| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150112135302.GB18351@hposo>
Date: Mon, 12 Jan 2015 14:53:02 +0100
From: Olivier Sobrie <olivier@...rie.be>
To: "Ahmed S. Darwish" <darwish.07@...il.com>
Cc: Oliver Hartkopp <socketcan@...tkopp.net>,
Wolfgang Grandegger <wg@...ndegger.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
"David S. Miller" <davem@...emloft.net>,
Paul Gortmaker <paul.gortmaker@...driver.com>,
Linux-CAN <linux-can@...r.kernel.org>,
netdev <netdev@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II
family
Hello,
On Sun, Jan 11, 2015 at 03:36:12PM -0500, Ahmed S. Darwish wrote:
> From: Ahmed S. Darwish <ahmed.darwish@...eo.com>
>
> CAN to USB interfaces sold by the Swedish manufacturer Kvaser are
> divided into two major families: 'Leaf', and 'UsbcanII'. From an
> Operating System perspective, the firmware of both families behave
> in a not too drastically different fashion.
>
> This patch adds support for the UsbcanII family of devices to the
> current Kvaser Leaf-only driver.
>
> CAN frames sending, receiving, and error handling paths has been
> tested using the dual-channel "Kvaser USBcan II HS/LS" dongle. It
> should also work nicely with other products in the same category.
>
> List of new devices supported by this driver update:
>
> - Kvaser USBcan II HS/HS
> - Kvaser USBcan II HS/LS
> - Kvaser USBcan Rugged ("USBcan Rev B")
> - Kvaser Memorator HS/HS
> - Kvaser Memorator HS/LS
> - Scania VCI2 (if you have the Kvaser logo on top)
>
> Signed-off-by: Ahmed S. Darwish <ahmed.darwish@...eo.com>
Just two small remarks below.
Thanks,
Olivier
> ---
> drivers/net/can/usb/Kconfig | 8 +-
> drivers/net/can/usb/kvaser_usb.c | 612 ++++++++++++++++++++++++++++++---------
> 2 files changed, 487 insertions(+), 133 deletions(-)
>
> ** V4 Changelog:
> - Use type-safe C methods instead of cpp macros
> - Further clarify the code and comments on error events channel arbitration
> - Remove defensive checks against non-existing families
> - Re-order methods to remove forward declarations
> - Smaller stuff spotted by earlier review (function prefexes, etc.)
>
> ** V3 Changelog:
> - Fix padding for the usbcan_msg_tx_acknowledge command
> - Remove kvaser_usb->max_channels and the MAX_NET_DEVICES macro
> - Rename commands to CMD_LEAF_xxx and CMD_USBCAN_xxx
> - Apply checkpatch.pl suggestions ('net/' comments, multi-line strings, etc.)
>
> ** V2 Changelog:
> - Update Kconfig entries
> - Use actual number of CAN channels (instead of max) where appropriate
> - Rebase over a new set of UsbcanII-independent driver fixes
>
> diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
> index a77db919..f6f5500 100644
> --- a/drivers/net/can/usb/Kconfig
> +++ b/drivers/net/can/usb/Kconfig
> @@ -25,7 +25,7 @@ config CAN_KVASER_USB
> tristate "Kvaser CAN/USB interface"
> ---help---
> This driver adds support for Kvaser CAN/USB devices like Kvaser
> - Leaf Light.
> + Leaf Light and Kvaser USBcan II.
>
> The driver provides support for the following devices:
> - Kvaser Leaf Light
> @@ -46,6 +46,12 @@ config CAN_KVASER_USB
> - Kvaser USBcan R
> - Kvaser Leaf Light v2
> - Kvaser Mini PCI Express HS
> + - Kvaser USBcan II HS/HS
> + - Kvaser USBcan II HS/LS
> + - Kvaser USBcan Rugged ("USBcan Rev B")
> + - Kvaser Memorator HS/HS
> + - Kvaser Memorator HS/LS
> + - Scania VCI2 (if you have the Kvaser logo on top)
>
> If unsure, say N.
>
> diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
> index 0eb870b..da47d17 100644
> --- a/drivers/net/can/usb/kvaser_usb.c
> +++ b/drivers/net/can/usb/kvaser_usb.c
> @@ -6,10 +6,12 @@
> * Parts of this driver are based on the following:
> * - Kvaser linux leaf driver (version 4.78)
> * - CAN driver for esd CAN-USB/2
> + * - Kvaser linux usbcanII driver (version 5.3)
> *
> * Copyright (C) 2002-2006 KVASER AB, Sweden. All rights reserved.
> * Copyright (C) 2010 Matthias Fuchs <matthias.fuchs@....eu>, esd gmbh
> * Copyright (C) 2012 Olivier Sobrie <olivier@...rie.be>
> + * Copyright (C) 2015 Valeo Corporation
> */
>
> #include <linux/completion.h>
> @@ -21,6 +23,15 @@
> #include <linux/can/dev.h>
> #include <linux/can/error.h>
>
> +/* Kvaser USB CAN dongles are divided into two major families:
> + * - Leaf: Based on Renesas M32C, running firmware labeled as 'filo'
> + * - UsbcanII: Based on Renesas M16C, running firmware labeled as 'helios'
> + */
> +enum kvaser_usb_family {
> + KVASER_LEAF,
> + KVASER_USBCAN,
> +};
> +
> #define MAX_TX_URBS 16
> #define MAX_RX_URBS 4
> #define START_TIMEOUT 1000 /* msecs */
> @@ -30,8 +41,9 @@
> #define RX_BUFFER_SIZE 3072
> #define CAN_USB_CLOCK 8000000
> #define MAX_NET_DEVICES 3
> +#define MAX_USBCAN_NET_DEVICES 2
>
> -/* Kvaser USB devices */
> +/* Leaf USB devices */
> #define KVASER_VENDOR_ID 0x0bfd
> #define USB_LEAF_DEVEL_PRODUCT_ID 10
> #define USB_LEAF_LITE_PRODUCT_ID 11
> @@ -56,6 +68,24 @@
> #define USB_LEAF_LITE_V2_PRODUCT_ID 288
> #define USB_MINI_PCIE_HS_PRODUCT_ID 289
>
> +static inline bool kvaser_is_leaf(const struct usb_device_id *id)
> +{
> + return id->idProduct >= USB_LEAF_DEVEL_PRODUCT_ID &&
> + id->idProduct <= USB_MINI_PCIE_HS_PRODUCT_ID;
> +}
> +
> +/* USBCANII devices */
> +#define USB_USBCAN_REVB_PRODUCT_ID 2
> +#define USB_VCI2_PRODUCT_ID 3
> +#define USB_USBCAN2_PRODUCT_ID 4
> +#define USB_MEMORATOR_PRODUCT_ID 5
> +
> +static inline bool kvaser_is_usbcan(const struct usb_device_id *id)
> +{
> + return id->idProduct >= USB_USBCAN_REVB_PRODUCT_ID &&
> + id->idProduct <= USB_MEMORATOR_PRODUCT_ID;
> +}
> +
> /* USB devices features */
> #define KVASER_HAS_SILENT_MODE BIT(0)
> #define KVASER_HAS_TXRX_ERRORS BIT(1)
> @@ -73,7 +103,7 @@
> #define MSG_FLAG_TX_ACK BIT(6)
> #define MSG_FLAG_TX_REQUEST BIT(7)
>
> -/* Can states */
> +/* Can states (M16C CxSTRH register) */
> #define M16C_STATE_BUS_RESET BIT(0)
> #define M16C_STATE_BUS_ERROR BIT(4)
> #define M16C_STATE_BUS_PASSIVE BIT(5)
> @@ -98,7 +128,13 @@
> #define CMD_START_CHIP_REPLY 27
> #define CMD_STOP_CHIP 28
> #define CMD_STOP_CHIP_REPLY 29
> -#define CMD_GET_CARD_INFO2 32
> +#define CMD_READ_CLOCK 30
> +#define CMD_READ_CLOCK_REPLY 31
These two defines are not used.
> +
> +#define CMD_LEAF_GET_CARD_INFO2 32
> +#define CMD_USBCAN_RESET_CLOCK 32
> +#define CMD_USBCAN_CLOCK_OVERFLOW_EVENT 33
> +
> #define CMD_GET_CARD_INFO 34
> #define CMD_GET_CARD_INFO_REPLY 35
> #define CMD_GET_SOFTWARE_INFO 38
> @@ -108,8 +144,9 @@
> #define CMD_RESET_ERROR_COUNTER 49
> #define CMD_TX_ACKNOWLEDGE 50
> #define CMD_CAN_ERROR_EVENT 51
> -#define CMD_USB_THROTTLE 77
> -#define CMD_LOG_MESSAGE 106
> +
> +#define CMD_LEAF_USB_THROTTLE 77
> +#define CMD_LEAF_LOG_MESSAGE 106
>
> /* error factors */
> #define M16C_EF_ACKE BIT(0)
> @@ -121,6 +158,14 @@
> #define M16C_EF_RCVE BIT(6)
> #define M16C_EF_TRE BIT(7)
>
> +/* Only Leaf-based devices can report M16C error factors,
> + * thus define our own error status flags for USBCANII
> + */
> +#define USBCAN_ERROR_STATE_NONE 0
> +#define USBCAN_ERROR_STATE_TX_ERROR BIT(0)
> +#define USBCAN_ERROR_STATE_RX_ERROR BIT(1)
> +#define USBCAN_ERROR_STATE_BUSERROR BIT(2)
> +
> /* bittiming parameters */
> #define KVASER_USB_TSEG1_MIN 1
> #define KVASER_USB_TSEG1_MAX 16
> @@ -137,7 +182,7 @@
> #define KVASER_CTRL_MODE_SELFRECEPTION 3
> #define KVASER_CTRL_MODE_OFF 4
>
> -/* log message */
> +/* Extended CAN identifier flag */
> #define KVASER_EXTENDED_FRAME BIT(31)
>
> struct kvaser_msg_simple {
> @@ -148,30 +193,55 @@ struct kvaser_msg_simple {
> struct kvaser_msg_cardinfo {
> u8 tid;
> u8 nchannels;
> - __le32 serial_number;
> - __le32 padding;
> + union {
> + struct {
> + __le32 serial_number;
> + __le32 padding;
> + } __packed leaf0;
> + struct {
> + __le32 serial_number_low;
> + __le32 serial_number_high;
> + } __packed usbcan0;
> + } __packed;
> __le32 clock_resolution;
> __le32 mfgdate;
> u8 ean[8];
> u8 hw_revision;
> - u8 usb_hs_mode;
> - __le16 padding2;
> + union {
> + struct {
> + u8 usb_hs_mode;
> + } __packed leaf1;
> + struct {
> + u8 padding;
> + } __packed usbcan1;
> + } __packed;
> + __le16 padding;
> } __packed;
>
> struct kvaser_msg_cardinfo2 {
> u8 tid;
> - u8 channel;
> + u8 reserved;
> u8 pcb_id[24];
> __le32 oem_unlock_code;
> } __packed;
>
> -struct kvaser_msg_softinfo {
> +struct leaf_msg_softinfo {
> u8 tid;
> - u8 channel;
> + u8 padding0;
> __le32 sw_options;
> __le32 fw_version;
> __le16 max_outstanding_tx;
> - __le16 padding[9];
> + __le16 padding1[9];
> +} __packed;
> +
> +struct usbcan_msg_softinfo {
> + u8 tid;
> + u8 fw_name[5];
> + __le16 max_outstanding_tx;
> + u8 padding[6];
> + __le32 fw_version;
> + __le16 checksum;
> + __le16 sw_options;
> } __packed;
>
> struct kvaser_msg_busparams {
> @@ -188,36 +258,86 @@ struct kvaser_msg_tx_can {
> u8 channel;
> u8 tid;
> u8 msg[14];
> - u8 padding;
> - u8 flags;
> + union {
> + struct {
> + u8 padding;
> + u8 flags;
> + } __packed leaf;
> + struct {
> + u8 flags;
> + u8 padding;
> + } __packed usbcan;
> + } __packed;
> +} __packed;
> +
> +struct kvaser_msg_rx_can_header {
> + u8 channel;
> + u8 flag;
> } __packed;
>
> -struct kvaser_msg_rx_can {
> +struct leaf_msg_rx_can {
> u8 channel;
> u8 flag;
> +
> __le16 time[3];
> u8 msg[14];
> } __packed;
>
> -struct kvaser_msg_chip_state_event {
> +struct usbcan_msg_rx_can {
> + u8 channel;
> + u8 flag;
> +
> + u8 msg[14];
> + __le16 time;
> +} __packed;
> +
> +struct leaf_msg_chip_state_event {
> u8 tid;
> u8 channel;
> +
> __le16 time[3];
> u8 tx_errors_count;
> u8 rx_errors_count;
> +
> u8 status;
> u8 padding[3];
> } __packed;
>
> -struct kvaser_msg_tx_acknowledge {
> +struct usbcan_msg_chip_state_event {
> + u8 tid;
> + u8 channel;
> +
> + u8 tx_errors_count;
> + u8 rx_errors_count;
> + __le16 time;
> +
> + u8 status;
> + u8 padding[3];
> +} __packed;
> +
> +struct kvaser_msg_tx_acknowledge_header {
> + u8 channel;
> + u8 tid;
> +};
Is this struct really needed? Can't you simply use
leaf_msg_tx_acknowledge or usbcan_msg_tx_acknowledge
structures to read the header.
Same for kvaser_msg_rx_can_header.
> +
> +struct leaf_msg_tx_acknowledge {
> u8 channel;
> u8 tid;
> +
> __le16 time[3];
> u8 flags;
> u8 time_offset;
> } __packed;
>
> -struct kvaser_msg_error_event {
> +struct usbcan_msg_tx_acknowledge {
> + u8 channel;
> + u8 tid;
> +
> + __le16 time;
> + __le16 padding;
> +} __packed;
> +
> +struct leaf_msg_error_event {
> u8 tid;
> u8 flags;
> __le16 time[3];
> @@ -229,6 +349,18 @@ struct kvaser_msg_error_event {
> u8 error_factor;
> } __packed;
>
> +struct usbcan_msg_error_event {
> + u8 tid;
> + u8 padding;
> + u8 tx_errors_count_ch0;
> + u8 rx_errors_count_ch0;
> + u8 tx_errors_count_ch1;
> + u8 rx_errors_count_ch1;
> + u8 status_ch0;
> + u8 status_ch1;
> + __le16 time;
> +} __packed;
> +
> struct kvaser_msg_ctrl_mode {
> u8 tid;
> u8 channel;
> @@ -243,7 +375,7 @@ struct kvaser_msg_flush_queue {
> u8 padding[3];
> } __packed;
>
> -struct kvaser_msg_log_message {
> +struct leaf_msg_log_message {
> u8 channel;
> u8 flags;
> __le16 time[3];
> @@ -260,19 +392,57 @@ struct kvaser_msg {
> struct kvaser_msg_simple simple;
> struct kvaser_msg_cardinfo cardinfo;
> struct kvaser_msg_cardinfo2 cardinfo2;
> - struct kvaser_msg_softinfo softinfo;
> struct kvaser_msg_busparams busparams;
> +
> + struct kvaser_msg_rx_can_header rx_can_header;
> + struct kvaser_msg_tx_acknowledge_header tx_acknowledge_header;
> +
> + union {
> + struct leaf_msg_softinfo softinfo;
> + struct leaf_msg_rx_can rx_can;
> + struct leaf_msg_chip_state_event chip_state_event;
> + struct leaf_msg_tx_acknowledge tx_acknowledge;
> + struct leaf_msg_error_event error_event;
> + struct leaf_msg_log_message log_message;
> + } __packed leaf;
> +
> + union {
> + struct usbcan_msg_softinfo softinfo;
> + struct usbcan_msg_rx_can rx_can;
> + struct usbcan_msg_chip_state_event chip_state_event;
> + struct usbcan_msg_tx_acknowledge tx_acknowledge;
> + struct usbcan_msg_error_event error_event;
> + } __packed usbcan;
> +
> struct kvaser_msg_tx_can tx_can;
> - struct kvaser_msg_rx_can rx_can;
> - struct kvaser_msg_chip_state_event chip_state_event;
> - struct kvaser_msg_tx_acknowledge tx_acknowledge;
> - struct kvaser_msg_error_event error_event;
> struct kvaser_msg_ctrl_mode ctrl_mode;
> struct kvaser_msg_flush_queue flush_queue;
> - struct kvaser_msg_log_message log_message;
> } u;
> } __packed;
>
> +/* Summary of a kvaser error event, for a unified Leaf/Usbcan error
> + * handling. Some discrepancies between the two families exist:
> + *
> + * - USBCAN firmware does not report M16C "error factors"
> + * - USBCAN controllers has difficulties reporting if the raised error
> + * event is for ch0 or ch1. They leave such arbitration to the OS
> + * driver by letting it compare error counters with previous values
> + * and decide the error event's channel. Thus for USBCAN, the channel
> + * field is only advisory.
> + */
> +struct kvaser_error_summary {
> + u8 channel, status, txerr, rxerr;
> + union {
> + struct {
> + u8 error_factor;
> + } leaf;
> + struct {
> + u8 other_ch_status;
> + u8 error_state;
> + } usbcan;
> + };
> +};
> +
> struct kvaser_usb_tx_urb_context {
> struct kvaser_usb_net_priv *priv;
> u32 echo_index;
> @@ -288,6 +458,7 @@ struct kvaser_usb {
>
> u32 fw_version;
> unsigned int nchannels;
> + enum kvaser_usb_family family;
>
> bool rxinitdone;
> void *rxbuf[MAX_RX_URBS];
> @@ -311,6 +482,7 @@ struct kvaser_usb_net_priv {
> };
>
> static const struct usb_device_id kvaser_usb_table[] = {
> + /* Leaf family IDs */
> { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_DEVEL_PRODUCT_ID) },
> { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_PRODUCT_ID) },
> { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_PRODUCT_ID),
> @@ -360,6 +532,17 @@ static const struct usb_device_id kvaser_usb_table[] = {
> .driver_info = KVASER_HAS_TXRX_ERRORS },
> { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_V2_PRODUCT_ID) },
> { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_HS_PRODUCT_ID) },
> +
> + /* USBCANII family IDs */
> + { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN2_PRODUCT_ID),
> + .driver_info = KVASER_HAS_TXRX_ERRORS },
> + { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_REVB_PRODUCT_ID),
> + .driver_info = KVASER_HAS_TXRX_ERRORS },
> + { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMORATOR_PRODUCT_ID),
> + .driver_info = KVASER_HAS_TXRX_ERRORS },
> + { USB_DEVICE(KVASER_VENDOR_ID, USB_VCI2_PRODUCT_ID),
> + .driver_info = KVASER_HAS_TXRX_ERRORS },
> +
> { }
> };
> MODULE_DEVICE_TABLE(usb, kvaser_usb_table);
> @@ -463,7 +646,14 @@ static int kvaser_usb_get_software_info(struct kvaser_usb *dev)
> if (err)
> return err;
>
> - dev->fw_version = le32_to_cpu(msg.u.softinfo.fw_version);
> + switch (dev->family) {
> + case KVASER_LEAF:
> + dev->fw_version = le32_to_cpu(msg.u.leaf.softinfo.fw_version);
> + break;
> + case KVASER_USBCAN:
> + dev->fw_version = le32_to_cpu(msg.u.usbcan.softinfo.fw_version);
> + break;
> + }
>
> return 0;
> }
> @@ -482,7 +672,9 @@ static int kvaser_usb_get_card_info(struct kvaser_usb *dev)
> return err;
>
> dev->nchannels = msg.u.cardinfo.nchannels;
> - if (dev->nchannels > MAX_NET_DEVICES)
> + if ((dev->nchannels > MAX_NET_DEVICES) ||
> + (dev->family == KVASER_USBCAN &&
> + dev->nchannels > MAX_USBCAN_NET_DEVICES))
> return -EINVAL;
>
> return 0;
> @@ -496,8 +688,10 @@ static void kvaser_usb_tx_acknowledge(const struct kvaser_usb *dev,
> struct kvaser_usb_net_priv *priv;
> struct sk_buff *skb;
> struct can_frame *cf;
> - u8 channel = msg->u.tx_acknowledge.channel;
> - u8 tid = msg->u.tx_acknowledge.tid;
> + u8 channel, tid;
> +
> + channel = msg->u.tx_acknowledge_header.channel;
> + tid = msg->u.tx_acknowledge_header.tid;
>
> if (channel >= dev->nchannels) {
> dev_err(dev->udev->dev.parent,
> @@ -616,53 +810,24 @@ static void kvaser_usb_unlink_tx_urbs(struct kvaser_usb_net_priv *priv)
> }
>
> static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
> - const struct kvaser_msg *msg)
> + struct kvaser_error_summary *es)
> {
> struct can_frame *cf;
> struct sk_buff *skb;
> struct net_device_stats *stats;
> struct kvaser_usb_net_priv *priv;
> unsigned int new_state;
> - u8 channel, status, txerr, rxerr, error_factor;
> -
> - switch (msg->id) {
> - case CMD_CAN_ERROR_EVENT:
> - channel = msg->u.error_event.channel;
> - status = msg->u.error_event.status;
> - txerr = msg->u.error_event.tx_errors_count;
> - rxerr = msg->u.error_event.rx_errors_count;
> - error_factor = msg->u.error_event.error_factor;
> - break;
> - case CMD_LOG_MESSAGE:
> - channel = msg->u.log_message.channel;
> - status = msg->u.log_message.data[0];
> - txerr = msg->u.log_message.data[2];
> - rxerr = msg->u.log_message.data[3];
> - error_factor = msg->u.log_message.data[1];
> - break;
> - case CMD_CHIP_STATE_EVENT:
> - channel = msg->u.chip_state_event.channel;
> - status = msg->u.chip_state_event.status;
> - txerr = msg->u.chip_state_event.tx_errors_count;
> - rxerr = msg->u.chip_state_event.rx_errors_count;
> - error_factor = 0;
> - break;
> - default:
> - dev_err(dev->udev->dev.parent, "Invalid msg id (%d)\n",
> - msg->id);
> - return;
> - }
>
> - if (channel >= dev->nchannels) {
> + if (es->channel >= dev->nchannels) {
> dev_err(dev->udev->dev.parent,
> - "Invalid channel number (%d)\n", channel);
> + "Invalid channel number (%d)\n", es->channel);
> return;
> }
>
> - priv = dev->nets[channel];
> + priv = dev->nets[es->channel];
> stats = &priv->netdev->stats;
>
> - if (status & M16C_STATE_BUS_RESET) {
> + if (es->status & M16C_STATE_BUS_RESET) {
> kvaser_usb_unlink_tx_urbs(priv);
> return;
> }
> @@ -675,9 +840,9 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
>
> new_state = priv->can.state;
>
> - netdev_dbg(priv->netdev, "Error status: 0x%02x\n", status);
> + netdev_dbg(priv->netdev, "Error status: 0x%02x\n", es->status);
>
> - if (status & M16C_STATE_BUS_OFF) {
> + if (es->status & M16C_STATE_BUS_OFF) {
> cf->can_id |= CAN_ERR_BUSOFF;
>
> priv->can.can_stats.bus_off++;
> @@ -687,12 +852,12 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
> netif_carrier_off(priv->netdev);
>
> new_state = CAN_STATE_BUS_OFF;
> - } else if (status & M16C_STATE_BUS_PASSIVE) {
> + } else if (es->status & M16C_STATE_BUS_PASSIVE) {
> if (priv->can.state != CAN_STATE_ERROR_PASSIVE) {
> cf->can_id |= CAN_ERR_CRTL;
>
> - if (txerr || rxerr)
> - cf->data[1] = (txerr > rxerr)
> + if (es->txerr || es->rxerr)
> + cf->data[1] = (es->txerr > es->rxerr)
> ? CAN_ERR_CRTL_TX_PASSIVE
> : CAN_ERR_CRTL_RX_PASSIVE;
> else
> @@ -703,13 +868,11 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
> }
>
> new_state = CAN_STATE_ERROR_PASSIVE;
> - }
> -
> - if (status == M16C_STATE_BUS_ERROR) {
> + } else if (es->status & M16C_STATE_BUS_ERROR) {
> if ((priv->can.state < CAN_STATE_ERROR_WARNING) &&
> - ((txerr >= 96) || (rxerr >= 96))) {
> + ((es->txerr >= 96) || (es->rxerr >= 96))) {
> cf->can_id |= CAN_ERR_CRTL;
> - cf->data[1] = (txerr > rxerr)
> + cf->data[1] = (es->txerr > es->rxerr)
> ? CAN_ERR_CRTL_TX_WARNING
> : CAN_ERR_CRTL_RX_WARNING;
>
> @@ -723,7 +886,7 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
> }
> }
>
> - if (!status) {
> + if (!es->status) {
> cf->can_id |= CAN_ERR_PROT;
> cf->data[2] = CAN_ERR_PROT_ACTIVE;
>
> @@ -739,34 +902,48 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
> priv->can.can_stats.restarts++;
> }
>
> - if (error_factor) {
> - priv->can.can_stats.bus_error++;
> - stats->rx_errors++;
> -
> - cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT;
> -
> - if (error_factor & M16C_EF_ACKE)
> - cf->data[3] |= (CAN_ERR_PROT_LOC_ACK);
> - if (error_factor & M16C_EF_CRCE)
> - cf->data[3] |= (CAN_ERR_PROT_LOC_CRC_SEQ |
> - CAN_ERR_PROT_LOC_CRC_DEL);
> - if (error_factor & M16C_EF_FORME)
> - cf->data[2] |= CAN_ERR_PROT_FORM;
> - if (error_factor & M16C_EF_STFE)
> - cf->data[2] |= CAN_ERR_PROT_STUFF;
> - if (error_factor & M16C_EF_BITE0)
> - cf->data[2] |= CAN_ERR_PROT_BIT0;
> - if (error_factor & M16C_EF_BITE1)
> - cf->data[2] |= CAN_ERR_PROT_BIT1;
> - if (error_factor & M16C_EF_TRE)
> - cf->data[2] |= CAN_ERR_PROT_TX;
> + switch (dev->family) {
> + case KVASER_LEAF:
> + if (es->leaf.error_factor) {
> + priv->can.can_stats.bus_error++;
> + stats->rx_errors++;
> +
> + cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT;
> +
> + if (es->leaf.error_factor & M16C_EF_ACKE)
> + cf->data[3] |= (CAN_ERR_PROT_LOC_ACK);
> + if (es->leaf.error_factor & M16C_EF_CRCE)
> + cf->data[3] |= (CAN_ERR_PROT_LOC_CRC_SEQ |
> + CAN_ERR_PROT_LOC_CRC_DEL);
> + if (es->leaf.error_factor & M16C_EF_FORME)
> + cf->data[2] |= CAN_ERR_PROT_FORM;
> + if (es->leaf.error_factor & M16C_EF_STFE)
> + cf->data[2] |= CAN_ERR_PROT_STUFF;
> + if (es->leaf.error_factor & M16C_EF_BITE0)
> + cf->data[2] |= CAN_ERR_PROT_BIT0;
> + if (es->leaf.error_factor & M16C_EF_BITE1)
> + cf->data[2] |= CAN_ERR_PROT_BIT1;
> + if (es->leaf.error_factor & M16C_EF_TRE)
> + cf->data[2] |= CAN_ERR_PROT_TX;
> + }
> + break;
> + case KVASER_USBCAN:
> + if (es->usbcan.error_state & USBCAN_ERROR_STATE_TX_ERROR)
> + stats->tx_errors++;
> + if (es->usbcan.error_state & USBCAN_ERROR_STATE_RX_ERROR)
> + stats->rx_errors++;
> + if (es->usbcan.error_state & USBCAN_ERROR_STATE_BUSERROR) {
> + priv->can.can_stats.bus_error++;
> + cf->can_id |= CAN_ERR_BUSERROR;
> + }
> + break;
> }
>
> - cf->data[6] = txerr;
> - cf->data[7] = rxerr;
> + cf->data[6] = es->txerr;
> + cf->data[7] = es->rxerr;
>
> - priv->bec.txerr = txerr;
> - priv->bec.rxerr = rxerr;
> + priv->bec.txerr = es->txerr;
> + priv->bec.rxerr = es->rxerr;
>
> priv->can.state = new_state;
>
> @@ -775,6 +952,124 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
> netif_rx(skb);
> }
>
> +/* For USBCAN, report error to userspace iff the channels's errors counter
> + * has increased, or we're the only channel seeing a bus error state.
> + */
> +static void kvaser_usbcan_conditionally_rx_error(const struct kvaser_usb *dev,
> + struct kvaser_error_summary *es)
> +{
> + struct kvaser_usb_net_priv *priv;
> + int channel;
> + bool report_error;
> +
> + channel = es->channel;
> + if (channel >= dev->nchannels) {
> + dev_err(dev->udev->dev.parent,
> + "Invalid channel number (%d)\n", channel);
> + return;
> + }
> +
> + priv = dev->nets[channel];
> + report_error = false;
> +
> + if (es->txerr > priv->bec.txerr) {
> + es->usbcan.error_state |= USBCAN_ERROR_STATE_TX_ERROR;
> + report_error = true;
> + }
> + if (es->rxerr > priv->bec.rxerr) {
> + es->usbcan.error_state |= USBCAN_ERROR_STATE_RX_ERROR;
> + report_error = true;
> + }
> + if ((es->status & M16C_STATE_BUS_ERROR) &&
> + !(es->usbcan.other_ch_status & M16C_STATE_BUS_ERROR)) {
> + es->usbcan.error_state |= USBCAN_ERROR_STATE_BUSERROR;
> + report_error = true;
> + }
> +
> + if (report_error)
> + kvaser_usb_rx_error(dev, es);
> +}
> +
> +static void kvaser_usbcan_rx_error(const struct kvaser_usb *dev,
> + const struct kvaser_msg *msg)
> +{
> + struct kvaser_error_summary es = { };
> +
> + switch (msg->id) {
> + /* Sometimes errors are sent as unsolicited chip state events */
> + case CMD_CHIP_STATE_EVENT:
> + es.channel = msg->u.usbcan.chip_state_event.channel;
> + es.status = msg->u.usbcan.chip_state_event.status;
> + es.txerr = msg->u.usbcan.chip_state_event.tx_errors_count;
> + es.rxerr = msg->u.usbcan.chip_state_event.rx_errors_count;
> + kvaser_usbcan_conditionally_rx_error(dev, &es);
> + break;
> +
> + case CMD_CAN_ERROR_EVENT:
> + es.channel = 0;
> + es.status = msg->u.usbcan.error_event.status_ch0;
> + es.txerr = msg->u.usbcan.error_event.tx_errors_count_ch0;
> + es.rxerr = msg->u.usbcan.error_event.rx_errors_count_ch0;
> + es.usbcan.other_ch_status =
> + msg->u.usbcan.error_event.status_ch1;
> + kvaser_usbcan_conditionally_rx_error(dev, &es);
> +
> + /* The USBCAN firmware does not support more than 2 channels.
> + * Now that ch0 was checked, check if ch1 has any errors.
> + */
> + if (dev->nchannels == MAX_USBCAN_NET_DEVICES) {
> + es.channel = 1;
> + es.status = msg->u.usbcan.error_event.status_ch1;
> + es.txerr = msg->u.usbcan.error_event.tx_errors_count_ch1;
> + es.rxerr = msg->u.usbcan.error_event.rx_errors_count_ch1;
> + es.usbcan.other_ch_status =
> + msg->u.usbcan.error_event.status_ch0;
> + kvaser_usbcan_conditionally_rx_error(dev, &es);
> + }
> + break;
> +
> + default:
> + dev_err(dev->udev->dev.parent, "Invalid msg id (%d)\n",
> + msg->id);
> + }
> +}
> +
> +static void kvaser_leaf_rx_error(const struct kvaser_usb *dev,
> + const struct kvaser_msg *msg)
> +{
> + struct kvaser_error_summary es = { };
> +
> + switch (msg->id) {
> + case CMD_CAN_ERROR_EVENT:
> + es.channel = msg->u.leaf.error_event.channel;
> + es.status = msg->u.leaf.error_event.status;
> + es.txerr = msg->u.leaf.error_event.tx_errors_count;
> + es.rxerr = msg->u.leaf.error_event.rx_errors_count;
> + es.leaf.error_factor = msg->u.leaf.error_event.error_factor;
> + break;
> + case CMD_LEAF_LOG_MESSAGE:
> + es.channel = msg->u.leaf.log_message.channel;
> + es.status = msg->u.leaf.log_message.data[0];
> + es.txerr = msg->u.leaf.log_message.data[2];
> + es.rxerr = msg->u.leaf.log_message.data[3];
> + es.leaf.error_factor = msg->u.leaf.log_message.data[1];
> + break;
> + case CMD_CHIP_STATE_EVENT:
> + es.channel = msg->u.leaf.chip_state_event.channel;
> + es.status = msg->u.leaf.chip_state_event.status;
> + es.txerr = msg->u.leaf.chip_state_event.tx_errors_count;
> + es.rxerr = msg->u.leaf.chip_state_event.rx_errors_count;
> + es.leaf.error_factor = 0;
> + break;
> + default:
> + dev_err(dev->udev->dev.parent, "Invalid msg id (%d)\n",
> + msg->id);
> + return;
> + }
> +
> + kvaser_usb_rx_error(dev, &es);
> +}
> +
> static void kvaser_usb_rx_can_err(const struct kvaser_usb_net_priv *priv,
> const struct kvaser_msg *msg)
> {
> @@ -782,16 +1077,16 @@ static void kvaser_usb_rx_can_err(const struct kvaser_usb_net_priv *priv,
> struct sk_buff *skb;
> struct net_device_stats *stats = &priv->netdev->stats;
>
> - if (msg->u.rx_can.flag & (MSG_FLAG_ERROR_FRAME |
> + if (msg->u.rx_can_header.flag & (MSG_FLAG_ERROR_FRAME |
> MSG_FLAG_NERR)) {
> netdev_err(priv->netdev, "Unknow error (flags: 0x%02x)\n",
> - msg->u.rx_can.flag);
> + msg->u.rx_can_header.flag);
>
> stats->rx_errors++;
> return;
> }
>
> - if (msg->u.rx_can.flag & MSG_FLAG_OVERRUN) {
> + if (msg->u.rx_can_header.flag & MSG_FLAG_OVERRUN) {
> stats->rx_over_errors++;
> stats->rx_errors++;
>
> @@ -817,7 +1112,8 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev,
> struct can_frame *cf;
> struct sk_buff *skb;
> struct net_device_stats *stats;
> - u8 channel = msg->u.rx_can.channel;
> + u8 channel = msg->u.rx_can_header.channel;
> + const u8 *rx_msg;
>
> if (channel >= dev->nchannels) {
> dev_err(dev->udev->dev.parent,
> @@ -828,19 +1124,32 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev,
> priv = dev->nets[channel];
> stats = &priv->netdev->stats;
>
> - if ((msg->u.rx_can.flag & MSG_FLAG_ERROR_FRAME) &&
> - (msg->id == CMD_LOG_MESSAGE)) {
> - kvaser_usb_rx_error(dev, msg);
> + if ((msg->u.rx_can_header.flag & MSG_FLAG_ERROR_FRAME) &&
> + (dev->family == KVASER_LEAF && msg->id == CMD_LEAF_LOG_MESSAGE)) {
> + kvaser_leaf_rx_error(dev, msg);
> return;
> - } else if (msg->u.rx_can.flag & (MSG_FLAG_ERROR_FRAME |
> - MSG_FLAG_NERR |
> - MSG_FLAG_OVERRUN)) {
> + } else if (msg->u.rx_can_header.flag & (MSG_FLAG_ERROR_FRAME |
> + MSG_FLAG_NERR |
> + MSG_FLAG_OVERRUN)) {
> kvaser_usb_rx_can_err(priv, msg);
> return;
> - } else if (msg->u.rx_can.flag & ~MSG_FLAG_REMOTE_FRAME) {
> + } else if (msg->u.rx_can_header.flag & ~MSG_FLAG_REMOTE_FRAME) {
> netdev_warn(priv->netdev,
> "Unhandled frame (flags: 0x%02x)",
> - msg->u.rx_can.flag);
> + msg->u.rx_can_header.flag);
> + return;
> + }
> +
> + switch (dev->family) {
> + case KVASER_LEAF:
> + rx_msg = msg->u.leaf.rx_can.msg;
> + break;
> + case KVASER_USBCAN:
> + rx_msg = msg->u.usbcan.rx_can.msg;
> + break;
> + default:
> + dev_err(dev->udev->dev.parent,
> + "Invalid device family (%d)\n", dev->family);
> return;
> }
>
> @@ -850,38 +1159,37 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev,
> return;
> }
>
> - if (msg->id == CMD_LOG_MESSAGE) {
> - cf->can_id = le32_to_cpu(msg->u.log_message.id);
> + if (dev->family == KVASER_LEAF && msg->id == CMD_LEAF_LOG_MESSAGE) {
> + cf->can_id = le32_to_cpu(msg->u.leaf.log_message.id);
> if (cf->can_id & KVASER_EXTENDED_FRAME)
> cf->can_id &= CAN_EFF_MASK | CAN_EFF_FLAG;
> else
> cf->can_id &= CAN_SFF_MASK;
>
> - cf->can_dlc = get_can_dlc(msg->u.log_message.dlc);
> + cf->can_dlc = get_can_dlc(msg->u.leaf.log_message.dlc);
>
> - if (msg->u.log_message.flags & MSG_FLAG_REMOTE_FRAME)
> + if (msg->u.leaf.log_message.flags & MSG_FLAG_REMOTE_FRAME)
> cf->can_id |= CAN_RTR_FLAG;
> else
> - memcpy(cf->data, &msg->u.log_message.data,
> + memcpy(cf->data, &msg->u.leaf.log_message.data,
> cf->can_dlc);
> } else {
> - cf->can_id = ((msg->u.rx_can.msg[0] & 0x1f) << 6) |
> - (msg->u.rx_can.msg[1] & 0x3f);
> + cf->can_id = ((rx_msg[0] & 0x1f) << 6) | (rx_msg[1] & 0x3f);
>
> if (msg->id == CMD_RX_EXT_MESSAGE) {
> cf->can_id <<= 18;
> - cf->can_id |= ((msg->u.rx_can.msg[2] & 0x0f) << 14) |
> - ((msg->u.rx_can.msg[3] & 0xff) << 6) |
> - (msg->u.rx_can.msg[4] & 0x3f);
> + cf->can_id |= ((rx_msg[2] & 0x0f) << 14) |
> + ((rx_msg[3] & 0xff) << 6) |
> + (rx_msg[4] & 0x3f);
> cf->can_id |= CAN_EFF_FLAG;
> }
>
> - cf->can_dlc = get_can_dlc(msg->u.rx_can.msg[5]);
> + cf->can_dlc = get_can_dlc(rx_msg[5]);
>
> - if (msg->u.rx_can.flag & MSG_FLAG_REMOTE_FRAME)
> + if (msg->u.rx_can_header.flag & MSG_FLAG_REMOTE_FRAME)
> cf->can_id |= CAN_RTR_FLAG;
> else
> - memcpy(cf->data, &msg->u.rx_can.msg[6],
> + memcpy(cf->data, &rx_msg[6],
> cf->can_dlc);
> }
>
> @@ -944,21 +1252,35 @@ static void kvaser_usb_handle_message(const struct kvaser_usb *dev,
>
> case CMD_RX_STD_MESSAGE:
> case CMD_RX_EXT_MESSAGE:
> - case CMD_LOG_MESSAGE:
> + kvaser_usb_rx_can_msg(dev, msg);
> + break;
> +
> + case CMD_LEAF_LOG_MESSAGE:
> + if (dev->family != KVASER_LEAF)
> + goto warn;
> kvaser_usb_rx_can_msg(dev, msg);
> break;
>
> case CMD_CHIP_STATE_EVENT:
> case CMD_CAN_ERROR_EVENT:
> - kvaser_usb_rx_error(dev, msg);
> + if (dev->family == KVASER_LEAF)
> + kvaser_leaf_rx_error(dev, msg);
> + else
> + kvaser_usbcan_rx_error(dev, msg);
> break;
>
> case CMD_TX_ACKNOWLEDGE:
> kvaser_usb_tx_acknowledge(dev, msg);
> break;
>
> + /* Ignored messages */
> + case CMD_USBCAN_CLOCK_OVERFLOW_EVENT:
> + if (dev->family != KVASER_USBCAN)
> + goto warn;
> + break;
> +
> default:
> - dev_warn(dev->udev->dev.parent,
> +warn: dev_warn(dev->udev->dev.parent,
> "Unhandled message (%d)\n", msg->id);
> break;
> }
> @@ -1178,7 +1500,7 @@ static void kvaser_usb_unlink_all_urbs(struct kvaser_usb *dev)
> dev->rxbuf[i],
> dev->rxbuf_dma[i]);
>
> - for (i = 0; i < MAX_NET_DEVICES; i++) {
> + for (i = 0; i < dev->nchannels; i++) {
> struct kvaser_usb_net_priv *priv = dev->nets[i];
>
> if (priv)
> @@ -1286,6 +1608,7 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
> struct kvaser_msg *msg;
> int i, err;
> int ret = NETDEV_TX_OK;
> + uint8_t *msg_tx_can_flags;
>
> if (can_dropped_invalid_skb(netdev, skb))
> return NETDEV_TX_OK;
> @@ -1307,9 +1630,23 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
>
> msg = buf;
> msg->len = MSG_HEADER_LEN + sizeof(struct kvaser_msg_tx_can);
> - msg->u.tx_can.flags = 0;
> msg->u.tx_can.channel = priv->channel;
>
> + switch (dev->family) {
> + case KVASER_LEAF:
> + msg_tx_can_flags = &msg->u.tx_can.leaf.flags;
> + break;
> + case KVASER_USBCAN:
> + msg_tx_can_flags = &msg->u.tx_can.usbcan.flags;
> + break;
> + default:
> + dev_err(dev->udev->dev.parent,
> + "Invalid device family (%d)\n", dev->family);
> + goto releasebuf;
> + }
> +
> + *msg_tx_can_flags = 0;
> +
> if (cf->can_id & CAN_EFF_FLAG) {
> msg->id = CMD_TX_EXT_MESSAGE;
> msg->u.tx_can.msg[0] = (cf->can_id >> 24) & 0x1f;
> @@ -1327,7 +1664,7 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
> memcpy(&msg->u.tx_can.msg[6], cf->data, cf->can_dlc);
>
> if (cf->can_id & CAN_RTR_FLAG)
> - msg->u.tx_can.flags |= MSG_FLAG_REMOTE_FRAME;
> + *msg_tx_can_flags |= MSG_FLAG_REMOTE_FRAME;
>
> for (i = 0; i < ARRAY_SIZE(priv->tx_contexts); i++) {
> if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) {
> @@ -1596,6 +1933,17 @@ static int kvaser_usb_probe(struct usb_interface *intf,
> if (!dev)
> return -ENOMEM;
>
> + if (kvaser_is_leaf(id)) {
> + dev->family = KVASER_LEAF;
> + } else if (kvaser_is_usbcan(id)) {
> + dev->family = KVASER_USBCAN;
> + } else {
> + dev_err(&intf->dev,
> + "Product ID (%d) does not belong to any known Kvaser USB family",
> + id->idProduct);
> + return -ENODEV;
> + }
> +
> err = kvaser_usb_get_endpoints(intf, &dev->bulk_in, &dev->bulk_out);
> if (err) {
> dev_err(&intf->dev, "Cannot get usb endpoint(s)");
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists