| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 12 Jan 2015 11:38:56 +0530
From: Sreekanth Reddy <sreekanth.reddy@...gotech.com>
To: jejb@...nel.org, hch@...radead.org
Cc: martin.petersen@...cle.com, linux-scsi@...r.kernel.org,
JBottomley@...allels.com, Sathya.Prakash@...gotech.com,
Nagalakshmi.Nandigama@...gotech.com, linux-kernel@...r.kernel.org,
Sreekanth Reddy <Sreekanth.Reddy@...gotech.com>
Subject: [PATCH v2 02/22] [SCSI] mpt2sas, mpt3sas: Added support to log message when Temperature Threshold exceeds for any Sensor
This patch will log a message when driver receives "Temperature Threshold exceeded" event from any temperature sensor.
The message will look similar to like
mpt3sas0: Temperature Threshold flags a b c d exceeded for Sensor: x !!!
mpt3sas0: Current Temp In Celsius: y
where a b c d are threshold flags 0 1 2 3
Change_set:
1. Get the number of sensor count of this IOC by reading IO Unit page 8 at driver initialization time.
2. Also unmask the Temperature Threshold Event at driver initialization time,
3. Whenever a MPI2_EVENT_TEMP_THRESHOLD event is received from the firmware then print the sensor number, the maximum threshold number it has exceed and the current temperature of this sensor.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@...gotech.com>
Reviewed-by: Martin K. Petersen <martin.petersen@...cle.com>
---
drivers/scsi/mpt2sas/mpt2sas_base.c | 7 +++++++
drivers/scsi/mpt2sas/mpt2sas_base.h | 6 ++++++
drivers/scsi/mpt2sas/mpt2sas_config.c | 36 +++++++++++++++++++++++++++++++++++
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 31 ++++++++++++++++++++++++++++++
drivers/scsi/mpt3sas/mpt3sas_base.c | 8 ++++++++
drivers/scsi/mpt3sas/mpt3sas_base.h | 6 ++++++
drivers/scsi/mpt3sas/mpt3sas_config.c | 36 +++++++++++++++++++++++++++++++++++
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 31 ++++++++++++++++++++++++++++++
8 files changed, 161 insertions(+)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 58e4521..13d1d5b 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -639,6 +639,9 @@ _base_display_event_data(struct MPT2SAS_ADAPTER *ioc,
if (!ioc->hide_ir_msg)
desc = "Log Entry Added";
break;
+ case MPI2_EVENT_TEMP_THRESHOLD:
+ desc = "Temperature Threshold";
+ break;
}
if (!desc)
@@ -2338,6 +2341,7 @@ _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
mpt2sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
mpt2sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
mpt2sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+ mpt2sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
_base_display_ioc_capabilities(ioc);
/*
@@ -2355,6 +2359,8 @@ _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
mpt2sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+ if (ioc->iounit_pg8.NumSensors)
+ ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
}
/**
@@ -4594,6 +4600,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
_base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
+ _base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
r = _base_make_ioc_operational(ioc, CAN_SLEEP);
if (r)
goto out_free_resources;
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 239f169..8a41a4e 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -725,6 +725,7 @@ typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc);
* @ioc_pg8: static ioc page 8
* @iounit_pg0: static iounit page 0
* @iounit_pg1: static iounit page 1
+ * @iounit_pg8: static iounit page 8
* @sas_hba: sas host object
* @sas_expander_list: expander object list
* @sas_node_lock:
@@ -795,6 +796,7 @@ typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc);
* @reply_post_host_index: head index in the pool where FW completes IO
* @delayed_tr_list: target reset link list
* @delayed_tr_volume_list: volume target reset link list
+ * @@temp_sensors_count: flag to carry the number of temperature sensors
*/
struct MPT2SAS_ADAPTER {
struct list_head list;
@@ -892,6 +894,7 @@ struct MPT2SAS_ADAPTER {
Mpi2IOCPage8_t ioc_pg8;
Mpi2IOUnitPage0_t iounit_pg0;
Mpi2IOUnitPage1_t iounit_pg1;
+ Mpi2IOUnitPage8_t iounit_pg8;
struct _boot_device req_boot_device;
struct _boot_device req_alt_boot_device;
@@ -992,6 +995,7 @@ struct MPT2SAS_ADAPTER {
struct list_head delayed_tr_list;
struct list_head delayed_tr_volume_list;
+ u8 temp_sensors_count;
/* diag buffer support */
u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
@@ -1120,6 +1124,8 @@ int mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2IOUnitPage1_t *config_page);
int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2IOUnitPage1_t *config_page);
+int mpt2sas_config_get_iounit_pg8(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page);
int mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz);
int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index c72a2ff..41a8f84 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -719,6 +719,42 @@ mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc,
}
/**
+ * mpt2sas_config_get_iounit_pg8 - obtain iounit page 8
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt2sas_config_get_iounit_pg8(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+ mpi_request.Header.PageNumber = 8;
+ mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION;
+ mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ sizeof(*config_page));
+ out:
+ return r;
+}
+
+/**
* mpt2sas_config_get_ioc_pg8 - obtain ioc page 8
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 6a1c036..bbdea00 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -3647,6 +3647,31 @@ _scsih_check_volume_delete_events(struct MPT2SAS_ADAPTER *ioc,
}
/**
+ * _scsih_temp_threshold_events - display temperature threshold exceeded events
+ * @ioc: per adapter object
+ * @event_data: the temp threshold event data
+ * Context: interrupt time.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_temp_threshold_events(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventDataTemperature_t *event_data)
+{
+ if (ioc->temp_sensors_count >= event_data->SensorNum) {
+ printk(MPT2SAS_ERR_FMT "Temperature Threshold flags %s%s%s%s"
+ " exceeded for Sensor: %d !!!\n", ioc->name,
+ ((event_data->Status & 0x1) == 1) ? "0 " : " ",
+ ((event_data->Status & 0x2) == 2) ? "1 " : " ",
+ ((event_data->Status & 0x4) == 4) ? "2 " : " ",
+ ((event_data->Status & 0x8) == 8) ? "3 " : " ",
+ event_data->SensorNum);
+ printk(MPT2SAS_ERR_FMT "Current Temp In Celsius: %d\n",
+ ioc->name, event_data->CurrentTemperature);
+ }
+}
+
+/**
* _scsih_flush_running_cmds - completing outstanding commands.
* @ioc: per adapter object
*
@@ -7557,6 +7582,12 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
case MPI2_EVENT_IR_PHYSICAL_DISK:
break;
+ case MPI2_EVENT_TEMP_THRESHOLD:
+ _scsih_temp_threshold_events(ioc,
+ (Mpi2EventDataTemperature_t *)
+ mpi_reply->EventData);
+ break;
+
default: /* ignore the rest */
return;
}
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 1560115..f1918cf 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -619,6 +619,9 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
case MPI2_EVENT_LOG_ENTRY_ADDED:
desc = "Log Entry Added";
break;
+ case MPI2_EVENT_TEMP_THRESHOLD:
+ desc = "Temperature Threshold";
+ break;
}
if (!desc)
@@ -2500,6 +2503,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+ mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8);
_base_display_ioc_capabilities(ioc);
/*
@@ -2516,6 +2520,9 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+
+ if (ioc->iounit_pg8.NumSensors)
+ ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors;
}
/**
@@ -4720,6 +4727,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
_base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
+ _base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
r = _base_make_ioc_operational(ioc, CAN_SLEEP);
if (r)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 40926aa..4fef8f3 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -659,6 +659,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
* @ioc_pg8: static ioc page 8
* @iounit_pg0: static iounit page 0
* @iounit_pg1: static iounit page 1
+ * @iounit_pg8: static iounit page 8
* @sas_hba: sas host object
* @sas_expander_list: expander object list
* @sas_node_lock:
@@ -728,6 +729,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
* @reply_post_host_index: head index in the pool where FW completes IO
* @delayed_tr_list: target reset link list
* @delayed_tr_volume_list: volume target reset link list
+ * @@temp_sensors_count: flag to carry the number of temperature sensors
*/
struct MPT3SAS_ADAPTER {
struct list_head list;
@@ -834,6 +836,7 @@ struct MPT3SAS_ADAPTER {
Mpi2IOCPage8_t ioc_pg8;
Mpi2IOUnitPage0_t iounit_pg0;
Mpi2IOUnitPage1_t iounit_pg1;
+ Mpi2IOUnitPage8_t iounit_pg8;
struct _boot_device req_boot_device;
struct _boot_device req_alt_boot_device;
@@ -934,6 +937,7 @@ struct MPT3SAS_ADAPTER {
struct list_head delayed_tr_list;
struct list_head delayed_tr_volume_list;
+ u8 temp_sensors_count;
/* diag buffer support */
u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
@@ -1082,6 +1086,8 @@ int mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2IOUnitPage1_t *config_page);
int mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2IOUnitPage1_t *config_page);
+int mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
+ *mpi_reply, Mpi2IOUnitPage8_t *config_page);
int mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
u16 sz);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index 4472c2a..6582193 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -871,6 +871,42 @@ mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
}
/**
+ * mpt3sas_config_get_iounit_pg8 - obtain iounit page 8
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page)
+{
+ Mpi2ConfigRequest_t mpi_request;
+ int r;
+
+ memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_CONFIG;
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+ mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
+ mpi_request.Header.PageNumber = 8;
+ mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION;
+ ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+ if (r)
+ goto out;
+
+ mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+ r = _config_request(ioc, &mpi_request, mpi_reply,
+ MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+ sizeof(*config_page));
+ out:
+ return r;
+}
+
+/**
* mpt3sas_config_get_ioc_pg8 - obtain ioc page 8
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 94261ee..d36c304 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3342,6 +3342,31 @@ _scsih_check_volume_delete_events(struct MPT3SAS_ADAPTER *ioc,
}
/**
+ * _scsih_temp_threshold_events - display temperature threshold exceeded events
+ * @ioc: per adapter object
+ * @event_data: the temp threshold event data
+ * Context: interrupt time.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_temp_threshold_events(struct MPT3SAS_ADAPTER *ioc,
+ Mpi2EventDataTemperature_t *event_data)
+{
+ if (ioc->temp_sensors_count >= event_data->SensorNum) {
+ pr_err(MPT3SAS_FMT "Temperature Threshold flags %s%s%s%s"
+ " exceeded for Sensor: %d !!!\n", ioc->name,
+ ((event_data->Status & 0x1) == 1) ? "0 " : " ",
+ ((event_data->Status & 0x2) == 2) ? "1 " : " ",
+ ((event_data->Status & 0x4) == 4) ? "2 " : " ",
+ ((event_data->Status & 0x8) == 8) ? "3 " : " ",
+ event_data->SensorNum);
+ pr_err(MPT3SAS_FMT "Current Temp In Celsius: %d\n",
+ ioc->name, event_data->CurrentTemperature);
+ }
+}
+
+/**
* _scsih_flush_running_cmds - completing outstanding commands.
* @ioc: per adapter object
*
@@ -7194,6 +7219,12 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
case MPI2_EVENT_IR_PHYSICAL_DISK:
break;
+ case MPI2_EVENT_TEMP_THRESHOLD:
+ _scsih_temp_threshold_events(ioc,
+ (Mpi2EventDataTemperature_t *)
+ mpi_reply->EventData);
+ break;
+
default: /* ignore the rest */
return 1;
}
--
2.0.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists