| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 20 Jan 2015 17:01:41 +0000
From: Lee Jones <lee.jones@...aro.org>
To: Bjorn Andersson <bjorn.andersson@...ymobile.com>
Cc: Rob Herring <robh+dt@...nel.org>, Mark Brown <broonie@...nel.org>,
Josh Cartwright <joshc@...eaurora.org>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH v8 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT
binding
On Wed, 26 Nov 2014, Bjorn Andersson wrote:
> Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
> 8960 and 8064 based devices.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...ymobile.com>
> ---
>
> Removed regulator definition from this patch, as these needs more discussion to
> be able to implement SoC assisted power save features of the Qualcomm
> platforms. No other changes.
>
> Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 70 ++++++++++
> include/dt-bindings/mfd/qcom-rpm.h | 154 +++++++++++++++++++++
> 2 files changed, 224 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> create mode 100644 include/dt-bindings/mfd/qcom-rpm.h
Applied, thanks.
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> new file mode 100644
> index 0000000..85e3198
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
> @@ -0,0 +1,70 @@
> +Qualcomm Resource Power Manager (RPM)
> +
> +This driver is used to interface with the Resource Power Manager (RPM) found in
> +various Qualcomm platforms. The RPM allows each component in the system to vote
> +for state of the system resources, such as clocks, regulators and bus
> +frequencies.
> +
> +- compatible:
> + Usage: required
> + Value type: <string>
> + Definition: must be one of:
> + "qcom,rpm-apq8064"
> + "qcom,rpm-msm8660"
> + "qcom,rpm-msm8960"
> +
> +- reg:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: base address and size of the RPM's message ram
> +
> +- interrupts:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: three entries specifying the RPM's:
> + 1. acknowledgement interrupt
> + 2. error interrupt
> + 3. wakeup interrupt
> +
> +- interrupt-names:
> + Usage: required
> + Value type: <string-array>
> + Definition: must be the three strings "ack", "err" and "wakeup", in order
> +
> +- #address-cells:
> + Usage: required
> + Value type: <u32>
> + Definition: must be 1
> +
> +- #size-cells:
> + Usage: required
> + Value type: <u32>
> + Definition: must be 0
> +
> +- qcom,ipc:
> + Usage: required
> + Value type: <prop-encoded-array>
> +
> + Definition: three entries specifying the outgoing ipc bit used for
> + signaling the RPM:
> + - phandle to a syscon node representing the apcs registers
> + - u32 representing offset to the register within the syscon
> + - u32 representing the ipc bit within the register
> +
> +
> += EXAMPLE
> +
> + #include <dt-bindings/mfd/qcom-rpm.h>
> +
> + rpm@...000 {
> + compatible = "qcom,rpm-msm8960";
> + reg = <0x108000 0x1000>;
> + qcom,ipc = <&apcs 0x8 2>;
> +
> + interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
> + interrupt-names = "ack", "err", "wakeup";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
> new file mode 100644
> index 0000000..388a6f3
> --- /dev/null
> +++ b/include/dt-bindings/mfd/qcom-rpm.h
> @@ -0,0 +1,154 @@
> +/*
> + * This header provides constants for the Qualcomm RPM bindings.
> + */
> +
> +#ifndef _DT_BINDINGS_MFD_QCOM_RPM_H
> +#define _DT_BINDINGS_MFD_QCOM_RPM_H
> +
> +/*
> + * Constants use to identify individual resources in the RPM.
> + */
> +#define QCOM_RPM_APPS_FABRIC_ARB 1
> +#define QCOM_RPM_APPS_FABRIC_CLK 2
> +#define QCOM_RPM_APPS_FABRIC_HALT 3
> +#define QCOM_RPM_APPS_FABRIC_IOCTL 4
> +#define QCOM_RPM_APPS_FABRIC_MODE 5
> +#define QCOM_RPM_APPS_L2_CACHE_CTL 6
> +#define QCOM_RPM_CFPB_CLK 7
> +#define QCOM_RPM_CXO_BUFFERS 8
> +#define QCOM_RPM_CXO_CLK 9
> +#define QCOM_RPM_DAYTONA_FABRIC_CLK 10
> +#define QCOM_RPM_DDR_DMM 11
> +#define QCOM_RPM_EBI1_CLK 12
> +#define QCOM_RPM_HDMI_SWITCH 13
> +#define QCOM_RPM_MMFPB_CLK 14
> +#define QCOM_RPM_MM_FABRIC_ARB 15
> +#define QCOM_RPM_MM_FABRIC_CLK 16
> +#define QCOM_RPM_MM_FABRIC_HALT 17
> +#define QCOM_RPM_MM_FABRIC_IOCTL 18
> +#define QCOM_RPM_MM_FABRIC_MODE 19
> +#define QCOM_RPM_PLL_4 20
> +#define QCOM_RPM_PM8058_LDO0 21
> +#define QCOM_RPM_PM8058_LDO1 22
> +#define QCOM_RPM_PM8058_LDO2 23
> +#define QCOM_RPM_PM8058_LDO3 24
> +#define QCOM_RPM_PM8058_LDO4 25
> +#define QCOM_RPM_PM8058_LDO5 26
> +#define QCOM_RPM_PM8058_LDO6 27
> +#define QCOM_RPM_PM8058_LDO7 28
> +#define QCOM_RPM_PM8058_LDO8 29
> +#define QCOM_RPM_PM8058_LDO9 30
> +#define QCOM_RPM_PM8058_LDO10 31
> +#define QCOM_RPM_PM8058_LDO11 32
> +#define QCOM_RPM_PM8058_LDO12 33
> +#define QCOM_RPM_PM8058_LDO13 34
> +#define QCOM_RPM_PM8058_LDO14 35
> +#define QCOM_RPM_PM8058_LDO15 36
> +#define QCOM_RPM_PM8058_LDO16 37
> +#define QCOM_RPM_PM8058_LDO17 38
> +#define QCOM_RPM_PM8058_LDO18 39
> +#define QCOM_RPM_PM8058_LDO19 40
> +#define QCOM_RPM_PM8058_LDO20 41
> +#define QCOM_RPM_PM8058_LDO21 42
> +#define QCOM_RPM_PM8058_LDO22 43
> +#define QCOM_RPM_PM8058_LDO23 44
> +#define QCOM_RPM_PM8058_LDO24 45
> +#define QCOM_RPM_PM8058_LDO25 46
> +#define QCOM_RPM_PM8058_LVS0 47
> +#define QCOM_RPM_PM8058_LVS1 48
> +#define QCOM_RPM_PM8058_NCP 49
> +#define QCOM_RPM_PM8058_SMPS0 50
> +#define QCOM_RPM_PM8058_SMPS1 51
> +#define QCOM_RPM_PM8058_SMPS2 52
> +#define QCOM_RPM_PM8058_SMPS3 53
> +#define QCOM_RPM_PM8058_SMPS4 54
> +#define QCOM_RPM_PM8821_LDO1 55
> +#define QCOM_RPM_PM8821_SMPS1 56
> +#define QCOM_RPM_PM8821_SMPS2 57
> +#define QCOM_RPM_PM8901_LDO0 58
> +#define QCOM_RPM_PM8901_LDO1 59
> +#define QCOM_RPM_PM8901_LDO2 60
> +#define QCOM_RPM_PM8901_LDO3 61
> +#define QCOM_RPM_PM8901_LDO4 62
> +#define QCOM_RPM_PM8901_LDO5 63
> +#define QCOM_RPM_PM8901_LDO6 64
> +#define QCOM_RPM_PM8901_LVS0 65
> +#define QCOM_RPM_PM8901_LVS1 66
> +#define QCOM_RPM_PM8901_LVS2 67
> +#define QCOM_RPM_PM8901_LVS3 68
> +#define QCOM_RPM_PM8901_MVS 69
> +#define QCOM_RPM_PM8901_SMPS0 70
> +#define QCOM_RPM_PM8901_SMPS1 71
> +#define QCOM_RPM_PM8901_SMPS2 72
> +#define QCOM_RPM_PM8901_SMPS3 73
> +#define QCOM_RPM_PM8901_SMPS4 74
> +#define QCOM_RPM_PM8921_CLK1 75
> +#define QCOM_RPM_PM8921_CLK2 76
> +#define QCOM_RPM_PM8921_LDO1 77
> +#define QCOM_RPM_PM8921_LDO2 78
> +#define QCOM_RPM_PM8921_LDO3 79
> +#define QCOM_RPM_PM8921_LDO4 80
> +#define QCOM_RPM_PM8921_LDO5 81
> +#define QCOM_RPM_PM8921_LDO6 82
> +#define QCOM_RPM_PM8921_LDO7 83
> +#define QCOM_RPM_PM8921_LDO8 84
> +#define QCOM_RPM_PM8921_LDO9 85
> +#define QCOM_RPM_PM8921_LDO10 86
> +#define QCOM_RPM_PM8921_LDO11 87
> +#define QCOM_RPM_PM8921_LDO12 88
> +#define QCOM_RPM_PM8921_LDO13 89
> +#define QCOM_RPM_PM8921_LDO14 90
> +#define QCOM_RPM_PM8921_LDO15 91
> +#define QCOM_RPM_PM8921_LDO16 92
> +#define QCOM_RPM_PM8921_LDO17 93
> +#define QCOM_RPM_PM8921_LDO18 94
> +#define QCOM_RPM_PM8921_LDO19 95
> +#define QCOM_RPM_PM8921_LDO20 96
> +#define QCOM_RPM_PM8921_LDO21 97
> +#define QCOM_RPM_PM8921_LDO22 98
> +#define QCOM_RPM_PM8921_LDO23 99
> +#define QCOM_RPM_PM8921_LDO24 100
> +#define QCOM_RPM_PM8921_LDO25 101
> +#define QCOM_RPM_PM8921_LDO26 102
> +#define QCOM_RPM_PM8921_LDO27 103
> +#define QCOM_RPM_PM8921_LDO28 104
> +#define QCOM_RPM_PM8921_LDO29 105
> +#define QCOM_RPM_PM8921_LVS1 106
> +#define QCOM_RPM_PM8921_LVS2 107
> +#define QCOM_RPM_PM8921_LVS3 108
> +#define QCOM_RPM_PM8921_LVS4 109
> +#define QCOM_RPM_PM8921_LVS5 110
> +#define QCOM_RPM_PM8921_LVS6 111
> +#define QCOM_RPM_PM8921_LVS7 112
> +#define QCOM_RPM_PM8921_MVS 113
> +#define QCOM_RPM_PM8921_NCP 114
> +#define QCOM_RPM_PM8921_SMPS1 115
> +#define QCOM_RPM_PM8921_SMPS2 116
> +#define QCOM_RPM_PM8921_SMPS3 117
> +#define QCOM_RPM_PM8921_SMPS4 118
> +#define QCOM_RPM_PM8921_SMPS5 119
> +#define QCOM_RPM_PM8921_SMPS6 120
> +#define QCOM_RPM_PM8921_SMPS7 121
> +#define QCOM_RPM_PM8921_SMPS8 122
> +#define QCOM_RPM_PXO_CLK 123
> +#define QCOM_RPM_QDSS_CLK 124
> +#define QCOM_RPM_SFPB_CLK 125
> +#define QCOM_RPM_SMI_CLK 126
> +#define QCOM_RPM_SYS_FABRIC_ARB 127
> +#define QCOM_RPM_SYS_FABRIC_CLK 128
> +#define QCOM_RPM_SYS_FABRIC_HALT 129
> +#define QCOM_RPM_SYS_FABRIC_IOCTL 130
> +#define QCOM_RPM_SYS_FABRIC_MODE 131
> +#define QCOM_RPM_USB_OTG_SWITCH 132
> +#define QCOM_RPM_VDDMIN_GPIO 133
> +
> +/*
> + * Constants used to select force mode for regulators.
> + */
> +#define QCOM_RPM_FORCE_MODE_NONE 0
> +#define QCOM_RPM_FORCE_MODE_LPM 1
> +#define QCOM_RPM_FORCE_MODE_HPM 2
> +#define QCOM_RPM_FORCE_MODE_AUTO 3
> +#define QCOM_RPM_FORCE_MODE_BYPASS 4
> +
> +#endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists