| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1421316574-10022-3-git-send-email-dbaryshkov@gmail.com>
Date: Thu, 15 Jan 2015 13:09:32 +0300
From: Dmitry Eremin-Solenikov <dbaryshkov@...il.com>
To: Russell King <linux@....linux.org.uk>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Andrea Adami <andrea.adami@...il.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 3/5] ARM: sa1100: use ioremapped memory to access SC registers
Use ioremap() and readl/writel_relaxed() to access IRQ controller
registers.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@...il.com>
---
arch/arm/mach-sa1100/irq.c | 63 +++++++++++++++++++++++++++++++++-------------
1 file changed, 45 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 7a5aa56..66464fd 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -18,13 +18,20 @@
#include <linux/ioport.h>
#include <linux/syscore_ops.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <asm/mach/irq.h>
#include <asm/exception.h>
#include "generic.h"
+#define ICIP 0x00 /* IC IRQ Pending reg. */
+#define ICMR 0x04 /* IC Mask Reg. */
+#define ICLR 0x08 /* IC Level Reg. */
+#define ICCR 0x0C /* IC Control Reg. */
+#define ICFP 0x10 /* IC FIQ Pending reg. */
+#define ICPR 0x20 /* IC Pending Reg. */
+
+static void __iomem *iobase;
+static DEFINE_RAW_SPINLOCK(lock);
/*
* We don't need to ACK IRQs on the SA1100 unless they're GPIOs
@@ -32,12 +39,30 @@
*/
static void sa1100_mask_irq(struct irq_data *d)
{
- ICMR &= ~BIT(d->hwirq);
+ u32 reg;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&lock, flags);
+
+ reg = readl_relaxed(iobase + ICMR);
+ reg &= ~BIT(d->hwirq);
+ writel_relaxed(reg, iobase + ICMR);
+
+ raw_spin_unlock_irqrestore(&lock, flags);
}
static void sa1100_unmask_irq(struct irq_data *d)
{
- ICMR |= BIT(d->hwirq);
+ u32 reg;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&lock, flags);
+
+ reg = readl_relaxed(iobase + ICMR);
+ reg |= BIT(d->hwirq);
+ writel_relaxed(reg, iobase + ICMR);
+
+ raw_spin_unlock_irqrestore(&lock, flags);
}
static int sa1100_set_wake(struct irq_data *d, unsigned int on)
@@ -85,16 +110,14 @@ static int sa1100irq_suspend(void)
struct sa1100irq_state *st = &sa1100irq_state;
st->saved = 1;
- st->icmr = ICMR;
- st->iclr = ICLR;
- st->iccr = ICCR;
+ st->icmr = readl_relaxed(iobase + ICMR);
+ st->iclr = readl_relaxed(iobase + ICLR);
+ st->iccr = readl_relaxed(iobase + ICCR);
/*
* Disable all GPIO-based interrupts.
*/
- ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7|
- IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
- IC_GPIO1|IC_GPIO0);
+ writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR);
return 0;
}
@@ -104,10 +127,10 @@ static void sa1100irq_resume(void)
struct sa1100irq_state *st = &sa1100irq_state;
if (st->saved) {
- ICCR = st->iccr;
- ICLR = st->iclr;
+ writel_relaxed(st->iccr, iobase + ICCR);
+ writel_relaxed(st->iclr, iobase + ICLR);
- ICMR = st->icmr;
+ writel_relaxed(st->icmr, iobase + ICMR);
}
}
@@ -130,8 +153,8 @@ sa1100_handle_irq(struct pt_regs *regs)
uint32_t icip, icmr, mask;
do {
- icip = (ICIP);
- icmr = (ICMR);
+ icip = readl_relaxed(iobase + ICIP);
+ icmr = readl_relaxed(iobase + ICMR);
mask = icip & icmr;
if (mask == 0)
@@ -146,17 +169,21 @@ void __init sa1100_init_irq(void)
{
request_resource(&iomem_resource, &irq_resource);
+ iobase = ioremap(irq_resource.start, SZ_64K);
+ if (WARN_ON(!iobase))
+ return;
+
/* disable all IRQs */
- ICMR = 0;
+ writel_relaxed(0, iobase + ICMR);
/* all IRQs are IRQ, not FIQ */
- ICLR = 0;
+ writel_relaxed(0, iobase + ICLR);
/*
* Whatever the doc says, this has to be set for the wait-on-irq
* instruction to work... on a SA1100 rev 9 at least.
*/
- ICCR = 1;
+ writel_relaxed(1, iobase + ICCR);
sa1100_normal_irqdomain = irq_domain_add_simple(NULL,
32, IRQ_GPIO0_SC,
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists