(struct inode *inode, struct file *filp) //20120306 Yuger ioctl for tool
+{
+ struct usbhid_device *usbhid;
+
+ DBG_FW( "%s\n" , __FUNCTION__ );
+ //20110511, Yuger, kill current urb by method of usbhid_stop
+ if ( !hid_dev_backup )
+ {
+ printk( KERN_INFO "(stop)hid_dev_backup is not initialized yet" );
+ return -1;
+ }
+
+ usbhid = hid_dev_backup->driver_data;
+
+ printk( KERN_INFO "sys_sis_HID_stop\n" );
+
+ //printk( KERN_INFO "hid_dev_backup->vendor, hid_dev_backup->product = %x %x\n", hid_dev_backup->vendor, hid_dev_backup->product );
+
+ //20110602, Yuger, fix bug: not contact usb cause kernel panic
+ if( !usbhid )
+ {
+ printk( KERN_INFO "(stop)usbhid is not initialized yet" );
+ return -1;
+ }
+ else if ( !usbhid->urbin )
+ {
+ printk( KERN_INFO "(stop)usbhid->urbin is not initialized yet" );
+ return -1;
+ }
+ else if (hid_dev_backup->vendor == USB_VENDOR_ID_SIS2_TOUCH)
+ {
+ usb_fill_int_urb(backup_urb, usbhid->urbin->dev, usbhid->urbin->pipe,
+ usbhid->urbin->transfer_buffer, usbhid->urbin->transfer_buffer_length,
+ usbhid->urbin->complete, usbhid->urbin->context, usbhid->urbin->interval);
+
+ clear_bit( HID_STARTED, &usbhid->iofl );
+ set_bit( HID_DISCONNECTED, &usbhid->iofl );
+
+ usb_kill_urb( usbhid->urbin );
+ usb_free_urb( usbhid->urbin );
+ usbhid->urbin = NULL;
+ return 0;
+ }
+ else
+ {
+ printk (KERN_INFO "This is not a SiS device");
+ return -801;
+ }
+}
+
+int sis_cdev_release(struct inode *inode, struct file *filp)
+{
+ //20110505, Yuger, rebuild the urb which is at the same urb address, then re-submit it
+
+ int ret;
+ struct usbhid_device *usbhid;
+ unsigned long flags;
+
+ DBG_FW( "%s: " , __FUNCTION__ );
+
+ if ( !hid_dev_backup )
+ {
+ printk( KERN_INFO "(stop)hid_dev_backup is not initialized yet" );
+ return -1;
+ }
+
+ usbhid = hid_dev_backup->driver_data;
+
+ printk( KERN_INFO "sys_sis_HID_start" );
+
+ if( !usbhid )
+ {
+ printk( KERN_INFO "(start)usbhid is not initialized yet" );
+ return -1;
+ }
+
+ if( !backup_urb )
+ {
+ printk( KERN_INFO "(start)backup_urb is not initialized yet" );
+ return -1;
+ }
+
+ clear_bit( HID_DISCONNECTED, &usbhid->iofl );
+ usbhid->urbin = usb_alloc_urb( 0, GFP_KERNEL );
+
+ if( !backup_urb->interval )
+ {
+ printk( KERN_INFO "(start)backup_urb->interval does not exist" );
+ return -1;
+ }
+
+ usb_fill_int_urb(usbhid->urbin, backup_urb->dev, backup_urb->pipe,
+ backup_urb->transfer_buffer, backup_urb->transfer_buffer_length,
+ backup_urb->complete, backup_urb->context, backup_urb->interval);
+ usbhid->urbin->transfer_dma = usbhid->inbuf_dma;
+ usbhid->urbin->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ set_bit( HID_STARTED, &usbhid->iofl );
+
+ //method at hid_start_in
+ spin_lock_irqsave( &usbhid->lock, flags );
+ ret = usb_submit_urb( usbhid->urbin, GFP_ATOMIC );
+ spin_unlock_irqrestore( &usbhid->lock, flags );
+ //yy
+
+ DBG_FW( "ret = %d", ret );
+
+ return ret;
+}
+
+//SiS 817 only
+ssize_t sis_cdev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
+{
+ int actual_length = 0, timeout = 0;
+ u8 *rep_data = NULL;
+ u16 size = 0;
+ long rep_ret;
+ struct usb_interface *intf = to_usb_interface(hid_dev_backup->dev.parent);
+ struct usb_device *dev = interface_to_usbdev(intf);
+
+ DBG_FW( "%s\n" , __FUNCTION__ );
+
+ size = (((u16)(buf[64] & 0xff)) << 24) + (((u16)(buf[65] & 0xff)) << 16) +
+ (((u16)(buf[66] & 0xff)) << 8) + (u16)(buf[67] & 0xff);
+ timeout = (((int)(buf[68] & 0xff)) << 24) + (((int)(buf[69] & 0xff)) << 16) +
+ (((int)(buf[70] & 0xff)) << 8) + (int)(buf[71] & 0xff);
+
+ rep_data = kzalloc(size, GFP_KERNEL);
+ if (!rep_data)
+ return -12;
+
+ if ( copy_from_user( rep_data, (void*)buf, size) )
+ {
+ printk( KERN_INFO "copy_to_user fail\n" );
+ //free allocated data
+ kfree( rep_data );
+ rep_data = NULL;
+ return -19;
+ }
+
+ rep_ret = usb_interrupt_msg(dev, backup_urb->pipe,
+ rep_data, size, &actual_length, timeout);
+
+ DBG_FW( "%s: rep_data = ", __FUNCTION__);
+ sis_dbg_dump_array( rep_data, 8);
+
+ if( rep_ret == 0 )
+ {
+ rep_ret = actual_length;
+ if ( copy_to_user( (void*)buf, rep_data, rep_ret ) )
+ {
+ printk( KERN_INFO "copy_to_user fail\n" );
+ //free allocated data
+ kfree( rep_data );
+ rep_data = NULL;
+ return -19;
+ }
+ }
+
+ //free allocated data
+ kfree( rep_data );
+ rep_data = NULL;
+ DBG_FW( "%s: rep_ret = %ld\n", __FUNCTION__,rep_ret );
+ return rep_ret;
+}
+
+ssize_t sis_cdev_write( struct file *file, const char __user *buf, size_t count, loff_t *f_pos )
+{
+ int actual_length = 0;
+ u8 *rep_data = NULL;
+ long rep_ret;
+ struct usb_interface *intf = to_usb_interface( hid_dev_backup->dev.parent );
+ struct usb_device *dev = interface_to_usbdev( intf );
+ struct usbhid_device *usbhid = hid_dev_backup->driver_data;
+
+ u16 size = (((u16)(buf[64] & 0xff)) << 24) + (((u16)(buf[65] & 0xff)) << 16) +
+ (((u16)(buf[66] & 0xff)) << 8) + (u16)(buf[67] & 0xff);
+ int timeout = (((int)(buf[68] & 0xff)) << 24) + (((int)(buf[69] & 0xff)) << 16) +
+ (((int)(buf[70] & 0xff)) << 8) + (int)(buf[71] & 0xff);
+
+ DBG_FW( "%s: 817 method, " , __FUNCTION__ );
+ DBG_FW("timeout = %d, size %d\n", timeout, size);
+
+ rep_data = kzalloc(size, GFP_KERNEL);
+ if (!rep_data)
+ return -12;
+
+ if ( copy_from_user( rep_data, (void*)buf, size) )
+ {
+ printk( KERN_INFO "copy_to_user fail\n" );
+ //free allocated data
+ kfree( rep_data );
+ rep_data = NULL;
+ return -19;
+ }
+
+ rep_ret = usb_interrupt_msg( dev, usbhid->urbout->pipe,
+ rep_data, size, &actual_length, timeout );
+
+ DBG_FW( "%s: rep_data = ", __FUNCTION__);
+ sis_dbg_dump_array( rep_data, size);
+
+ if( rep_ret == 0 )
+ {
+ rep_ret = actual_length;
+ if ( copy_to_user( (void*)buf, rep_data, rep_ret ) )
+ {
+ printk( KERN_INFO "copy_to_user fail\n" );
+ //free allocated data
+ kfree( rep_data );
+ rep_data = NULL;
+ return -19;
+ }
+ }
+ DBG_FW( "%s: rep_ret = %ld\n", __FUNCTION__,rep_ret );
+
+ //free allocated data
+ kfree( rep_data );
+ rep_data = NULL;
+
+ DBG_FW( "End of sys_sis_HID_IO\n" );
+ return rep_ret;
+}
+
+
+//for ioctl
+static const struct file_operations sis_cdev_fops = {
+ .owner = THIS_MODULE,
+ .read = sis_cdev_read,
+ .write = sis_cdev_write,
+ .open = sis_cdev_open,
+ .release= sis_cdev_release,
+};
+
+//for ioctl
+int sis_setup_chardev(struct hid_device *hdev)
+{
+
+ dev_t dev = MKDEV(sis_char_major, 0);
+ int alloc_ret = 0;
+ int cdev_err = 0;
+ int input_err = 0;
+ struct device *class_dev = NULL;
+ void *ptr_err;
+
+ printk("sis_setup_chardev.\n");
+ hid_dev_backup = hdev;
+
+ backup_urb = usb_alloc_urb(0, GFP_KERNEL); //0721test
+ if (!backup_urb) {
+ dev_err(&hdev->dev, "cannot allocate backup_urb\n");
+ return -ENOMEM;
+ }
+/*
+ if (nd == NULL)
+ {
+ input_err = -ENOMEM;
+ goto error;
+ }
+*/
+ // dynamic allocate driver handle
+ if (hdev->product == USB_PRODUCT_ID_SISF817_TOUCH)
+ alloc_ret = alloc_chrdev_region(&dev, 0, sis_char_devs_count, SISF817_DEVICE_NAME);
+ else
+ alloc_ret = alloc_chrdev_region(&dev, 0, sis_char_devs_count, SIS817_DEVICE_NAME);
+
+ if (alloc_ret)
+ goto error;
+
+ sis_char_major = MAJOR(dev);
+ cdev_init(&sis_char_cdev, &sis_cdev_fops);
+ sis_char_cdev.owner = THIS_MODULE;
+ cdev_err = cdev_add(&sis_char_cdev, MKDEV(sis_char_major, 0), sis_char_devs_count);
+ if (cdev_err)
+ goto error;
+
+ if (hdev->product == USB_PRODUCT_ID_SISF817_TOUCH)
+ printk(KERN_INFO "%s driver(major %d) installed.\n", SISF817_DEVICE_NAME, sis_char_major);
+ else
+ printk(KERN_INFO "%s driver(major %d) installed.\n", SIS817_DEVICE_NAME, sis_char_major);
+
+ // register class
+ if (hdev->product == USB_PRODUCT_ID_SISF817_TOUCH)
+ sis_char_class = class_create(THIS_MODULE, SISF817_DEVICE_NAME);
+ else if (hdev->product == USB_PRODUCT_ID_SIS817_TOUCH)
+ sis_char_class = class_create(THIS_MODULE, SIS817_DEVICE_NAME);
+
+ if(IS_ERR(ptr_err = sis_char_class))
+ {
+ goto err2;
+ }
+
+ if (hdev->product == USB_PRODUCT_ID_SISF817_TOUCH)
+ class_dev = device_create(sis_char_class, NULL, MKDEV(sis_char_major, 0), NULL, SISF817_DEVICE_NAME);
+ else if (hdev->product == USB_PRODUCT_ID_SIS817_TOUCH)
+ class_dev = device_create(sis_char_class, NULL, MKDEV(sis_char_major, 0), NULL, SIS817_DEVICE_NAME);
+
+ if(IS_ERR(ptr_err = class_dev))
+ {
+ goto err;
+ }
+
+ return 0;
+error:
+ if (cdev_err == 0)
+ cdev_del(&sis_char_cdev);
+ if (alloc_ret == 0)
+ unregister_chrdev_region(MKDEV(sis_char_major, 0), sis_char_devs_count);
+ if(input_err != 0)
+ {
+ printk("sis_ts_bak error!\n");
+ }
+err:
+ device_destroy(sis_char_class, MKDEV(sis_char_major, 0));
+err2:
+ class_destroy(sis_char_class);
+ return -1;
+}
+EXPORT_SYMBOL(sis_setup_chardev);
+
+void sis_deinit_chardev(void)
+{
+ //for ioctl
+ dev_t dev;
+ printk(KERN_INFO "sis_remove\n");
+
+ dev = MKDEV(sis_char_major, 0);
+ cdev_del(&sis_char_cdev);
+ unregister_chrdev_region(dev, sis_char_devs_count);
+ device_destroy(sis_char_class, MKDEV(sis_char_major, 0));
+ class_destroy(sis_char_class);
+ usb_kill_urb( backup_urb );
+ usb_free_urb( backup_urb );
+ backup_urb = NULL;
+ hid_dev_backup = NULL;
+
+}
+EXPORT_SYMBOL(sis_deinit_chardev);
+
+MODULE_DESCRIPTION("SiS 817 Touchscreen Control Driver");
+MODULE_LICENSE("GPL");
diff --git a/linux-3.18.1/drivers/hid/hid-sis_ctrl.h b/linux-3.18.1/drivers/hid/hid-sis_ctrl.h
new file mode 100644
index 0000000..c7425c5
--- /dev/null
+++ b/linux-3.18.1/drivers/hid/hid-sis_ctrl.h
@@ -0,0 +1,19 @@
+#ifndef __HID_SIS_CTRL_H__
+#define __HID_SIS_CTRL_H__
+
+#define SIS817_DEVICE_NAME "sis_aegis_hid_touch_device"
+#define SISF817_DEVICE_NAME "sis_aegis_hid_bridge_touch_device"
+
+#define CTRL 0
+#define ENDP_01 1
+#define ENDP_02 2
+#define DIR_IN 0x1
+
+int sis_cdev_open(struct inode *inode, struct file *filp);
+int sis_cdev_release(struct inode *inode, struct file *filp);
+ssize_t sis_cdev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos);
+ssize_t sis_cdev_write( struct file *file, const char __user *buf, size_t count, loff_t *f_pos );
+int sis_setup_chardev(struct hid_device *hdev);
+void sis_deinit_chardev(void);
+
+#endif // __HID_SIS_CTRL_H__
diff --git a/linux-3.18.1/drivers/input/touchscreen/Kconfig b/linux-3.18.1/drivers/input/touchscreen/Kconfig
index e1d8003..edc8e27 100644
--- a/linux-3.18.1/drivers/input/touchscreen/Kconfig
+++ b/linux-3.18.1/drivers/input/touchscreen/Kconfig
@@ -962,4 +962,18 @@ config TOUCHSCREEN_ZFORCE
To compile this driver as a module, choose M here: the
module will be called zforce_ts.
+config TOUCHSCREEN_SIS_I2C
+ tristate "SiS 9200 family I2C touchscreen driver"
+ depends on I2C
+ default y
+ help
+ This enables support for SiS 9200 family over I2C based touchscreens.
+
+config FW_SUPPORT_POWERMODE
+ default n
+ bool "SiS FW support power mode"
+ depends on TOUCHSCREEN_SIS_I2C
+ help
+ This enables support power mode provided by SiS firmwave
+
endif
diff --git a/linux-3.18.1/drivers/input/touchscreen/Makefile b/linux-3.18.1/drivers/input/touchscreen/Makefile
index 090e61c..e316477 100644
--- a/linux-3.18.1/drivers/input/touchscreen/Makefile
+++ b/linux-3.18.1/drivers/input/touchscreen/Makefile
@@ -6,6 +6,10 @@
wm97xx-ts-y := wm97xx-core.o
+ifdef CONFIG_TOUCHSCREEN_SIS_I2C
+obj-$(CONFIG_TOUCHSCREEN_SIS_I2C) += sis_i2c.o
+endif
+
obj-$(CONFIG_OF_TOUCHSCREEN) += of_touchscreen.o
obj-$(CONFIG_TOUCHSCREEN_88PM860X) += 88pm860x-ts.o
obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o
diff --git a/linux-3.18.1/drivers/input/touchscreen/sis_i2c.c b/linux-3.18.1/drivers/input/touchscreen/sis_i2c.c
new file mode 100644
index 0000000..2e6fc1a
--- /dev/null
+++ b/linux-3.18.1/drivers/input/touchscreen/sis_i2c.c
@@ -0,0 +1,1725 @@
+/* drivers/input/touchscreen/sis_i2c.c - I2C Touch panel driver for SiS 9200 family
+ *
+ * Copyright (C) 2011 SiS, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Date: 2012/11/13
+ * Version: Android_v2.05.00-A639-1113
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#ifdef CONFIG_HAS_EARLYSUSPEND
+#include <linux/earlysuspend.h>
+#endif
+#include <linux/hrtimer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include "sis_i2c.h"
+#include <linux/linkage.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <asm/uaccess.h>
+#include <linux/irq.h>
+
+#ifdef _STD_RW_IO
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#define DEVICE_NAME "sis_aegis_touch_device"
+static int sis_char_devs_count = 1; /* device count */
+static int sis_char_major = 0;
+static struct cdev sis_char_cdev;
+static struct class *sis_char_class = NULL;
+#endif
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { SIS_SLAVE_ADDR, I2C_CLIENT_END };
+static struct workqueue_struct *sis_wq;
+struct sis_ts_data *ts_bak = 0;
+struct sisTP_driver_data *TPInfo = NULL;
+static void sis_tpinfo_clear(struct sisTP_driver_data *TPInfo, int max);
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void sis_ts_early_suspend(struct early_suspend *h);
+static void sis_ts_late_resume(struct early_suspend *h);
+#endif
+
+#ifdef CONFIG_X86
+//static const struct i2c_client_address_data addr_data;
+/* Insmod parameters */
+static int sis_ts_detect(struct i2c_client *client, struct i2c_board_info *info);
+#endif
+
+#ifdef _CHECK_CRC
+uint16_t cal_crc (char* cmd, int start, int end);
+#endif
+
+void PrintBuffer(int start, int length, char* buf)
+{
+ int i;
+ for ( i = start; i < length; i++ )
+ {
+ printk("%02x ", buf[i]);
+ if (i != 0 && i % 30 == 0)
+ printk("\n");
+ }
+ printk("\n");
+}
+
+int sis_command_for_write(struct i2c_client *client, int wlength, unsigned char *wdata)
+{
+ int ret = -1;
+ struct i2c_msg msg[1];
+
+ msg[0].addr = client->addr;
+ msg[0].flags = 0; //Write
+ msg[0].len = wlength;
+ msg[0].buf = (unsigned char *)wdata;
+
+ ret = i2c_transfer(client->adapter, msg, 1);
+
+ return ret;
+}
+
+int sis_command_for_read(struct i2c_client *client, int rlength, unsigned char *rdata)
+{
+ int ret = -1;
+ struct i2c_msg msg[1];
+
+ msg[0].addr = client->addr;
+ msg[0].flags = I2C_M_RD; //Read
+ msg[0].len = rlength;
+ msg[0].buf = rdata;
+
+ ret = i2c_transfer(client->adapter, msg, 1);
+
+ return ret;
+}
+
+int sis_cul_unit(uint8_t report_id)
+{
+ int basic = 6;
+ int area = 2;
+ int pressure = 1;
+ int ret = basic;
+
+ if (report_id != ALL_IN_ONE_PACKAGE)
+ {
+ if (IS_AREA(report_id) /*&& IS_TOUCH(report_id)*/)
+ {
+ ret += area;
+ }
+ if (IS_PRESSURE(report_id))
+ {
+ ret += pressure;
+ }
+ }
+
+ return ret;
+}
+
+int sis_ReadPacket(struct i2c_client *client, uint8_t cmd, uint8_t* buf)
+{
+ uint8_t tmpbuf[MAX_BYTE] = {0}; //MAX_BYTE = 64;
+#ifdef _CHECK_CRC
+ uint16_t buf_crc = 0;
+ uint16_t package_crc = 0;
+ int l_package_crc = 0;
+ int crc_end = 0;
+#endif
+ int ret = -1;
+ int touchnum = 0;
+ int p_count = 0;
+ int touc_formate_id = 0;
+ int locate = 0;
+ bool read_first = true;
+
+/*
+ New i2c format
+ * buf[0] = Low 8 bits of byte count value
+ * buf[1] = High 8 bits of byte counte value
+ * buf[2] = Report ID
+ * buf[touch num * 6 + 2 ] = Touch informations; 1 touch point has 6 bytes, it could be none if no touch
+ * buf[touch num * 6 + 3] = Touch numbers
+ *
+ * One touch point information include 6 bytes, the order is
+ *
+ * 1. status = touch down or touch up
+ * 2. id = finger id
+ * 3. x axis low 8 bits
+ * 4. x axis high 8 bits
+ * 5. y axis low 8 bits
+ * 6. y axis high 8 bits
+ *
+*/
+ do
+ {
+ if (locate >= PACKET_BUFFER_SIZE)
+ {
+ printk(KERN_ERR "sis_ReadPacket: Buf Overflow\n");
+ return -1;
+ }
+
+ ret = sis_command_for_read(client, MAX_BYTE, tmpbuf);
+
+#ifdef _DEBUG_PACKAGE
+ printk(KERN_INFO "chaoban test: Buf_Data [0~63] \n");
+ PrintBuffer(0, 64, tmpbuf);
+#endif
+
+ if(ret < 0 )
+ {
+ printk(KERN_ERR "sis_ReadPacket: i2c transfer error\n");
+ return ret;
+ }
+ // error package length of receiving data
+ else if (tmpbuf[P_BYTECOUNT] > MAX_BYTE)
+ {
+ printk(KERN_ERR "sis_ReadPacket: Error Bytecount\n");
+ return -1;
+ }
+
+ if (read_first)
+ {
+#ifdef _SUPPORT_BUTTON_TOUCH
+ // access BUTTON TOUCH event and BUTTON NO TOUCH event
+ if (tmpbuf[P_REPORT_ID] == BUTTON_FORMAT)
+ {
+ memcpy(&buf[0], &tmpbuf[0], 7);
+ return touchnum; //touchnum is 0
+ }
+#endif
+ // access NO TOUCH event unless BUTTON NO TOUCH event
+ if (tmpbuf[P_BYTECOUNT] == 0/*NO_TOUCH_BYTECOUNT*/)
+ {
+ return touchnum; //touchnum is 0
+ }
+ }
+
+ //skip parsing data when two devices are registered at the same slave address
+ //parsing data when P_REPORT_ID && 0xf is TOUCH_FORMAT or P_REPORT_ID is ALL_IN_ONE_PACKAGE
+ touc_formate_id = tmpbuf[P_REPORT_ID] & 0xf;
+ if ((touc_formate_id != TOUCH_FORMAT) && (touc_formate_id != HIDI2C_FORMAT) && (tmpbuf[P_REPORT_ID] != ALL_IN_ONE_PACKAGE))
+ {
+ printk(KERN_ERR "sis_ReadPacket: Error Report_ID\n");
+ return -1;
+ }
+
+ p_count = (int) tmpbuf[P_BYTECOUNT] - 1; //start from 0
+ if (tmpbuf[P_REPORT_ID] != ALL_IN_ONE_PACKAGE)
+ {
+ if (IS_TOUCH(tmpbuf[P_REPORT_ID]))
+ {
+ p_count -= BYTE_CRC_I2C; //delete 2 byte crc
+ }
+ else if (IS_HIDI2C(tmpbuf[P_REPORT_ID]))
+ {
+ p_count -= BYTE_CRC_HIDI2C;
+ }
+ else //should not be happen
+ {
+ printk(KERN_ERR "sis_ReadPacket: delete crc error\n");
+ return -1;
+ }
+
+ if (IS_SCANTIME(tmpbuf[P_REPORT_ID]))
+ {
+ p_count -= BYTE_SCANTIME;
+ }
+ }
+ //else {} // For ALL_IN_ONE_PACKAGE
+
+ if (read_first)
+ {
+ touchnum = tmpbuf[p_count];
+ }
+ else
+ {
+ if (tmpbuf[p_count] != 0)
+ {
+ printk(KERN_ERR "sis_ReadPacket: get error package\n");
+ return -1;
+ }
+ }
+
+#ifdef _CHECK_CRC
+ crc_end = p_count + (IS_SCANTIME(tmpbuf[P_REPORT_ID]) * 2);
+ buf_crc = cal_crc(tmpbuf, 2, crc_end); //sub bytecount (2 byte)
+ l_package_crc = p_count + 1 + (IS_SCANTIME(tmpbuf[P_REPORT_ID]) * 2);
+ package_crc = ((tmpbuf[l_package_crc] & 0xff) | ((tmpbuf[l_package_crc + 1] & 0xff) << 8));
+
+ if (buf_crc != package_crc)
+ {
+ printk(KERN_ERR "sis_ReadPacket: CRC Error\n");
+ return -1;
+ }
+#endif
+ memcpy(&buf[locate], &tmpbuf[0], 64); //Buf_Data [0~63] [64~128]
+ locate += 64;
+ read_first = false;
+
+ }while(tmpbuf[P_REPORT_ID] != ALL_IN_ONE_PACKAGE && tmpbuf[p_count] > 5);
+
+ return touchnum;
+}
+
+
+int check_gpio_interrupt(void)
+{
+ int ret = 0;
+ //TODO
+ //CHECK GPIO INTERRUPT STATUS BY YOUR PLATFORM SETTING.
+ ret = gpio_get_value(GPIO_IRQ);
+ return ret;
+}
+
+void ts_report_key(struct i2c_client *client, uint8_t keybit_state)
+{
+ int i = 0;
+ uint8_t diff_keybit_state= 0x0; //check keybit_state is difference with pre_keybit_state
+ uint8_t key_value = 0x0; //button location for binary
+ uint8_t key_pressed = 0x0; //button is up or down
+ struct sis_ts_data *ts = i2c_get_clientdata(client);
+
+ if (!ts)
+ {
+ printk(KERN_ERR "%s error: Missing Platform Data!\n", __func__);
+ return;
+ }
+
+ diff_keybit_state = TPInfo->pre_keybit_state ^ keybit_state;
+
+ if (diff_keybit_state)
+ {
+ for (i = 0; i < BUTTON_KEY_COUNT; i++)
+ {
+ if ((diff_keybit_state >> i) & 0x01)
+ {
+ key_value = diff_keybit_state & (0x01 << i);
+ key_pressed = (keybit_state >> i) & 0x01;
+ switch (key_value)
+ {
+ case MSK_COMP:
+ input_report_key(ts->input_dev, KEY_COMPOSE, key_pressed);
+ printk(KERN_ERR "%s : MSK_COMP %d \n", __func__ , key_pressed);
+ break;
+ case MSK_BACK:
+ input_report_key(ts->input_dev, KEY_BACK, key_pressed);
+ printk(KERN_ERR "%s : MSK_BACK %d \n", __func__ , key_pressed);
+ break;
+ case MSK_MENU:
+ input_report_key(ts->input_dev, KEY_MENU, key_pressed);
+ printk(KERN_ERR "%s : MSK_MENU %d \n", __func__ , key_pressed);
+ break;
+ case MSK_HOME:
+ input_report_key(ts->input_dev, KEY_HOME, key_pressed);
+ printk(KERN_ERR "%s : MSK_HOME %d \n", __func__ , key_pressed);
+ break;
+ case MSK_NOBTN:
+ //Release the button if it touched.
+ default:
+ break;
+ }
+ }
+ }
+ TPInfo->pre_keybit_state = keybit_state;
+ }
+}
+
+
+static void sis_ts_work_func(struct work_struct *work)
+{
+ struct sis_ts_data *ts = container_of(work, struct sis_ts_data, work);
+ int ret = -1;
+ int point_unit;
+ uint8_t buf[PACKET_BUFFER_SIZE] = {0};
+ uint8_t i = 0, fingers = 0;
+ uint8_t px = 0, py = 0, pstatus = 0;
+ uint8_t p_area = 0;
+ uint8_t p_preasure = 0;
+#ifdef _SUPPORT_BUTTON_TOUCH
+ int button_key;
+ uint8_t button_buf[10] = {0};
+#endif
+
+#ifdef _ANDROID_4
+ bool all_touch_up = true;
+#endif
+
+ mutex_lock(&ts->mutex_wq);
+
+ /* I2C or SMBUS block data read */
+ ret = sis_ReadPacket(ts->client, SIS_CMD_NORMAL, buf);
+#ifdef _DEBUG_PACKAGE_WORKFUNC
+ printk(KERN_INFO "chaoban test: Buf_Data [0~63] \n");
+ PrintBuffer(0, 64, buf);
+ if ((buf[P_REPORT_ID] != ALL_IN_ONE_PACKAGE) && (ret > 5))
+ {
+ printk(KERN_INFO "chaoban test: Buf_Data [64~125] \n");
+ PrintBuffer(64, 128, buf);
+ }
+#endif
+
+// add
+#ifdef _SUPPORT_BUTTON_TOUCH
+ sis_ReadPacket(ts->client, SIS_CMD_NORMAL, button_buf);
+#endif
+
+ if (ret < 0) // Error Number
+ {
+ printk(KERN_INFO "chaoban test: ret = -1\n");
+ goto err_free_allocate;
+ }
+#ifdef _SUPPORT_BUTTON_TOUCH
+ // access BUTTON TOUCH event and BUTTON NO TOUCH even
+ else if (button_buf[P_REPORT_ID] == BUTTON_FORMAT)
+ {
+ //fingers = 0; //modify
+ button_key = ((button_buf[BUTTON_STATE] & 0xff) | ((button_buf[BUTTON_STATE + 1] & 0xff)<< 8));
+ ts_report_key(ts->client, button_key);
+ //goto err_free_allocate; //modify
+ }
+#endif
+ // access NO TOUCH event unless BUTTON NO TOUCH event
+ else if (ret == 0)
+ {
+ fingers = 0;
+ sis_tpinfo_clear(TPInfo, MAX_FINGERS);
+ goto label_send_report; //need to report input_mt_sync()
+ }
+
+ sis_tpinfo_clear(TPInfo, MAX_FINGERS);
+
+ /* Parser and Get the sis9200 data */
+ point_unit = sis_cul_unit(buf[P_REPORT_ID]);
+ fingers = ret;
+
+ TPInfo->fingers = fingers = (fingers > MAX_FINGERS ? 0 : fingers);
+
+ for (i = 0; i < fingers; i++) // fingers 10 = 0 ~ 9
+ {
+ if ((buf[P_REPORT_ID] != ALL_IN_ONE_PACKAGE) && (i >= 5))
+ {
+ pstatus = BYTE_BYTECOUNT + BYTE_ReportID + ((i - 5) * point_unit); // Calc point status
+ pstatus += 64;
+ }
+ else
+ {
+ pstatus = BYTE_BYTECOUNT + BYTE_ReportID + (i * point_unit); // Calc point status
+ }
+
+ px = pstatus + 2; // Calc point x_coord
+ py = px + 2; // Calc point y_coord
+
+ if ((buf[pstatus]) == TOUCHUP)
+ {
+ TPInfo->pt[i].Width = 0;
+ TPInfo->pt[i].Height = 0;
+ TPInfo->pt[i].Pressure = 0;
+ }
+ else if (buf[P_REPORT_ID] == ALL_IN_ONE_PACKAGE && (buf[pstatus]) == TOUCHDOWN)
+ {
+ TPInfo->pt[i].Width = 1;
+ TPInfo->pt[i].Height = 1;
+ TPInfo->pt[i].Pressure = 1;
+ }
+ else if ((buf[pstatus]) == TOUCHDOWN)
+ {
+ p_area = py + 2;
+ p_preasure = py + 2 + (IS_AREA(buf[P_REPORT_ID]) * 2);
+
+ //area
+ if (IS_AREA(buf[P_REPORT_ID]))
+ {
+ TPInfo->pt[i].Width = buf[p_area] & 0xff;
+ TPInfo->pt[i].Height = buf[p_area + 1] & 0xff;
+ }
+ else
+ {
+ TPInfo->pt[i].Width = 1;
+ TPInfo->pt[i].Height = 1;
+ }
+ //preasure
+ if (IS_PRESSURE(buf[P_REPORT_ID]))
+ TPInfo->pt[i].Pressure = (buf[p_preasure]);
+ else
+ TPInfo->pt[i].Pressure = 1;
+ }
+ else
+ {
+ printk(KERN_ERR "sis_ts_work_func: Error Touch Status\n");
+ goto err_free_allocate;
+ }
+
+ TPInfo->pt[i].id = (buf[pstatus + 1]);
+ TPInfo->pt[i].x = ((buf[px] & 0xff) | ((buf[px + 1] & 0xff)<< 8));
+ TPInfo->pt[i].y = ((buf[py] & 0xff) | ((buf[py + 1] & 0xff)<< 8));
+ }
+
+#ifdef _DEBUG_REPORT
+ for (i = 0; i < TPInfo->fingers; i++)
+ {
+ printk(KERN_INFO "chaoban test: i = %d, id = %d, x = %d, y = %d, pstatus = %d, width = %d, height = %d, pressure = %d, \n", i, TPInfo->pt[i].id, TPInfo->pt[i].x, TPInfo->pt[i].y, buf[pstatus], TPInfo->pt[i].Width, TPInfo->pt[i].Height, TPInfo->pt[i].Pressure);
+ }
+#endif
+
+label_send_report:
+/* Report co-ordinates to the multi-touch stack */
+#ifdef _ANDROID_4
+ for(i = 0; ((i < TPInfo->fingers) && (i < MAX_FINGERS)); i++)
+ {
+ if(TPInfo->pt[i].Pressure)
+ {
+ TPInfo->pt[i].Width *= AREA_UNIT;
+ input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, TPInfo->pt[i].Width);
+ TPInfo->pt[i].Height *= AREA_UNIT;
+ input_report_abs(ts->input_dev, ABS_MT_TOUCH_MINOR, TPInfo->pt[i].Height);
+ input_report_abs(ts->input_dev, ABS_MT_PRESSURE, TPInfo->pt[i].Pressure);
+ input_report_abs(ts->input_dev, ABS_MT_POSITION_X, TPInfo->pt[i].x);
+ input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, TPInfo->pt[i].y);
+ input_report_abs(ts->input_dev, ABS_MT_TRACKING_ID, TPInfo->pt[i].id); //Android 2.3
+ input_mt_sync(ts->input_dev);
+ all_touch_up = false;
+ }
+
+ if (i == (TPInfo->fingers -1) && all_touch_up == true)
+ {
+ input_mt_sync(ts->input_dev);
+ }
+ }
+
+ if(TPInfo->fingers == 0)
+ {
+ input_mt_sync(ts->input_dev);
+ }
+#else
+ i = 0;
+ do
+ {
+ input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, TPInfo->pt[i].Pressure);
+ input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, TPInfo->pt[i].Width);
+ input_report_abs(ts->input_dev, ABS_MT_WIDTH_MINOR, TPInfo->pt[i].Height);
+ input_report_abs(ts->input_dev, ABS_MT_POSITION_X, TPInfo->pt[i].x);
+ input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, TPInfo->pt[i].y);
+ input_report_abs(ts->input_dev, ABS_MT_TRACKING_ID, TPInfo->pt[i].id); //Android 2.3
+ input_mt_sync(ts->input_dev);
+ i++;
+ }
+ while ((i < TPInfo->fingers) && (i < MAX_FINGERS));
+#endif
+ input_sync(ts->input_dev);
+
+err_free_allocate:
+
+ if (ts->use_irq)
+ {
+#ifdef _INT_MODE_1 //case 1 mode
+ //TODO: After interrupt status low, read i2c bus data by polling, until interrupt status is high
+ ret = check_gpio_interrupt(); //interrupt pin is still LOW, read data until interrupt pin is released.
+ if (!ret)
+ {
+ hrtimer_start(&ts->timer, ktime_set(0, TIMER_NS), HRTIMER_MODE_REL);
+ }
+ else
+ {
+ if (TPInfo->pre_keybit_state)
+ {
+ ts_report_key(ts->client, 0x0); //clear for interrupt
+ }
+
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION (2, 6, 39) )
+ if ((ts->desc->status & IRQ_DISABLED) == IRQ_STATUS_DISABLED)
+#else
+ if ((ts->desc->irq_data.state_use_accessors & IRQD_IRQ_DISABLED) == IRQ_STATUS_DISABLED)
+#endif
+ {
+ enable_irq(ts->client->irq);
+ }
+ }
+#else // case 2 mode
+
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION (2, 6, 39) )
+ if ((ts->desc->status & IRQ_DISABLED) == IRQ_STATUS_DISABLED)
+#else
+ if ((ts->desc->irq_data.state_use_accessors & IRQD_IRQ_DISABLED) == IRQ_STATUS_DISABLED)
+#endif
+ {
+ enable_irq(ts->client->irq);
+ }
+#endif
+ }
+
+ mutex_unlock(&ts->mutex_wq);
+ return;
+}
+
+static void sis_tpinfo_clear(struct sisTP_driver_data *TPInfo, int max)
+{
+ int i = 0;
+ for(i = 0; i < max; i++)
+ {
+ TPInfo->pt[i].id = -1;
+ TPInfo->pt[i].x = 0;
+ TPInfo->pt[i].y = 0;
+ TPInfo->pt[i].Pressure = 0;
+ TPInfo->pt[i].Width = 0;
+ }
+ TPInfo->id = 0x0;
+ TPInfo->fingers = 0;
+}
+
+static enum hrtimer_restart sis_ts_timer_func(struct hrtimer *timer)
+{
+ struct sis_ts_data *ts = container_of(timer, struct sis_ts_data, timer);
+ queue_work(sis_wq, &ts->work);
+ if (!ts->use_irq)
+ { // For Polling mode
+ hrtimer_start(&ts->timer, ktime_set(0, TIMER_NS), HRTIMER_MODE_REL);
+ }
+ return HRTIMER_NORESTART;
+}
+
+static irqreturn_t sis_ts_irq_handler(int irq, void *dev_id)
+{
+ struct sis_ts_data *ts = dev_id;
+
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION (2, 6, 39) )
+ if ((ts->desc->status & IRQ_DISABLED) == IRQ_STATUS_ENABLED)
+#else
+ if ((ts->desc->irq_data.state_use_accessors & IRQD_IRQ_DISABLED) == IRQ_STATUS_ENABLED)
+#endif
+ {
+ disable_irq_nosync(ts->client->irq);
+ }
+ queue_work(sis_wq, &ts->work);
+
+ return IRQ_HANDLED;
+}
+
+static int initial_irq(void)
+{
+ int ret = 0;
+#ifdef _I2C_INT_ENABLE
+ /* initialize gpio and interrupt pins */
+ /* TODO */
+ ret = gpio_request(GPIO_IRQ, "GPIO_133"); // ex. GPIO_133 for interrupt mode
+ if (ret < 0)
+ {
+ // Set Active Low. Please reference the file include/linux/interrupt.h
+ printk(KERN_ERR "sis_ts_probe: Failed to gpio_request\n");
+ printk(KERN_ERR "sis_ts_probe: Fail : gpio_request was called before this driver call\n");
+ }
+ /* setting gpio direction here OR boardinfo file*/
+ /* TODO */
+#else
+ ret = -1;
+#endif
+ return ret;
+}
+
+uint16_t cal_crc (char* cmd, int start, int end)
+{
+ int i = 0;
+ uint16_t crc = 0;
+ for (i = start; i <= end ; i++)
+ {
+ crc = (crc<<8) ^ crc16tab[((crc>>8) ^ cmd[i] )&0x00FF];
+ }
+ return crc;
+}
+
+uint16_t cal_crc_with_cmd (char* data, int start, int end, uint8_t cmd)
+{
+ int i = 0;
+ uint16_t crc = 0;
+
+ crc = (crc<<8) ^ crc16tab[((crc>>8) ^ cmd)&0x00FF];
+ for (i = start; i <= end ; i++)
+ {
+ crc = (crc<<8) ^ crc16tab[((crc>>8) ^ data[i] )&0x00FF];
+ }
+ return crc;
+}
+
+void write_crc (unsigned char *buf, int start, int end)
+{
+ uint16_t crc = 0;
+ crc = cal_crc (buf, start , end);
+ buf[end+1] = (crc >> 8)& 0xff;
+ buf[end+2] = crc & 0xff;
+}
+
+/*
+ * When you will send commad to chip, you should use this function on
+ * the first time.
+ *
+ * Return:If switch success return ture, else return false.
+ */
+bool sis_switch_to_cmd_mode(struct i2c_client *client)
+{
+ int ret = -1;
+ uint8_t tmpbuf[MAX_BYTE] = {0};
+ uint8_t sis817_cmd_active[10] = {0x04, 0x00, 0x08, 0x00, 0x09,
+ 0x00, 0x85, 0x0d, 0x51, 0x09};
+ uint8_t sis817_cmd_enable_diagnosis[10] = {0x04, 0x00, 0x08,
+ 0x00, 0x09, 0x00, 0x85, 0x5c, 0x21, 0x01};
+
+
+
+ //Send 85 CMD - PWR_CMD_ACTIVE
+ ret = sis_command_for_write(client, sizeof(sis817_cmd_active), sis817_cmd_active);
+ if(ret < 0){
+ printk(KERN_ERR "SiS SEND Switch CMD Faile - 85(PWR_CMD_ACTIVE)\n");
+ return false;
+ }
+
+ ret = sis_command_for_read(client, sizeof(tmpbuf), tmpbuf);
+ if(ret < 0){
+ printk(KERN_ERR "SiS READ Switch CMD Faile - 85(PWR_CMD_ACTIVE)\n");
+ return false;
+ }
+
+ if((tmpbuf[BUF_ACK_PLACE_L] == BUF_NACK_L) && (tmpbuf[BUF_ACK_PLACE_H] == BUF_NACK_H)){
+ printk(KERN_ERR "SiS SEND Switch CMD Return NACK - 85(PWR_CMD_ACTIVE)\n");
+ return false;
+ }else if((tmpbuf[BUF_ACK_PLACE_L] != BUF_ACK_L) || (tmpbuf[BUF_ACK_PLACE_H] != BUF_ACK_H)){
+ printk(KERN_ERR "SiS SEND Switch CMD Return Unknow- 85(PWR_CMD_ACTIVE)\n");
+ return false;
+ }
+
+ msleep(100);
+ memset(tmpbuf, 0, sizeof(tmpbuf));
+
+ //Send 85 CMD - ENABLE_DIAGNOSIS_MODE
+ ret = sis_command_for_write(client, sizeof(sis817_cmd_enable_diagnosis), sis817_cmd_enable_diagnosis);
+ if(ret < 0){
+ printk(KERN_ERR "SiS SEND Switch CMD Faile - 85(ENABLE_DIAGNOSIS_MODE)\n");
+ return false;
+ }
+
+ ret = sis_command_for_read(client, sizeof(tmpbuf), tmpbuf);
+ if(ret < 0){
+ printk(KERN_ERR "SiS READ Switch CMD Faile - 85(ENABLE_DIAGNOSIS_MODE)\n");
+ return false;
+ }
+
+ if((tmpbuf[BUF_ACK_PLACE_L] == BUF_NACK_L) && (tmpbuf[BUF_ACK_PLACE_H] == BUF_NACK_H)){
+ printk(KERN_ERR "SiS SEND Switch CMD Return NACK - 85(ENABLE_DIAGNOSIS_MODE)\n");
+ return false;
+ }else if((tmpbuf[BUF_ACK_PLACE_L] != BUF_ACK_L) || (tmpbuf[BUF_ACK_PLACE_H] != BUF_ACK_H)){
+ printk(KERN_ERR "SiS SEND Switch CMD Return Unknow- 85(ENABLE_DIAGNOSIS_MODE)\n");
+ return false;
+ }
+
+ msleep(50);
+ return true;
+}
+
+/*
+ * When chip in the command mode will switch to work, you should use
+ * this function.
+ *
+ * Return:If switch success return ture, else return false.
+ */
+bool sis_switch_to_work_mode(struct i2c_client *client)
+{
+ int ret = -1;
+ uint8_t tmpbuf[MAX_BYTE] = {0};
+ uint8_t sis817_cmd_fwctrl[10] = {0x04, 0x00, 0x08, 0x00, 0x09,
+ 0x00, 0x85, 0x3c, 0x50, 0x09};
+ uint8_t sis817_cmd_disable_diagnosis[10] = {0x04, 0x00, 0x08,
+ 0x00, 0x09, 0x00, 0x85, 0x6d, 0x20, 0x01};
+
+
+ //Send 85 CMD - PWR_CMD_FW_CTRL
+ ret = sis_command_for_write(client, sizeof(sis817_cmd_fwctrl), sis817_cmd_fwctrl);
+ if(ret < 0){
+ printk(KERN_ERR "SiS SEND Switch CMD Faile - 85(PWR_CMD_FW_CTRL)\n");
+ return false;
+ }
+
+ ret = sis_command_for_read(client, sizeof(tmpbuf), tmpbuf);
+ if(ret < 0){
+ printk(KERN_ERR "SiS READ Switch CMD Faile - 85(PWR_CMD_FW_CTRL)\n");
+ return false;
+ }
+
+ if((tmpbuf[BUF_ACK_PLACE_L] == BUF_NACK_L) && (tmpbuf[BUF_ACK_PLACE_H] == BUF_NACK_H)){
+ printk(KERN_ERR "SiS SEND Switch CMD Return NACK - 85(PWR_CMD_FW_CTRL)\n");
+ return false;
+ }else if((tmpbuf[BUF_ACK_PLACE_L] != BUF_ACK_L) || (tmpbuf[BUF_ACK_PLACE_H] != BUF_ACK_H)){
+ printk(KERN_ERR "SiS SEND Switch CMD Return Unknow- 85(PWR_CMD_FW_CTRL)\n");
+ return false;
+ }
+
+ memset(tmpbuf, 0, sizeof(tmpbuf));
+
+ //Send 85 CMD - DISABLE_DIAGNOSIS_MODE
+ ret = sis_command_for_write(client, sizeof(sis817_cmd_disable_diagnosis), sis817_cmd_disable_diagnosis);
+ if(ret < 0){
+ printk(KERN_ERR "SiS SEND Switch CMD Faile - 85(DISABLE_DIAGNOSIS_MODE)\n");
+ return false;
+ }
+
+ ret = sis_command_for_read(client, sizeof(tmpbuf), tmpbuf);
+ if(ret < 0){
+ printk(KERN_ERR "SiS READ Switch CMD Faile - 85(DISABLE_DIAGNOSIS_MODE)\n");
+ return false;
+ }
+
+ if((tmpbuf[BUF_ACK_PLACE_L] == BUF_NACK_L) && (tmpbuf[BUF_ACK_PLACE_H] == BUF_NACK_H)){
+ printk(KERN_ERR "SiS SEND Switch CMD Return NACK - 85(DISABLE_DIAGNOSIS_MODE)\n");
+ return false;
+ }else if((tmpbuf[BUF_ACK_PLACE_L] != BUF_ACK_L) || (tmpbuf[BUF_ACK_PLACE_H] != BUF_ACK_H)){
+ printk(KERN_ERR "SiS SEND Switch CMD Return Unknow- 85(DISABLE_DIAGNOSIS_MODE)\n");
+ return false;
+ }
+
+ msleep(50);
+ return true;
+}
+
+/*
+ * Use this function get FW ID.
+ */
+bool sis_get_fw_id(struct i2c_client *client)
+{
+ int ret = 0;
+ uint8_t tmpbuf[MAX_BYTE] = {0};
+ uint8_t sis817_cmd_get_FW_ID[14] = {0x04, 0x00, 0x0c, 0x00, 0x09,
+ 0x00, 0x86, 0x00, 0x0c, 0xc0, 0x00, 0xa0, 0x04, 0x00};
+
+ sis817_cmd_get_FW_ID[BUF_CRC_PLACE] = (0xFF & cal_crc_with_cmd(sis817_cmd_get_FW_ID, 8, 13, 0x86));
+
+ if(!sis_switch_to_cmd_mode(client)){
+ printk(KERN_ERR "SiS Switch to CMD mode error.\n");
+ return false;
+ }
+
+ ret = sis_command_for_write(client, sizeof(sis817_cmd_get_FW_ID), sis817_cmd_get_FW_ID);
+ if(ret < 0){
+ printk(KERN_ERR "SiS SEND Check FW Ready CMD Faile - 86\n");
+ }
+
+ ret = sis_command_for_read(client, sizeof(tmpbuf), tmpbuf);
+ printk(KERN_INFO "SiS FW ID : ");
+ PrintBuffer(8, 12, tmpbuf);
+
+ if(!sis_switch_to_work_mode(client)){
+ printk(KERN_ERR "SiS Switch to Work mode error.\n");
+ return false;
+ }
+
+ if(ret < 0) return false;
+ return true;
+
+}
+
+/*
+ * Use this function check chip status.
+ *
+ * Return:Ture is chip on the work function, else is chip not ready.
+ */
+bool sis_check_fw_ready(struct i2c_client *client)
+{
+ int ret = 0;
+ int check_num = 10;
+ uint8_t tmpbuf[MAX_BYTE] = {0};
+ uint8_t sis817_cmd_check_ready[14] = {0x04, 0x00, 0x0c, 0x00, 0x09,
+ 0x00, 0x86, 0x00, 0x00, 0x00, 0x00, 0x50, 0x34, 0x00};
+
+
+ sis817_cmd_check_ready[BUF_CRC_PLACE] = (0xFF & cal_crc_with_cmd(sis817_cmd_check_ready, 8, 13, 0x86));
+
+
+ if(!sis_switch_to_cmd_mode(client)){
+ printk(KERN_ERR "SiS Switch to CMD mode error.\n");
+ return false;
+ }
+
+ while(check_num--){
+ printk(KERN_ERR "SiS Check FW Ready.\n");
+ ret = sis_command_for_write(client, sizeof(sis817_cmd_check_ready), sis817_cmd_check_ready);
+ if(ret < 0){
+ printk(KERN_ERR "SiS SEND Check FW Ready CMD Faile - 86\n");
+ }
+ ret = sis_command_for_read(client, sizeof(tmpbuf), tmpbuf);
+ if((tmpbuf[BUF_ACK_PLACE_L] == BUF_NACK_L) && (tmpbuf[BUF_ACK_PLACE_H] == BUF_NACK_H)){
+ printk(KERN_ERR "SiS SEND Check FW Ready CMD Return NACK\n");
+ }else if((tmpbuf[BUF_ACK_PLACE_L] != BUF_ACK_L) || (tmpbuf[BUF_ACK_PLACE_H] != BUF_ACK_H)){
+ printk(KERN_ERR "SiS SEND Check FW Ready CMD Return Unknow\n");
+ }else{
+ if(tmpbuf[9] == 1){
+ printk(KERN_ERR "SiS FW READY.\n");
+ break;
+ }
+ }
+ printk(KERN_ERR "SiS CHECK FW READY - Retry:%d.\n", (10-check_num));
+ msleep(50);
+ }
+
+ if(!sis_switch_to_work_mode(client)){
+ printk(KERN_ERR "SiS Switch to Work mode error.\n");
+ return false;
+ }
+
+ if(check_num == 0) return false;
+ return true;
+
+}
+
+/*
+ * Use this function to change chip power mode.
+ *
+ * mode:POWER_MODE_FWCTRL, power control by FW.
+ * POWER_MODE_ACTIVE, chip always work on time.
+ * POWER_MODE_SLEEP, chip on the sleep mode.
+ *
+ * Return:Ture is change power mode success.
+ */
+bool sis_change_fw_mode(struct i2c_client *client, enum SIS_817_POWER_MODE mode)
+{
+ int ret = -1;
+ uint8_t tmpbuf[MAX_BYTE] = {0};
+ uint8_t sis817_cmd_fwctrl[10] = {0x04, 0x00, 0x08, 0x00, 0x09, 0x00, 0x85, 0x3c, 0x50, 0x09};
+ uint8_t sis817_cmd_active[10] = {0x04, 0x00, 0x08, 0x00, 0x09, 0x00, 0x85, 0x0d, 0x51, 0x09};
+ uint8_t sis817_cmd_sleep[10] = {0x04, 0x00, 0x08, 0x00, 0x09, 0x00, 0x85, 0x5e, 0x52, 0x09};
+
+
+ switch(mode)
+ {
+ case POWER_MODE_FWCTRL:
+ ret = sis_command_for_write(client, sizeof(sis817_cmd_fwctrl), sis817_cmd_fwctrl);
+ break;
+ case POWER_MODE_ACTIVE:
+ ret = sis_command_for_write(client, sizeof(sis817_cmd_active), sis817_cmd_active);
+ break;
+ case POWER_MODE_SLEEP:
+ ret = sis_command_for_write(client, sizeof(sis817_cmd_sleep), sis817_cmd_sleep);
+ break;
+ default:
+ return false;
+ break;
+ }
+
+ if(ret < 0){
+ printk(KERN_ERR "SiS SEND Power CMD Faile - 85\n");
+ return false;
+ }
+
+ ret = sis_command_for_read(client, sizeof(tmpbuf), tmpbuf);
+ if(ret < 0){
+ printk(KERN_ERR "SiS READ Power CMD Faile - 85\n");
+ return false;
+ }
+
+ if((tmpbuf[BUF_ACK_PLACE_L] == BUF_NACK_L) && (tmpbuf[BUF_ACK_PLACE_H] == BUF_NACK_H)){
+ printk(KERN_ERR "SiS SEND Power CMD Return NACK - 85\n");
+ return false;
+ }else if((tmpbuf[BUF_ACK_PLACE_L] != BUF_ACK_L) || (tmpbuf[BUF_ACK_PLACE_H] != BUF_ACK_H)){
+ printk(KERN_ERR "SiS SEND Power CMD Return Unknow- 85\n");
+ return false;
+ }
+
+ msleep(100);
+
+ return true;
+}
+
+/*
+ * Use this function to get chip work status.
+ *
+ * Return:-1 is get firmware work status error.
+ * POWER_MODE_FWCTRL, power control by FW.
+ * POWER_MODE_ACTIVE, chip always work on time.
+ * POWER_MODE_SLEEP, chip on the sleep mode.
+ */
+enum SIS_817_POWER_MODE sis_get_fw_mode(struct i2c_client *client)
+{
+ int ret;
+ uint8_t tmpbuf[MAX_BYTE] = {0};
+ uint8_t sis817_cmd_check_power_mode[14] = {0x04, 0x00, 0x0c, 0x00,
+ 0x09, 0x00, 0x86, 0x00, 0x00, 0x00, 0x00, 0x50, 0x34, 0x00};
+
+ printk(KERN_INFO "SiS Get FW Mode.\n");
+ sis817_cmd_check_power_mode[BUF_CRC_PLACE] = (0xFF & cal_crc_with_cmd(sis817_cmd_check_power_mode, 8, 13, 0x86));
+
+ ret = sis_command_for_write(client, sizeof(sis817_cmd_check_power_mode), sis817_cmd_check_power_mode);
+ if(ret < 0){
+ printk(KERN_ERR "SiS SEND Get FW Mode CMD Faile - 86\n");
+ }else{
+ ret = sis_command_for_read(client, sizeof(tmpbuf), tmpbuf);
+ if(ret < 0){
+ printk(KERN_ERR "SiS READ Get FW Mode CMD Faile - 86\n");
+ }else{
+ if((tmpbuf[BUF_ACK_PLACE_L] == BUF_NACK_L) && (tmpbuf[BUF_ACK_PLACE_H] == BUF_NACK_H)){
+ printk(KERN_ERR "SiS SEND Get FW Mode CMD Return NACK\n");
+ }else if((tmpbuf[BUF_ACK_PLACE_L] != BUF_ACK_L) || (tmpbuf[BUF_ACK_PLACE_H] != BUF_ACK_H)){
+ printk(KERN_ERR "SiS SEND Get FW Mode CMD Return Unknow\n");
+ PrintBuffer(0, sizeof(tmpbuf), tmpbuf);
+ }
+ }
+ }
+
+ switch(tmpbuf[10])
+ {
+ case POWER_MODE_FWCTRL:
+ return POWER_MODE_FWCTRL;
+ case POWER_MODE_ACTIVE:
+ return POWER_MODE_ACTIVE;
+ case POWER_MODE_SLEEP:
+ return POWER_MODE_SLEEP;
+ default:
+ break;
+ }
+
+ return -1;
+}
+
+/*
+ * Use this function to reset chip.
+ */
+void sis_fw_softreset(struct i2c_client *client)
+{
+
+ int ret = 0;
+ uint8_t tmpbuf[MAX_BYTE] = {0};
+ uint8_t sis817_cmd_reset[8] = {0x04, 0x00, 0x06, 0x00, 0x09, 0x00, 0x82, 0x00};
+
+
+ sis817_cmd_reset[BUF_CRC_PLACE] = (0xFF & cal_crc(sis817_cmd_reset, 6, 6));
+
+ printk(KERN_ERR "SiS Software Reset.\n");
+ if(!sis_switch_to_cmd_mode(client)){
+ printk(KERN_ERR "SiS Switch to CMD mode error.\n");
+ return;
+ }
+
+ ret = sis_command_for_write(client, sizeof(sis817_cmd_reset), sis817_cmd_reset);
+ if(ret < 0){
+ printk(KERN_ERR "SiS SEND Reset CMD Faile - 82\n");
+ }
+ ret = sis_command_for_read(client, sizeof(tmpbuf), tmpbuf);
+ if((tmpbuf[BUF_ACK_PLACE_L] == BUF_NACK_L) && (tmpbuf[BUF_ACK_PLACE_H] == BUF_NACK_H)){
+ printk(KERN_ERR "SiS SEND Reset CMD Return NACK - 85(DISABLE_DIAGNOSIS_MODE)\n");
+ }else if((tmpbuf[BUF_ACK_PLACE_L] != BUF_ACK_L) || (tmpbuf[BUF_ACK_PLACE_H] != BUF_ACK_H)){
+ printk(KERN_ERR "SiS SEND Reset CMD Return Unknow- 85(DISABLE_DIAGNOSIS_MODE)\n");
+ }
+ msleep(2000);
+}
+
+
+#ifdef _STD_RW_IO
+#define BUFFER_SIZE MAX_BYTE
+static ssize_t sis_cdev_write( struct file *file, const char __user *buf, size_t count, loff_t *f_pos )
+{
+ int ret = 0;
+ char *kdata;
+ char cmd;
+
+ printk(KERN_INFO "sis_cdev_write.\n");
+
+ if (ts_bak == 0)
+ return -13;
+
+ ret = access_ok(VERIFY_WRITE, buf, BUFFER_SIZE);
+ if (!ret) {
+ printk(KERN_ERR "cannot access user space memory\n");
+ return -11;
+ }
+
+ kdata = kmalloc(BUFFER_SIZE, GFP_KERNEL);
+ if (kdata == 0)
+ return -12;
+
+ ret = copy_from_user(kdata, buf, BUFFER_SIZE);
+ if (ret) {
+ printk(KERN_ERR "copy_from_user fail\n");
+ kfree(kdata);
+ return -14;
+ }
+#if 0
+ PrintBuffer(0, count, kdata);
+#endif
+
+ cmd = kdata[6];
+
+ printk(KERN_INFO "io cmd=%02x\n", cmd);
+
+//Write & Read
+ ret = sis_command_for_write(ts_bak->client, count, kdata);
+ if (ret < 0) {
+ printk(KERN_ERR "i2c_transfer write error %d\n", ret);
+ kfree(kdata);
+ return -21;
+ }
+
+ if ( copy_to_user((char*) buf, kdata, BUFFER_SIZE ) )
+ {
+ printk(KERN_ERR "copy_to_user fail\n" );
+ ret = -19;
+ }
+
+ kfree( kdata );
+
+ return ret;
+}
+
+//for get system time
+static ssize_t sis_cdev_read( struct file *file, char __user *buf, size_t count, loff_t *f_pos )
+{
+ int ret = 0;
+ char *kdata;
+ char cmd;
+ int i;
+ printk(KERN_INFO "sis_cdev_read.\n");
+
+ if (ts_bak == 0)
+ return -13;
+
+ ret = access_ok(VERIFY_WRITE, buf, BUFFER_SIZE);
+ if (!ret) {
+ printk(KERN_ERR "cannot access user space memory\n");
+ return -11;
+ }
+
+ kdata = kmalloc(BUFFER_SIZE, GFP_KERNEL);
+ if (kdata == 0)
+ return -12;
+
+ ret = copy_from_user(kdata, buf, BUFFER_SIZE);
+ if (ret) {
+ printk(KERN_ERR "copy_from_user fail\n");
+ kfree(kdata);
+ return -14;
+ }
+#if 0
+ PrintBuffer(0, count, kdata);
+#endif
+ cmd = kdata[6];
+ //for making sure AP communicates with SiS driver
+ if(cmd == 0xa2)
+ {
+ kdata[0] = 5;
+ kdata[1] = 0;
+ kdata[3] = 'S';
+ kdata[4] = 'i';
+ kdata[5] = 'S';
+ if ( copy_to_user((char*) buf, kdata, BUFFER_SIZE ) )
+ {
+ printk(KERN_ERR "copy_to_user fail\n" );
+ kfree( kdata );
+ return -19;
+ }
+
+ kfree( kdata );
+ return 3;
+ }
+//Write & Read
+ ret = sis_command_for_read(ts_bak->client, MAX_BYTE, kdata);
+ if (ret < 0) {
+ printk(KERN_ERR "i2c_transfer read error %d\n", ret);
+ kfree(kdata);
+ return -21;
+ }
+
+ ret = kdata[0] | (kdata[1] << 8);
+
+/*
+ for ( i = 0; i < BUFFER_SIZE - 1; i++ ) {
+ kdata[i] = kdata[i+1];
+ }
+*/
+
+ printk(KERN_INFO "%d\n", ret);
+
+ for ( i = 0; i < ret && i < BUFFER_SIZE; i++ )
+ {
+ printk("%02x ", kdata[i]);
+ }
+
+ printk( "\n" );
+
+ if ( copy_to_user((char*) buf, kdata, BUFFER_SIZE ) )
+ {
+ printk(KERN_ERR "copy_to_user fail\n" );
+ ret = -19;
+ }
+
+ kfree( kdata );
+
+ return ret;
+}
+
+#undef BUFFER_SIZE
+
+static int sis_cdev_open(struct inode *inode, struct file *filp)
+{
+ printk(KERN_INFO "sis_cdev_open.\n");
+ if ( ts_bak == 0 )
+ return -13;
+
+ msleep(200);
+ if (ts_bak->use_irq)
+ {
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION (2, 6, 39) )
+ if ((ts_bak->desc->status & IRQ_DISABLED) == IRQ_STATUS_ENABLED)
+#else
+ if ((ts_bak->desc->irq_data.state_use_accessors & IRQD_IRQ_DISABLED) == IRQ_STATUS_ENABLED)
+#endif
+ {
+ disable_irq(ts_bak->client->irq);
+ }
+ else
+ {
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION (2, 6, 39) )
+ printk(KERN_INFO "sis_cdev_open: IRQ_STATUS: %x\n",(ts_bak->desc->status & IRQ_DISABLED));
+#else
+ printk(KERN_INFO "sis_cdev_open: IRQ_STATUS: %x\n",(ts_bak->desc->irq_data.state_use_accessors & IRQD_IRQ_DISABLED));
+#endif
+ }
+ }
+ hrtimer_cancel(&ts_bak->timer);
+
+ flush_workqueue(sis_wq); // only flush sis_wq
+
+ msleep(200);
+
+ return 0; /* success */
+}
+
+static int sis_cdev_release(struct inode *inode, struct file *filp)
+{
+ printk(KERN_INFO "sis_cdev_release.\n");
+ msleep(200);
+ if (ts_bak == 0)
+ return -13;
+
+ if (ts_bak->use_irq)
+ {
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION (2, 6, 39) )
+ if ((ts_bak->desc->status & IRQ_DISABLED) == IRQ_STATUS_DISABLED)
+#else
+ if ((ts_bak->desc->irq_data.state_use_accessors & IRQD_IRQ_DISABLED) == IRQ_STATUS_DISABLED)
+#endif
+ {
+ enable_irq(ts_bak->client->irq);
+ }
+ }
+ else
+ hrtimer_start(&ts_bak->timer, ktime_set(1, 0), HRTIMER_MODE_REL);
+
+ return 0;
+}
+
+static const struct file_operations sis_cdev_fops = {
+ .owner = THIS_MODULE,
+ .read = sis_cdev_read,
+ .write = sis_cdev_write,
+ .open = sis_cdev_open,
+ .release= sis_cdev_release,
+};
+
+static int sis_setup_chardev(struct sis_ts_data *ts)
+{
+
+ dev_t dev = MKDEV(sis_char_major, 0);
+ int alloc_ret = 0;
+ int cdev_err = 0;
+ int input_err = 0;
+ struct device *class_dev = NULL;
+ void *ptr_err;
+
+ printk("sis_setup_chardev.\n");
+
+ if (ts == NULL)
+ {
+ input_err = -ENOMEM;
+ goto error;
+ }
+ // dynamic allocate driver handle
+ alloc_ret = alloc_chrdev_region(&dev, 0, sis_char_devs_count, DEVICE_NAME);
+ if (alloc_ret)
+ goto error;
+
+ sis_char_major = MAJOR(dev);
+ cdev_init(&sis_char_cdev, &sis_cdev_fops);
+ sis_char_cdev.owner = THIS_MODULE;
+ cdev_err = cdev_add(&sis_char_cdev, MKDEV(sis_char_major, 0), sis_char_devs_count);
+
+ if (cdev_err)
+ goto error;
+
+ printk(KERN_INFO "%s driver(major %d) installed.\n", DEVICE_NAME, sis_char_major);
+
+ // register class
+ sis_char_class = class_create(THIS_MODULE, DEVICE_NAME);
+ if(IS_ERR(ptr_err = sis_char_class))
+ {
+ goto err2;
+ }
+
+ class_dev = device_create(sis_char_class, NULL, MKDEV(sis_char_major, 0), NULL, DEVICE_NAME);
+
+ if(IS_ERR(ptr_err = class_dev))
+ {
+ goto err;
+ }
+
+ return 0;
+error:
+ if (cdev_err == 0)
+ cdev_del(&sis_char_cdev);
+ if (alloc_ret == 0)
+ unregister_chrdev_region(MKDEV(sis_char_major, 0), sis_char_devs_count);
+ if(input_err != 0)
+ {
+ printk("sis_ts_bak error!\n");
+ }
+err:
+ device_destroy(sis_char_class, MKDEV(sis_char_major, 0));
+err2:
+ class_destroy(sis_char_class);
+ return -1;
+}
+#endif
+
+static int sis_ts_probe(
+ struct i2c_client *client, const struct i2c_device_id *id)
+{
+ int ret = 0;
+ struct sis_ts_data *ts = NULL;
+ struct sis_i2c_rmi_platform_data *pdata = NULL;
+
+ printk(KERN_INFO "sis_ts_probe\n");
+
+ TPInfo = kzalloc(sizeof(struct sisTP_driver_data), GFP_KERNEL);
+ if (TPInfo == NULL)
+ {
+ ret = -ENOMEM;
+ goto err_alloc_data_failed;
+ }
+
+ ts = kzalloc(sizeof(struct sis_ts_data), GFP_KERNEL);
+ if (ts == NULL)
+ {
+ ret = -ENOMEM;
+ goto err_alloc_data_failed;
+ }
+
+ ts_bak = ts;
+
+ mutex_init(&ts->mutex_wq);
+
+ //1. Init Work queue and necessary buffers
+ INIT_WORK(&ts->work, sis_ts_work_func);
+ ts->client = client;
+ i2c_set_clientdata(client, ts);
+ pdata = client->dev.platform_data;
+
+ if (pdata)
+ ts->power = pdata->power;
+ if (ts->power)
+ {
+ ret = ts->power(1);
+ if (ret < 0)
+ {
+ printk(KERN_ERR "sis_ts_probe power on failed\n");
+ goto err_power_failed;
+ }
+ }
+
+ //2. Allocate input device
+ ts->input_dev = input_allocate_device();
+ if (ts->input_dev == NULL)
+ {
+ ret = -ENOMEM;
+ printk(KERN_ERR "sis_ts_probe: Failed to allocate input device\n");
+ goto err_input_dev_alloc_failed;
+ }
+
+ //This input device name should be the same to IDC file name.
+ ts->input_dev->name = "sis_touch";//"SiS9200-i2c-touchscreen";
+
+ sis_get_fw_id(client);
+
+#ifdef CONFIG_FW_SUPPORT_POWERMODE
+ //sis_check_fw_ready(client);
+#endif
+
+ set_bit(EV_ABS, ts->input_dev->evbit);
+ set_bit(EV_KEY, ts->input_dev->evbit);
+ set_bit(ABS_MT_POSITION_X, ts->input_dev->absbit);
+ set_bit(ABS_MT_POSITION_Y, ts->input_dev->absbit);
+ set_bit(ABS_MT_TRACKING_ID, ts->input_dev->absbit);
+
+#ifdef _ANDROID_4
+ set_bit(INPUT_PROP_DIRECT, ts->input_dev->propbit);
+ set_bit(ABS_MT_PRESSURE, ts->input_dev->absbit);
+ set_bit(ABS_MT_TOUCH_MAJOR, ts->input_dev->absbit);
+ set_bit(ABS_MT_TOUCH_MINOR, ts->input_dev->absbit);
+ input_set_abs_params(ts->input_dev, ABS_MT_PRESSURE, 0, PRESSURE_MAX, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, AREA_LENGTH_LONGER, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MINOR, 0, AREA_LENGTH_SHORT, 0, 0);
+#else
+ set_bit(ABS_MT_TOUCH_MAJOR, ts->input_dev->absbit);
+ set_bit(ABS_MT_WIDTH_MAJOR, ts->input_dev->absbit);
+ set_bit(ABS_MT_WIDTH_MINOR, ts->input_dev->absbit);
+ input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, PRESSURE_MAX, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, AREA_LENGTH_LONGER, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MINOR, 0, AREA_LENGTH_SHORT, 0, 0);
+#endif
+
+ input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0, SIS_MAX_X, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0, SIS_MAX_Y, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_TRACKING_ID, 0, 15, 0, 0);
+
+ /* add for touch keys */
+ set_bit(KEY_COMPOSE, ts->input_dev->keybit);
+ set_bit(KEY_BACK, ts->input_dev->keybit);
+ set_bit(KEY_MENU, ts->input_dev->keybit);
+ set_bit(KEY_HOME, ts->input_dev->keybit);
+
+ //3. Register input device to core
+ ret = input_register_device(ts->input_dev);
+
+ if (ret)
+ {
+ printk(KERN_ERR "sis_ts_probe: Unable to register %s input device\n", ts->input_dev->name);
+ goto err_input_register_device_failed;
+ }
+
+ //4. irq or timer setup
+ ret = initial_irq();
+ if (ret < 0)
+ {
+
+ }
+ else
+ {
+ client->irq = gpio_to_irq(GPIO_IRQ);
+ ret = request_irq(client->irq, sis_ts_irq_handler, IRQF_TRIGGER_FALLING, client->name, ts);
+ if (ret == 0)
+ {
+ ts->use_irq = 1;
+ }
+ else
+ {
+ dev_err(&client->dev, "request_irq failed\n");
+ }
+ }
+
+ ts->desc = irq_to_desc(ts_bak->client->irq);
+
+ hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ ts->timer.function = sis_ts_timer_func;
+
+ if (!ts->use_irq)
+ {
+ hrtimer_start(&ts->timer, ktime_set(1, 0), HRTIMER_MODE_REL);
+ }
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ ts->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 1;
+ ts->early_suspend.suspend = sis_ts_early_suspend;
+ ts->early_suspend.resume = sis_ts_late_resume;
+ register_early_suspend(&ts->early_suspend);
+#endif
+ printk(KERN_INFO "sis_ts_probe: Start touchscreen %s in %s mode\n", ts->input_dev->name, ts->use_irq ? "interrupt" : "polling");
+
+ if (ts->use_irq)
+ {
+#ifdef _INT_MODE_1
+ printk(KERN_INFO "sis_ts_probe: interrupt case 1 mode\n");
+#else
+ printk(KERN_INFO "sis_ts_probe: interrupt case 2 mode\n");
+#endif
+ }
+
+#ifdef _STD_RW_IO
+ ret = sis_setup_chardev(ts);
+ if(ret)
+ {
+ printk( KERN_INFO"sis_setup_chardev fail\n");
+ }
+#endif
+
+ printk( KERN_INFO"sis SIS_SLAVE_ADDR: %d\n", SIS_SLAVE_ADDR);
+
+ return 0;
+
+err_input_register_device_failed:
+ input_free_device(ts->input_dev);
+
+err_input_dev_alloc_failed:
+err_power_failed:
+ kfree(ts);
+err_alloc_data_failed:
+ return ret;
+}
+
+static int sis_ts_remove(struct i2c_client *client)
+{
+ struct sis_ts_data *ts = i2c_get_clientdata(client);
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ unregister_early_suspend(&ts->early_suspend);
+#endif
+ if (ts->use_irq)
+ free_irq(client->irq, ts);
+ else
+ hrtimer_cancel(&ts->timer);
+ input_unregister_device(ts->input_dev);
+ kfree(ts);
+ return 0;
+}
+
+static int sis_ts_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ int ret = 0;
+ struct sis_ts_data *ts = i2c_get_clientdata(client);
+
+#ifdef CONFIG_FW_SUPPORT_POWERMODE
+ int retry = 5;
+#endif
+
+ TPInfo->pre_keybit_state = 0x0;
+
+ if (ts->use_irq)
+ {
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION (2, 6, 39) )
+ if ((ts->desc->status & IRQ_DISABLED) == IRQ_STATUS_ENABLED)
+#else
+ if ((ts->desc->irq_data.state_use_accessors & IRQD_IRQ_DISABLED) == IRQ_STATUS_ENABLED)
+#endif
+ {
+ disable_irq(client->irq);
+ }
+ }
+ else
+ hrtimer_cancel(&ts->timer);
+ flush_workqueue(sis_wq); // only flush sis_wq
+// flush_scheduled_work(); // flush all of workqueue in kernel
+// ret = cancel_work_sync(&ts->work); // only cancel one work(sis_ts_work_func),
+ // but there maybe are others in workqueue.
+/*
+ // For cancel_work_sync()
+ if (ret && ts->use_irq) //if work was pending disable-count is now 2
+ {
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION (2, 6, 39) )
+ if ((ts->desc->status & IRQ_DISABLED) == IRQ_STATUS_DISABLED)
+#else
+ if ((ts->desc->irq_data.state_use_accessors & IRQD_IRQ_DISABLED) == IRQ_STATUS_DISABLED)
+#endif
+ {
+ enable_irq(client->irq);
+ }
+ }
+*/
+
+#ifdef CONFIG_FW_SUPPORT_POWERMODE
+ while ((sis_get_fw_mode(client) != POWER_MODE_SLEEP))
+ {
+
+ if(sis_change_fw_mode(client, POWER_MODE_SLEEP)){
+ printk(KERN_ERR "sis_ts_suspend: change mode retry - %d\n", 5-retry);
+ }
+
+ if (retry == 0){
+ printk(KERN_ERR "sis_ts_suspend: change mode failed\n");
+ break;
+ }
+
+ retry--;
+ msleep(50);
+ }
+#endif
+
+
+#if 0
+ /* Turn off SiS Chip*/
+ /* TODO */
+ gpio_direction_output(TOUCH_RESET_PIN, 0);
+ printk(KERN_INFO "[MSI TOUCH] SiS Touch Reset Low\n");
+// msleep(5);
+ gpio_direction_output(TOUCH_POWER_PIN, 0);
+ printk(KERN_INFO "[MSI TOUCH] SiS Touch Power off\n");
+#endif
+
+ if (ts->power) {
+ ret = ts->power(0);
+ if (ret < 0)
+ printk(KERN_ERR "sis_ts_suspend power off failed\n");
+ }
+
+ return 0;
+}
+
+static int sis_ts_resume(struct i2c_client *client)
+{
+ int ret = 0;
+ struct sis_ts_data *ts = i2c_get_clientdata(client);
+
+#ifdef CONFIG_FW_SUPPORT_POWERMODE
+ int retry = 5;
+#endif
+
+ if (ts->power)
+ {
+ ret = ts->power(1);
+ if (ret < 0)
+ printk(KERN_ERR "sis_ts_resume power on failed\n");
+ }
+
+#if 0
+ /* Turn on SiS Chip*/
+ /* TODO */
+ gpio_direction_output(TOUCH_POWER_PIN, 1);
+ printk(KERN_INFO "[MSI TOUCH] SiS Touch Power on\n");
+ msleep(5);
+ gpio_direction_output(TOUCH_RESET_PIN, 1);
+ printk(KERN_INFO "[MSI TOUCH] SiS Touch Reset HI\n");
+ msleep(5);
+ gpio_direction_output(TOUCH_RESET_PIN, 0);
+ printk(KERN_INFO "[MSI TOUCH] SiS Touch Reset Low\n");
+ msleep(5);
+ gpio_direction_output(TOUCH_RESET_PIN, 1);
+ printk(KERN_INFO "[MSI TOUCH] SiS Touch Reset HI\n");
+#endif
+
+#ifdef CONFIG_FW_SUPPORT_POWERMODE
+ while ((sis_get_fw_mode(client) != POWER_MODE_FWCTRL))
+ {
+
+ if(sis_change_fw_mode(client, POWER_MODE_FWCTRL)){
+ printk(KERN_ERR "sis_ts_resume: change mode retry - %d\n", 5-retry);
+ }
+
+ if (retry == 0){
+ printk(KERN_ERR "sis_ts_resume: change mode failed\n");
+ break;
+ }
+
+ retry--;
+ msleep(50);
+ }
+#endif
+ //sis_fw_softreset(client);
+
+ if (ts->use_irq)
+ {
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION (2, 6, 39) )
+ if ((ts->desc->status & IRQ_DISABLED) == IRQ_STATUS_DISABLED)
+#else
+ if ((ts->desc->irq_data.state_use_accessors & IRQD_IRQ_DISABLED) == IRQ_STATUS_DISABLED)
+#endif
+ {
+ enable_irq(client->irq);
+ }
+ }
+ else
+ hrtimer_start(&ts->timer, ktime_set(1, 0), HRTIMER_MODE_REL);
+
+ return 0;
+}
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void sis_ts_early_suspend(struct early_suspend *h)
+{
+ struct sis_ts_data *ts;
+ TPInfo->pre_keybit_state = 0x0;
+ ts = container_of(h, struct sis_ts_data, early_suspend);
+ sis_ts_suspend(ts->client, PMSG_SUSPEND);
+}
+
+static void sis_ts_late_resume(struct early_suspend *h)
+{
+ struct sis_ts_data *ts;
+ ts = container_of(h, struct sis_ts_data, early_suspend);
+ sis_ts_resume(ts->client);
+}
+#endif
+
+static const struct i2c_device_id sis_ts_id[] = {
+ { SIS_I2C_NAME, 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, sis_ts_id);
+
+static struct i2c_driver sis_ts_driver = {
+ .probe = sis_ts_probe,
+ .remove = sis_ts_remove,
+#ifndef CONFIG_HAS_EARLYSUSPEND
+ .suspend = sis_ts_suspend,
+ .resume = sis_ts_resume,
+#endif
+#ifdef CONFIG_X86
+ .class = I2C_CLASS_HWMON,
+ .detect = sis_ts_detect,
+ .address_list = normal_i2c,
+#endif
+ .id_table = sis_ts_id,
+ .driver = {
+ .name = SIS_I2C_NAME,
+ },
+};
+
+static int __devinit sis_ts_init(void)
+{
+ printk( KERN_INFO "sis_ts_init\n" );
+ sis_wq = create_singlethread_workqueue("sis_wq");
+
+ if (!sis_wq)
+ return -ENOMEM;
+ return i2c_add_driver(&sis_ts_driver);
+}
+
+#ifdef CONFIG_X86
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int sis_ts_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ const char *type_name;
+ printk(KERN_INFO "sis_ts_detect\n");
+ type_name = "sis_i2c_ts";
+ strlcpy(info->type, type_name, I2C_NAME_SIZE);
+ return 0;
+}
+#endif
+
+static void __exit sis_ts_exit(void)
+{
+#ifdef _STD_RW_IO
+ dev_t dev;
+#endif
+
+ printk(KERN_INFO "sis_ts_exit\n");
+ i2c_del_driver(&sis_ts_driver);
+ if (sis_wq)
+ destroy_workqueue(sis_wq);
+
+#ifdef _STD_RW_IO
+ dev = MKDEV(sis_char_major, 0);
+ cdev_del(&sis_char_cdev);
+ unregister_chrdev_region(dev, sis_char_devs_count);
+ device_destroy(sis_char_class, MKDEV(sis_char_major, 0));
+ class_destroy(sis_char_class);
+#endif
+}
+
+module_init(sis_ts_init);
+module_exit(sis_ts_exit);
+MODULE_DESCRIPTION("SiS 9200 Family Touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/linux-3.18.1/drivers/input/touchscreen/sis_i2c.h b/linux-3.18.1/drivers/input/touchscreen/sis_i2c.h
new file mode 100644
index 0000000..1ace42a
--- /dev/null
+++ b/linux-3.18.1/drivers/input/touchscreen/sis_i2c.h
@@ -0,0 +1,229 @@
+/*
+ * include/linux/sis_i2c.h - platform data structure for SiS 9200 family
+ *
+ * Copyright (C) 2011 SiS, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Date: 2012/11/13
+ * Version: Android_v2.05.00-A639-1113
+ */
+#include <linux/version.h>
+
+#ifndef _LINUX_SIS_I2C_H
+#define _LINUX_SIS_I2C_H
+
+
+#define SIS_I2C_NAME "sis_i2c_ts"
+#define SIS_SLAVE_ADDR 0x5c
+#define TIMER_NS 10000000 //10ms
+#define MAX_FINGERS 10
+
+
+/* For Android 4.0 */
+/* Only for Linux kernel 2.6.34 and later */
+#define _ANDROID_4 // ON/OFF
+
+/* For standard R/W IO*/
+#define _STD_RW_IO // ON/OFF
+
+/* Interrupt setting and modes */
+#define _I2C_INT_ENABLE // ON/OFF
+#define GPIO_IRQ 133
+
+/* Enable if use interrupt case 1 mode. */
+/* Disable if use interrupt case 2 mode. */
+//#define _INT_MODE_1 // ON/OFF
+
+/* IRQ STATUS */
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION (2, 6, 39) )
+#define IRQ_STATUS_DISABLED 0x200
+#else
+#define IRQ_STATUS_DISABLED (1<<16)
+#endif
+#define IRQ_STATUS_ENABLED 0x0
+
+/* Resolution mode */
+// Constant value
+#define SIS_MAX_X 4095
+#define SIS_MAX_Y 4095
+
+#define ONE_BYTE 1
+#define FIVE_BYTE 5
+#define EIGHT_BYTE 8
+#define SIXTEEN_BYTE 16
+#define PACKET_BUFFER_SIZE 128
+
+#define SIS_CMD_NORMAL 0x0
+#define SIS_CMD_SOFTRESET 0x82
+#define SIS_CMD_RECALIBRATE 0x87
+#define SIS_CMD_POWERMODE 0x90
+#define MSK_TOUCHNUM 0x0f
+#define MSK_HAS_CRC 0x10
+#define MSK_DATAFMT 0xe0
+#define MSK_PSTATE 0x0f
+#define MSK_PID 0xf0
+#define RES_FMT 0x00
+#define FIX_FMT 0x40
+
+/* for new i2c format */
+#define TOUCHDOWN 0x3
+#define TOUCHUP 0x0
+#define MAX_BYTE 64
+#define PRESSURE_MAX 255
+
+#ifdef _ANDROID_4
+#define AREA_LENGTH_LONGER 5792 //Resolution diagonal
+#define AREA_LENGTH_SHORT 5792 // ((SIS_MAX_X^2) + (SIS_MAX_Y^2))^0.5
+#define AREA_UNIT (5792/32)
+#else
+#define AREA_LENGTH_LONGER 31
+#define AREA_LENGTH_SHORT 31
+#endif
+
+
+#define FORMAT_MODE 1
+
+#define MSK_NOBTN 0
+#define MSK_COMP 1
+#define MSK_BACK 2
+#define MSK_MENU 4
+#define MSK_HOME 8
+
+#define P_BYTECOUNT 0
+#define ALL_IN_ONE_PACKAGE 0x10
+#define IS_TOUCH(x) (x & 0x1)
+#define IS_HIDI2C(x) (x & 0x6)
+#define IS_AREA(x) ((x >> 4) & 0x1)
+#define IS_PRESSURE(x) ((x >> 5) & 0x1)
+#define IS_SCANTIME(x) ((x >> 6) & 0x1)
+//#define _DEBUG_PACKAGE // ON/OFF
+//#define _DEBUG_PACKAGE_WORKFUNC // ON/OFF
+//#define _DEBUG_REPORT // ON/OFF
+
+#ifdef OLD_FORMAT_AEGIS
+#define TOUCH_NUM 1
+#define BUTTON_KEY_COUNT 8
+#define BUTTON_TOUCH 0x05
+#define BUTTON_TOUCH_ONE_POINT 0x0A
+#define BUTTON_TOUCH_MULTI_TOUCH 0x0F
+#define MSK_BUTTON_POINT 0xf0
+#define BUTTON_TOUCH_SERIAL 0x70
+#define BUTTON_STATE (CMD_BASE + 1)
+
+#else
+//#define _CHECK_CRC // ON/OFF
+//#define _SUPPORT_BUTTON_TOUCH // ON/OFF
+#define TOUCH_FORMAT 0x1
+#define BUTTON_FORMAT 0x4
+#define HIDI2C_FORMAT 0x6
+#define P_REPORT_ID 2
+#define BUTTON_STATE 3
+#define BUTTON_KEY_COUNT 16
+#define BYTE_BYTECOUNT 2
+#define BYTE_COUNT 1
+#define BYTE_ReportID 1
+#define BYTE_CRC_HIDI2C 0
+#define BYTE_CRC_I2C 2
+#define BYTE_SCANTIME 2
+#define NO_TOUCH_BYTECOUNT 0x3
+#endif
+
+/* TODO */
+#define TOUCH_POWER_PIN 0
+#define TOUCH_RESET_PIN 1
+
+/* CMD Define */
+#define BUF_ACK_PLACE_L 4
+#define BUF_ACK_PLACE_H 5
+#define BUF_ACK_L 0xEF
+#define BUF_ACK_H 0xBE
+#define BUF_NACK_L 0xAD
+#define BUF_NACK_H 0xDE
+#define BUF_CRC_PLACE 7
+
+#endif /* _LINUX_SIS_I2C_H */
+
+enum SIS_817_POWER_MODE{
+ POWER_MODE_FWCTRL = 0x50,
+ POWER_MODE_ACTIVE = 0x51,
+ POWER_MODE_SLEEP = 0x52
+};
+
+struct sis_i2c_rmi_platform_data {
+ int (*power)(int on); /* Only valid in first array entry */
+};
+
+static const unsigned short crc16tab[256]= {
+ 0x0000,0x1021,0x2042,0x3063,0x4084,0x50a5,0x60c6,0x70e7,
+ 0x8108,0x9129,0xa14a,0xb16b,0xc18c,0xd1ad,0xe1ce,0xf1ef,
+ 0x1231,0x0210,0x3273,0x2252,0x52b5,0x4294,0x72f7,0x62d6,
+ 0x9339,0x8318,0xb37b,0xa35a,0xd3bd,0xc39c,0xf3ff,0xe3de,
+ 0x2462,0x3443,0x0420,0x1401,0x64e6,0x74c7,0x44a4,0x5485,
+ 0xa56a,0xb54b,0x8528,0x9509,0xe5ee,0xf5cf,0xc5ac,0xd58d,
+ 0x3653,0x2672,0x1611,0x0630,0x76d7,0x66f6,0x5695,0x46b4,
+ 0xb75b,0xa77a,0x9719,0x8738,0xf7df,0xe7fe,0xd79d,0xc7bc,
+ 0x48c4,0x58e5,0x6886,0x78a7,0x0840,0x1861,0x2802,0x3823,
+ 0xc9cc,0xd9ed,0xe98e,0xf9af,0x8948,0x9969,0xa90a,0xb92b,
+ 0x5af5,0x4ad4,0x7ab7,0x6a96,0x1a71,0x0a50,0x3a33,0x2a12,
+ 0xdbfd,0xcbdc,0xfbbf,0xeb9e,0x9b79,0x8b58,0xbb3b,0xab1a,
+ 0x6ca6,0x7c87,0x4ce4,0x5cc5,0x2c22,0x3c03,0x0c60,0x1c41,
+ 0xedae,0xfd8f,0xcdec,0xddcd,0xad2a,0xbd0b,0x8d68,0x9d49,
+ 0x7e97,0x6eb6,0x5ed5,0x4ef4,0x3e13,0x2e32,0x1e51,0x0e70,
+ 0xff9f,0xefbe,0xdfdd,0xcffc,0xbf1b,0xaf3a,0x9f59,0x8f78,
+ 0x9188,0x81a9,0xb1ca,0xa1eb,0xd10c,0xc12d,0xf14e,0xe16f,
+ 0x1080,0x00a1,0x30c2,0x20e3,0x5004,0x4025,0x7046,0x6067,
+ 0x83b9,0x9398,0xa3fb,0xb3da,0xc33d,0xd31c,0xe37f,0xf35e,
+ 0x02b1,0x1290,0x22f3,0x32d2,0x4235,0x5214,0x6277,0x7256,
+ 0xb5ea,0xa5cb,0x95a8,0x8589,0xf56e,0xe54f,0xd52c,0xc50d,
+ 0x34e2,0x24c3,0x14a0,0x0481,0x7466,0x6447,0x5424,0x4405,
+ 0xa7db,0xb7fa,0x8799,0x97b8,0xe75f,0xf77e,0xc71d,0xd73c,
+ 0x26d3,0x36f2,0x0691,0x16b0,0x6657,0x7676,0x4615,0x5634,
+ 0xd94c,0xc96d,0xf90e,0xe92f,0x99c8,0x89e9,0xb98a,0xa9ab,
+ 0x5844,0x4865,0x7806,0x6827,0x18c0,0x08e1,0x3882,0x28a3,
+ 0xcb7d,0xdb5c,0xeb3f,0xfb1e,0x8bf9,0x9bd8,0xabbb,0xbb9a,
+ 0x4a75,0x5a54,0x6a37,0x7a16,0x0af1,0x1ad0,0x2ab3,0x3a92,
+ 0xfd2e,0xed0f,0xdd6c,0xcd4d,0xbdaa,0xad8b,0x9de8,0x8dc9,
+ 0x7c26,0x6c07,0x5c64,0x4c45,0x3ca2,0x2c83,0x1ce0,0x0cc1,
+ 0xef1f,0xff3e,0xcf5d,0xdf7c,0xaf9b,0xbfba,0x8fd9,0x9ff8,
+ 0x6e17,0x7e36,0x4e55,0x5e74,0x2e93,0x3eb2,0x0ed1,0x1ef0
+};
+
+struct Point {
+ int id;
+ unsigned short x, y; // uint16_t ?
+ uint16_t Pressure;
+ uint16_t Width;
+ uint16_t Height;
+};
+
+struct sisTP_driver_data {
+ int id;
+ int fingers;
+ uint8_t pre_keybit_state;
+ struct Point pt[MAX_FINGERS];
+};
+
+struct sis_ts_data {
+ int (*power)(int on);
+ int use_irq;
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ struct hrtimer timer;
+ struct irq_desc *desc;
+ struct work_struct work;
+ struct mutex mutex_wq;
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ struct early_suspend early_suspend;
+#endif
+};
+
+static int sis_ts_suspend(struct i2c_client *client, pm_message_t mesg);
+static int sis_ts_resume(struct i2c_client *client);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists