| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150118051733.GD1937@zenbook.hsd1.ca.comcast.net>
Date: Sat, 17 Jan 2015 21:17:33 -0800
From: Andrew Milkovich <amilkovich@...il.com>
To: Andrew Milkovich <amilkovich@...il.com>
Cc: lidza.louina@...il.com, markh@...pro.net,
gregkh@...uxfoundation.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] Staging: dgnc: fixed some coding style errors
On Sat, Jan 17, 2015 at 09:09:08PM -0800, Andrew Milkovich wrote:
> This patch fixes the following checkpatch.pl error:
> ERROR: Macros with complex values should be enclosed in parentheses
> Outer parentheses were added to macro definitions.
>
> Signed-off-by: Andrew Milkovich <amilkovich@...il.com>
> ---
> drivers/staging/dgnc/digi.h | 60 ++++++++++++++++++++++-----------------------
> 1 file changed, 30 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/staging/dgnc/digi.h b/drivers/staging/dgnc/digi.h
> index 3181a35..d6e0b9f 100644
> --- a/drivers/staging/dgnc/digi.h
> +++ b/drivers/staging/dgnc/digi.h
> @@ -38,8 +38,8 @@
>
> #if !defined(TIOCMODG)
>
> -#define TIOCMODG ('d'<<8) | 250 /* get modem ctrl state */
> -#define TIOCMODS ('d'<<8) | 251 /* set modem ctrl state */
> +#define TIOCMODG (('d'<<8) | 250) /* get modem ctrl state */
> +#define TIOCMODS (('d'<<8) | 251) /* set modem ctrl state */
>
> #ifndef TIOCM_LE
> #define TIOCM_LE 0x01 /* line enable */
> @@ -58,44 +58,44 @@
> #endif
>
> #if !defined(TIOCMSET)
> -#define TIOCMSET ('d'<<8) | 252 /* set modem ctrl state */
> -#define TIOCMGET ('d'<<8) | 253 /* set modem ctrl state */
> +#define TIOCMSET (('d'<<8) | 252) /* set modem ctrl state */
> +#define TIOCMGET (('d'<<8) | 253) /* set modem ctrl state */
> #endif
>
> #if !defined(TIOCMBIC)
> -#define TIOCMBIC ('d'<<8) | 254 /* set modem ctrl state */
> -#define TIOCMBIS ('d'<<8) | 255 /* set modem ctrl state */
> +#define TIOCMBIC (('d'<<8) | 254) /* set modem ctrl state */
> +#define TIOCMBIS (('d'<<8) | 255) /* set modem ctrl state */
> #endif
>
>
> #if !defined(TIOCSDTR)
> -#define TIOCSDTR ('e'<<8) | 0 /* set DTR */
> -#define TIOCCDTR ('e'<<8) | 1 /* clear DTR */
> +#define TIOCSDTR (('e'<<8) | 0) /* set DTR */
> +#define TIOCCDTR (('e'<<8) | 1) /* clear DTR */
> #endif
>
> /************************************************************************
> * Ioctl command arguments for DIGI parameters.
> ************************************************************************/
> -#define DIGI_GETA ('e'<<8) | 94 /* Read params */
> +#define DIGI_GETA (('e'<<8) | 94) /* Read params */
>
> -#define DIGI_SETA ('e'<<8) | 95 /* Set params */
> -#define DIGI_SETAW ('e'<<8) | 96 /* Drain & set params */
> -#define DIGI_SETAF ('e'<<8) | 97 /* Drain, flush & set params */
> +#define DIGI_SETA (('e'<<8) | 95) /* Set params */
> +#define DIGI_SETAW (('e'<<8) | 96) /* Drain & set params */
> +#define DIGI_SETAF (('e'<<8) | 97) /* Drain, flush & set params */
>
> -#define DIGI_KME ('e'<<8) | 98 /* Read/Write Host */
> +#define DIGI_KME (('e'<<8) | 98) /* Read/Write Host */
> /* Adapter Memory */
>
> -#define DIGI_GETFLOW ('e'<<8) | 99 /* Get startc/stopc flow */
> +#define DIGI_GETFLOW (('e'<<8) | 99) /* Get startc/stopc flow */
> /* control characters */
> -#define DIGI_SETFLOW ('e'<<8) | 100 /* Set startc/stopc flow */
> +#define DIGI_SETFLOW (('e'<<8) | 100) /* Set startc/stopc flow */
> /* control characters */
> -#define DIGI_GETAFLOW ('e'<<8) | 101 /* Get Aux. startc/stopc */
> +#define DIGI_GETAFLOW (('e'<<8) | 101) /* Get Aux. startc/stopc */
> /* flow control chars */
> -#define DIGI_SETAFLOW ('e'<<8) | 102 /* Set Aux. startc/stopc */
> +#define DIGI_SETAFLOW (('e'<<8) | 102) /* Set Aux. startc/stopc */
> /* flow control chars */
>
> -#define DIGI_GEDELAY ('d'<<8) | 246 /* Get edelay */
> -#define DIGI_SEDELAY ('d'<<8) | 247 /* Set edelay */
> +#define DIGI_GEDELAY (('d'<<8) | 246) /* Get edelay */
> +#define DIGI_SEDELAY (('d'<<8) | 247) /* Set edelay */
>
> struct digiflow_t {
> unsigned char startc; /* flow cntl start char */
> @@ -104,8 +104,8 @@ struct digiflow_t {
>
>
> #ifdef FLOW_2200
> -#define F2200_GETA ('e'<<8) | 104 /* Get 2x36 flow cntl flags */
> -#define F2200_SETAW ('e'<<8) | 105 /* Set 2x36 flow cntl flags */
> +#define F2200_GETA (('e'<<8) | 104) /* Get 2x36 flow cntl flags */
> +#define F2200_SETAW (('e'<<8) | 105) /* Set 2x36 flow cntl flags */
> #define F2200_MASK 0x03 /* 2200 flow cntl bit mask */
> #define FCNTL_2200 0x01 /* 2x36 terminal flow cntl */
> #define PCNTL_2200 0x02 /* 2x36 printer flow cntl */
> @@ -241,7 +241,7 @@ struct digi_dinfo {
> char dinfo_version[16]; /* driver version */
> };
>
> -#define DIGI_GETDD ('d'<<8) | 248 /* get driver info */
> +#define DIGI_GETDD (('d'<<8) | 248) /* get driver info */
>
> /************************************************************************
> * Structure used with ioctl commands for per-board information
> @@ -261,7 +261,7 @@ struct digi_info {
> char info_reserved[7]; /* for future expansion */
> };
>
> -#define DIGI_GETBD ('d'<<8) | 249 /* get board info */
> +#define DIGI_GETBD (('d'<<8) | 249) /* get board info */
>
> struct digi_stat {
> unsigned int info_chan; /* Channel number (0 based) */
> @@ -276,7 +276,7 @@ struct digi_stat {
> unsigned int info_reserved[8]; /* for future expansion */
> };
>
> -#define DIGI_GETSTAT ('d'<<8) | 244 /* get board info */
> +#define DIGI_GETSTAT (('d'<<8) | 244) /* get board info */
> /************************************************************************
> *
> * Structure used with ioctl commands for per-channel information
> @@ -339,7 +339,7 @@ struct digi_getcounter {
> #define INFO_CH_WLOW 0x0020
> #define INFO_XXBUF_BUSY 0x0040
>
> -#define DIGI_GETCH ('d'<<8) | 245 /* get board info */
> +#define DIGI_GETCH (('d'<<8) | 245) /* get board info */
>
> /* Board type definitions */
>
> @@ -384,15 +384,15 @@ struct digi_getcounter {
> #define BD_TRIBOOT 0x8
> #define BD_BADKME 0x80
>
> -#define DIGI_SPOLL ('d'<<8) | 254 /* change poller rate */
> +#define DIGI_SPOLL (('d'<<8) | 254) /* change poller rate */
>
> #define DIGI_SETCUSTOMBAUD _IOW('e', 106, int) /* Set integer baud rate */
> #define DIGI_GETCUSTOMBAUD _IOR('e', 107, int) /* Get integer baud rate */
>
> -#define DIGI_REALPORT_GETBUFFERS ('e'<<8) | 108
> -#define DIGI_REALPORT_SENDIMMEDIATE ('e'<<8) | 109
> -#define DIGI_REALPORT_GETCOUNTERS ('e'<<8) | 110
> -#define DIGI_REALPORT_GETEVENTS ('e'<<8) | 111
> +#define DIGI_REALPORT_GETBUFFERS (('e'<<8) | 108)
> +#define DIGI_REALPORT_SENDIMMEDIATE (('e'<<8) | 109)
> +#define DIGI_REALPORT_GETCOUNTERS (('e'<<8) | 110)
> +#define DIGI_REALPORT_GETEVENTS (('e'<<8) | 111)
>
> #define EV_OPU 0x0001 /* !<Output paused by client */
> #define EV_OPS 0x0002 /* !<Output paused by reqular sw flowctrl */
> --
> 2.2.2
>
Ignore this patch please, one other file needs modification as well.
I will resubmit a new patch.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists