[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150115210310.GB24008@amd>
Date: Thu, 15 Jan 2015 22:03:11 +0100
From: Pavel Machek <pavel@....cz>
To: Sylwester Nawrocki <s.nawrocki@...sung.com>
Cc: Mark Brown <broonie@...nel.org>,
Rob Herring <robherring2@...il.com>,
Jacek Anaszewski <j.anaszewski@...sung.com>,
linux-leds@...r.kernel.org,
"linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Kyungmin Park <kyungmin.park@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Bryan Wu <cooloney@...il.com>,
Richard Purdie <rpurdie@...ys.net>, sakari.ailus@....fi,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Liam Girdwood <lgirdwood@...il.com>
Subject: Re: [PATCH/RFC v10 03/19] DT: leds: Add led-sources property
Hi!
> Perhaps we could use the 'reg' property to describe actual connections,
> I'm not sure if it's better than a LED specific property, e.g.
>
> max77387@52 {
> compatible = "nxp,max77387";
> #address-cells = <2>;
> #size-cells = <0>;
> reg = <0x52>;
>
> flash_led {
> reg = <1 1>;
> ...
> };
> };
Normally, reg property is <start length>, if I understand things
correctly? Would that be enough here, or would we be doing list of
outputs?
Thanks,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists