| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <54B86DF8.3040206@oracle.com>
Date: Fri, 16 Jan 2015 09:48:40 +0800
From: ethan zhao <ethan.zhao@...cle.com>
To: "Dev, Vasu" <vasu.dev@...el.com>
CC: Ethan Zhao <ethan.kernel@...il.com>,
"Ronciak, John" <john.ronciak@...el.com>,
"Kirsher, Jeffrey T" <jeffrey.t.kirsher@...el.com>,
"Brandeburg, Jesse" <jesse.brandeburg@...el.com>,
"Allan, Bruce W" <bruce.w.allan@...el.com>,
"Wyborny, Carolyn" <carolyn.wyborny@...el.com>,
"Skidmore, Donald C" <donald.c.skidmore@...el.com>,
"Rose, Gregory V" <gregory.v.rose@...el.com>,
"Vick, Matthew" <matthew.vick@...el.com>,
"Williams, Mitch A" <mitch.a.williams@...el.com>,
"Parikh, Neerav" <neerav.parikh@...el.com>,
Linux NICS <Linux-nics@...tope.jf.intel.com>,
"e1000-devel@...ts.sourceforge.net"
<e1000-devel@...ts.sourceforge.net>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"brian.maly@...cle.com" <brian.maly@...cle.com>
Subject: Re: [PATCH] i40e: don't enable and init FCOE by default when do PF
reset
Vasu,
OK, disable FCOE as default configuration as a temporary step to
make it work.
Thanks,
Ethan
On 2015/1/16 7:45, Dev, Vasu wrote:
>> -----Original Message-----
>> From: ethan zhao [mailto:ethan.zhao@...cle.com]
>> Sent: Tuesday, January 13, 2015 6:41 PM
>> To: Dev, Vasu
>> Cc: Ethan Zhao; Ronciak, John; Kirsher, Jeffrey T; Brandeburg, Jesse; Allan,
>> Bruce W; Wyborny, Carolyn; Skidmore, Donald C; Rose, Gregory V; Vick,
>> Matthew; Williams, Mitch A; Parikh, Neerav; Linux NICS; e1000-
>> devel@...ts.sourceforge.net; netdev@...r.kernel.org; linux-
>> kernel@...r.kernel.org; brian.maly@...cle.com
>> Subject: Re: [PATCH] i40e: don't enable and init FCOE by default when do PF
>> reset
>>
>> Vasu,
>>
>> On 2015/1/14 3:38, Dev, Vasu wrote:
>>>> -----Original Message-----
>>>>>>> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c
>>>>>>> b/drivers/net/ethernet/intel/i40e/i40e_main.c
>>>>>>> index a5f2660..a2572cc 100644
>>>>>>> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
>>>>>>> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
>>>>>>> @@ -6180,9 +6180,12 @@ static void i40e_reset_and_rebuild(struct
>>>>>>> i40e_pf *pf, bool reinit)
>>>>>>> }
>>>>>>> #endif /* CONFIG_I40E_DCB */
>>>>>>> #ifdef I40E_FCOE
>>>>>>> - ret = i40e_init_pf_fcoe(pf);
>>>>>>> - if (ret)
>>>>>>> - dev_info(&pf->pdev->dev, "init_pf_fcoe failed: %d\n", ret);
>>>>>>> + if (pf->flags & I40E_FLAG_FCOE_ENABLED) {
>>>>>>> + ret = i40e_init_pf_fcoe(pf);
>>>>> Calling i40e_init_pf_fcoe() here conflicts with its
>>>> I40E_FLAG_FCOE_ENABLED pre-condition since
>> I40E_FLAG_FCOE_ENABLED is
>>>> set by very same i40e_init_pf_fcoe(), in turn i40e_init_pf_fcoe()
>>>> will never get called.
>>>>
>>>> I don't think so, here ,i40e_reset_and_rebuild() is not the only
>>>> and the first place that i40e_init_pf_fcoe() is called, see
>>>> i40e_probe(), that is the first chance.
>>>>
>>>> i40e_probe()
>>>> -->i40e_sw_init()
>>>> -->i40e_init_pf_fcoe()
>>>>
>>>> And the I40E_FLAG_FCOE_ENABLED is possible be set by
>>>> i40e_fcoe_enable() or i40e_fcoe_disable() interface before the reset
>>>> action is to be done.
>>>>
>>> It is set by i40e_init_pf_fcoe() and you are right that the modified call flow
>> by your patch won't impact setting of I40E_FLAG_FCOE_ENABLED anyway
>> which could have prevented calling i40e_init_pf_fcoe() as I described above,
>> so this is not an issue with the patch.
>>>> BTW, the reason I post this patch is that we hit a bug, after setup
>>>> vlan, the PF is enabled to FCOE.
>>>>
>>> Then that BUG would still remain un-fixed and calling i40e_init_pf_fcoe()
>> under I40E_FLAG_FCOE_ENABLED flag really won't affect call flow to fix
>> anything. I mean I40E_FLAG_FCOE_ENABLED condition will be true with "pf-
>>> hw.func_caps.fcoe == true" and otherwise calling i40e_init_pf_fcoe() simply
>> returns back early on after checking "pf->hw.func_caps.fcoe == false", so
>> how that bug is fixed here by added I40E_FLAG_FCOE_ENABLED condition ?
>> What is the bug ?
>> The func_caps.fcoe is assigned by following call path, under our test
>> environment,
>>
>> i40e_probe()
>> ->i40e_get_capabilities()
>> ->i40e_aq_discover_capabilities()
>> ->i40e_parse_discover_capabilities()
>>
>> Or
>>
>> i40e_reset_and_rebuild()
>> ->i40e_get_capabilities()
>> ->i40e_aq_discover_capabilities()
>> ->i40e_parse_discover_capabilities()
>>
>> Under our test environment, the "pf->hw.func_caps.fcoe" is true. so if
>> i40e_reset_and_rebuild() is called for VLAN setup, ethtool diagnostic test.
>> And then i40e_init_pf_fcoe() is to be called,
>>
>> While if (!pf->hw.func_caps.fcoe) wouldn't return,
>>
> I said it would return with "pf->hw.func_caps.fcoe == false" in my last response, more details below.
>
>> So pf->flags is set to I40E_FLAG_FCOE_ENABLED.
>>
>> With my patch, i40e_init_pf_fcoe() is only called after
>> I40E_FLAG_FCOE_ENABLED is set before reset.
>>
>> Enable FCOE in i40e_probe() or not is another issue.
>>
> Nope since both cases we should do i40e_init_pf_fcoe() or don't based on fcoe cap true or false.
>
> I don't have much to add as I described before with the your patch that "calling i40e_init_pf_fcoe() under I40E_FLAG_FCOE_ENABLED flag really won't affect call flow to fix anything. I mean I40E_FLAG_FCOE_ENABLED condition will be true with "pf->hw.func_caps.fcoe == true" and otherwise calling i40e_init_pf_fcoe() simply returns back early on after checking "pf->hw.func_caps.fcoe == false".
>
> May be I'm missing something, I guess next either go with CONFIG_I40E_FCOE disable as I suggested before and now it in upstream kernel or we can have further off list discussion to fix the issue you are trying to fix with the patch.
>
> Thanks,
> Vasu
>
>> Thanks,
>> Ethan
>>
>>
>>>>> Jeff Kirsher should be getting out a patch queued by me which adds
>>>> I40E_FCoE Kbuild option, in that FCoE is disabled by default and
>>>> user could enable FCoE only if needed, that patch would do same of
>>>> skipping
>>>> i40e_init_pf_fcoe() whether FCoE capability in device enabled or not
>>>> in default config.
>>>> The following patch will not fix the above issue -- configuration of
>>>> PF will be changed via reset.
>>>> How about the FCOE is configured and disabled by i40e_fcoe_disable()
>>>> , then reset happens ?
>>>>
>>> May be but if the BUG is due to FCoE being enabled then having it disabled
>> in config will avoid the bug for non FCoE config option and once bug is
>> understood then that has to be fixed for FCoE enabled config also as I asked
>> above.
>>> Thanks Ethan for detailed response.
>>> Vasu
>>>
>>>>> From patchwork Wed Oct 2 23:26:08 2013
>>>>> Content-Type: text/plain; charset="utf-8"
>>>>> MIME-Version: 1.0
>>>>> Content-Transfer-Encoding: 7bit
>>>>> Subject: [net] i40e: adds FCoE configure option
>>>>> Date: Thu, 03 Oct 2013 07:26:08 -0000
>>>>> From: Vasu Dev <vasu.dev@...el.com>
>>>>> X-Patchwork-Id: 11797
>>>>>
>>>>> Adds FCoE config option I40E_FCOE, so that FCoE can be enabled as
>>>>> needed but otherwise have it disabled by default.
>>>>>
>>>>> This also eliminate multiple FCoE config checks, instead now just
>>>>> one config check for CONFIG_I40E_FCOE.
>>>>>
>>>>> The I40E FCoE was added with 3.17 kernel and therefore this patch
>>>>> shall be applied to stable 3.17 kernel also.
>>>>>
>>>>> CC: <stable@...r.kernel.org>
>>>>> Signed-off-by: Vasu Dev <vasu.dev@...el.com>
>>>>> Tested-by: Jim Young <jamesx.m.young@...el.com>
>>>>>
>>>>> ---
>>>>> drivers/net/ethernet/intel/Kconfig | 11 +++++++++++
>>>>> drivers/net/ethernet/intel/i40e/Makefile | 2 +-
>>>>> drivers/net/ethernet/intel/i40e/i40e_osdep.h | 4 ++--
>>>>> 3 files changed, 14 insertions(+), 3 deletions(-)
>>>>>
>>>>> diff --git a/drivers/net/ethernet/intel/Kconfig
>>>>> b/drivers/net/ethernet/intel/Kconfig
>>>>> index 5b8300a..4d61ef5 100644
>>>>> --- a/drivers/net/ethernet/intel/Kconfig
>>>>> +++ b/drivers/net/ethernet/intel/Kconfig
>>>>> @@ -281,6 +281,17 @@ config I40E_DCB
>>>>>
>>>>> If unsure, say N.
>>>>>
>>>>> +config I40E_FCOE
>>>>> + bool "Fibre Channel over Ethernet (FCoE)"
>>>>> + default n
>>>>> + depends on I40E && DCB && FCOE
>>>>> + ---help---
>>>>> + Say Y here if you want to use Fibre Channel over Ethernet (FCoE)
>>>>> + in the driver. This will create new netdev for exclusive FCoE
>>>>> + use with XL710 FCoE offloads enabled.
>>>>> +
>>>>> + If unsure, say N.
>>>>> +
>>>>> config I40EVF
>>>>> tristate "Intel(R) XL710 X710 Virtual Function Ethernet support"
>>>>> depends on PCI_MSI
>>>>> diff --git a/drivers/net/ethernet/intel/i40e/Makefile
>>>>> b/drivers/net/ethernet/intel/i40e/Makefile
>>>>> index 4b94ddb..c405819 100644
>>>>> --- a/drivers/net/ethernet/intel/i40e/Makefile
>>>>> +++ b/drivers/net/ethernet/intel/i40e/Makefile
>>>>> @@ -44,4 +44,4 @@ i40e-objs := i40e_main.o \
>>>>> i40e_virtchnl_pf.o
>>>>>
>>>>> i40e-$(CONFIG_I40E_DCB) += i40e_dcb.o i40e_dcb_nl.o
>>>>> -i40e-$(CONFIG_FCOE:m=y) += i40e_fcoe.o
>>>>> +i40e-$(CONFIG_I40E_FCOE) += i40e_fcoe.o
>>>>> diff --git a/drivers/net/ethernet/intel/i40e/i40e_osdep.h
>>>>> b/drivers/net/ethernet/intel/i40e/i40e_osdep.h
>>>>> index 045b5c4..ad802dd 100644
>>>>> --- a/drivers/net/ethernet/intel/i40e/i40e_osdep.h
>>>>> +++ b/drivers/net/ethernet/intel/i40e/i40e_osdep.h
>>>>> @@ -78,7 +78,7 @@ do { \
>>>>> } while (0)
>>>>>
>>>>> typedef enum i40e_status_code i40e_status; -#if
>>>>> defined(CONFIG_FCOE)
>>>>> || defined(CONFIG_FCOE_MODULE)
>>>>> +#ifdef CONFIG_I40E_FCOE
>>>>> #define I40E_FCOE
>>>>> -#endif /* CONFIG_FCOE or CONFIG_FCOE_MODULE */
>>>>> +#endif
>>>>> #endif /* _I40E_OSDEP_H_ */
>>>>>
>>>>>>> + if (ret)
>>>>>>> + dev_info(&pf->pdev->dev,
>>>>>>> + "init_pf_fcoe failed: %d\n", ret);
>>>>>>> + }
>>>>>>>
>>>>>>> #endif
>>>>>>> /* do basic switch setup */
>>>>>>> --
>>>>>>> 1.8.3.1
>>>> Thanks,
>>>> Ethan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists