lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 21 Jan 2015 10:12:05 +0900
From:	Daniel Jeong <gshark.jeong@...il.com>
To:	Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
CC:	Mauro Carvalho Chehab <m.chehab@...sung.com>,
	Sakari Ailus <sakari.ailus@....fi>,
	Hans Verkuil <hans.verkuil@...co.com>,
	linux-kernel@...r.kernel.org, linux-media@...r.kernel.org
Subject: Re: [PATCH] media: i2c: add new driver for single string flash.

Hi.
> On Mon, 2015-01-19 at 17:25 +0900, Daniel Jeong wrote:
>> This patch adds the driver for the single string flash products of TI.
>> Several single string flash controllers of TI have similar register map
>> and bit data. This driver supports four products,lm3556, lm3561, lm3642
>> and lm3648.
> Why not to name it as lm3648 to be in align with other drivers?
I tried to match it with the above line. I will fix it.
>
> Or even better solution (I suppose) to create a "library" and on top of
> that one driver per each device?
>
> Sakari, what do you think?
Sakrai, I'd like to keep it but please let me know your opinion.
>> Signed-off-by: Daniel Jeong <gshark.jeong@...il.com>
>> ---
>>   drivers/media/i2c/Kconfig       |    9 +
>>   drivers/media/i2c/Makefile      |    1 +
>>   drivers/media/i2c/ti-ss-flash.c |  744 +++++++++++++++++++++++++++++++++++++++
>>   include/media/ti-ss-flash.h     |   33 ++
>>   4 files changed, 787 insertions(+)
>>   create mode 100644 drivers/media/i2c/ti-ss-flash.c
>>   create mode 100644 include/media/ti-ss-flash.h
>>
>> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
>> index 205d713..886c1fb 100644
>> --- a/drivers/media/i2c/Kconfig
>> +++ b/drivers/media/i2c/Kconfig
>> @@ -638,6 +638,15 @@ config VIDEO_LM3646
>>   	  This is a driver for the lm3646 dual flash controllers. It controls
>>   	  flash, torch LEDs.
>>   
>> +config VIDEO_TI_SS_FLASH
>> +	tristate "TI Single String Flash driver support"
>> +	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
>> +	depends on MEDIA_CAMERA_SUPPORT
>> +	select REGMAP_I2C
>> +	---help---
>> +	  This is a driver for the signle string flash controllers of TI.
>> +	  It supports LM3556, LM3561, LM3642 and LM3648.
>> +
>>   comment "Video improvement chips"
>>   
>>   config VIDEO_UPD64031A
>> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
>> index 98589001..0e523ec 100644
>> --- a/drivers/media/i2c/Makefile
>> +++ b/drivers/media/i2c/Makefile
>> @@ -73,6 +73,7 @@ obj-$(CONFIG_VIDEO_ADP1653)	+= adp1653.o
>>   obj-$(CONFIG_VIDEO_AS3645A)	+= as3645a.o
>>   obj-$(CONFIG_VIDEO_LM3560)	+= lm3560.o
>>   obj-$(CONFIG_VIDEO_LM3646)	+= lm3646.o
>> +obj-$(CONFIG_VIDEO_TI_SS_FLASH)	+= ti-ss-flash.o
>>   obj-$(CONFIG_VIDEO_SMIAPP_PLL)	+= smiapp-pll.o
>>   obj-$(CONFIG_VIDEO_AK881X)		+= ak881x.o
>>   obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
>> diff --git a/drivers/media/i2c/ti-ss-flash.c b/drivers/media/i2c/ti-ss-flash.c
>> new file mode 100644
>> index 0000000..035aeba
>> --- /dev/null
>> +++ b/drivers/media/i2c/ti-ss-flash.c
>> @@ -0,0 +1,744 @@
>> +/*
>> + * drivers/media/i2c/ti-ss-flash.c
>> + * General device driver for Single String FLASH LED Drivers of TI
>> + * It covers lm3556, lm3561, lm3642 and lm3648.
>> + *
>> + * Copyright (C) 2015 Texas Instruments
>> + *
>> + * Contact: Daniel Jeong <gshark.jeong@...il.com>
>> + *			Ldd-Mlp <ldd-mlp@...t.ti.com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * version 2 as published by the Free Software Foundation.
>> + *
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/i2c.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/regmap.h>
>> +#include <linux/slab.h>
>> +#include <linux/videodev2.h>
>> +#include <media/ti-ss-flash.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-device.h>
>> +
>> +/* operation mode */
>> +enum led_opmode {
>> +	OPMODE_SHDN = 0x0,
>> +	OPMODE_INDI_IR,
>> +	OPMODE_TORCH,
>> +	OPMODE_FLASH,
>> +};
>> +
>> +/*
>> + * register data
>> + * @reg : register
>> + * @mask : mask bits
>> + * @shift : bit shift of data
>> + */
>> +struct ctrl_reg {
>> +	unsigned int reg;
>> +	unsigned int mask;
>> +	unsigned int shift;
>> +};
>> +
>> +/*
>> + * unit data
>> + * @min : min value of brightness or timeout
>> + *        brightness : uA
>> + *		  timeout    : ms
>> + * @step : step value of brightness or timeout
>> + *        brightness : uA
>> + *		  timeout    : ms
>> + * @knee: knee point of step of brightness/timeout
>> + *        brightness : uA
>> + *		  timeout    : ms
>> + * @knee_step : step value of brightness or timeout after knee point
>> + *        brightness : uA
>> + *		  timeout    : ms
>> + * @max : max value of brightness or timeout
>> + *        brightness : uA
>> + *		  timeout    : ms
>> + * @ctrl : register info to control brightness or timeout
>> + */
>> +struct ssflash_config {
>> +	unsigned int min;
>> +	unsigned int step;
>> +	unsigned int knee;
>> +	unsigned int knee_step;
>> +	unsigned int max;
>> +	struct ctrl_reg ctrl;
>> +};
>> +
>> +/*
>> + * @reg : fault register
>> + * @mask : fault mask bit
>> + * @v4l2_fault : bit mapping to V4L2_FLASH_FAULT_
>> + *               refer to include//uapi/linux/v4l2-controls.h
>> + */
>> +struct ssflash_fault {
>> +	unsigned int reg;
>> +	unsigned int mask;
>> +	unsigned int v4l2_fault;
>> +};
>> +
>> +#define NUM_V4L2_FAULT 9
>> +
>> +/*
>> + * ssflash data
>> + * @name: device name
>> + * @mode: operation mode control data
>> + * @flash_br: flash brightness register and bit data
>> + * @timeout: timeout control data
>> + * @strobe: strobe control data
>> + * @torch_br: torch brightness register and bit data
>> + * @fault: fault data
>> + * @func: initialize function
>> + */
>> +struct ssflash_data {
>> +	char *name;
>> +	struct ctrl_reg mode;
>> +	struct ssflash_config flash_br;
>> +	struct ssflash_config timeout;
>> +	struct ctrl_reg strobe;
>> +
>> +	struct ssflash_config torch_br;
>> +	struct ssflash_fault fault[NUM_V4L2_FAULT];
>> +
>> +	int (*func)(struct regmap *regmap);
>> +};
>> +
>> +/*
>> + * struct ssflash_flash
>> + * @dev: device
>> + * @regmap: reg map for interface
>> + * @ctrls_led: V4L2 contols
>> + * @subdev_led: V4L2 subdev
>> + * @data : chip control data
>> + * @mode_reg: value of mode register
>> + */
>> +struct ssflash_flash {
>> +	struct device *dev;
>> +	struct regmap *regmap;
>> +
>> +	struct v4l2_ctrl_handler ctrls_led;
>> +	struct v4l2_subdev subdev_led;
>> +	const struct ssflash_data *data;
>> +	u8 mode_reg;
>> +};
>> +
>> +#define to_ssflash_flash(_ctrl)	\
>> +	container_of(_ctrl->handler, struct ssflash_flash, ctrls_led)
>> +
>> +static const struct ssflash_data flash_lm3556 = {
>> +	.name = LM3556_NAME,
>> +	.mode = {
>> +		.reg = 0x0a, .mask = 0x03, .shift = 0
>> +	},
>> +	.flash_br = {
>> +		.min = 93750, .step = 93750,
>> +		.max = 1500000,
>> +		.ctrl = {
>> +			.reg = 0x09, .mask = 0xf, .shift = 0
>> +		},
>> +	},
>> +	.timeout = {
>> +		.min = 100,	.step = 100,
>> +		.max = 800,
>> +		.ctrl = {
>> +			.reg = 0x08, .mask = 0x07, .shift = 0
>> +		}
>> +	},
>> +	.torch_br = {
>> +		.min = 46880, .step = 46880,
>> +		.max = 375000,
>> +		.ctrl = {
>> +			.reg = 0x09, .mask = 0x70, .shift = 4
>> +		}
>> +	},
>> +	.strobe = {
>> +		.reg = 0x0a, .mask = 0x20, .shift = 5
>> +	},
>> +	.fault = {
>> +		[0] = {
>> +			.reg = 0x0b, .mask = 0x01,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_TIMEOUT,
>> +		},
>> +		[1] = {
>> +			.reg = 0x0b, .mask = 0x02,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_OVER_TEMPERATURE,
>> +		},
>> +		[2] = {
>> +			.reg = 0x0b, .mask = 0x04,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_SHORT_CIRCUIT,
>> +		},
>> +		[3] = {
>> +			.reg = 0x0b, .mask = 0x08,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_OVER_VOLTAGE,
>> +		},
>> +
>> +		[4] = {
>> +			.reg = 0x0b, .mask = 0x10,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_UNDER_VOLTAGE,
>> +		},
>> +		[5] = {
>> +			.reg = 0x0b, .mask = 0x20,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_INPUT_VOLTAGE,
>> +		},
>> +	},
>> +	.func = NULL
>> +};
>> +
>> +static const struct ssflash_data flash_lm3561 = {
>> +	.name = LM3561_NAME,
>> +	.mode = {
>> +		.reg = 0x10, .mask = 0x03, .shift = 0
>> +	},
>> +	.flash_br = {
>> +		.min = 36000, .step = 37600,
>> +		.max = 600000,
>> +		.ctrl = {
>> +			.reg = 0xb0, .mask = 0xf, .shift = 0
>> +		},
>> +	},
>> +	.timeout = {
>> +		.min = 32,	.step = 32,
>> +		.max = 1024,
>> +		.ctrl = {
>> +			.reg = 0xc0, .mask = 0x1f, .shift = 0
>> +		}
>> +	},
>> +	.torch_br = {
>> +		.min = 18000, .step = 18800,
>> +		.max = 149600,
>> +		.ctrl = {
>> +			.reg = 0xa0, .mask = 0x07, .shift = 0
>> +		}
>> +	},
>> +	.strobe = {
>> +		.reg = 0xe0, .mask = 0x04, .shift = 2
>> +	},
>> +	.fault = {
>> +		[0] = {
>> +			.reg = 0xd0, .mask = 0x01,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_TIMEOUT,
>> +		},
>> +		[1] = {
>> +			.reg = 0xd0, .mask = 0x02,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_OVER_TEMPERATURE,
>> +		},
>> +		[2] = {
>> +			.reg = 0xd0, .mask = 0x04,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_SHORT_CIRCUIT,
>> +		},
>> +		[3] = {
>> +			.reg = 0xd0, .mask = 0x20,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE,
>> +		},
>> +		[4] = {
>> +			.reg = 0xd0, .mask = 0x80,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_INPUT_VOLTAGE,
>> +		},
>> +	},
>> +	.func = NULL
>> +};
>> +
>> +static const struct ssflash_data flash_lm3642 = {
>> +	.name = LM3642_NAME,
>> +	.mode = {
>> +		.reg = 0x0a, .mask = 0x03, .shift = 0
>> +	},
>> +	.flash_br = {
>> +		.min = 93750, .step = 93750,
>> +		.max = 1500000,
>> +		.ctrl = {
>> +			.reg = 0x09, .mask = 0xf, .shift = 0
>> +		},
>> +	},
>> +	.timeout = {
>> +		.min = 100,	.step = 100,
>> +		.max = 800,
>> +		.ctrl = {
>> +			.reg = 0x08, .mask = 0x07, .shift = 0
>> +		}
>> +	},
>> +	.torch_br = {
>> +		.min = 46880, .step = 46880,
>> +		.max = 375000,
>> +		.ctrl = {
>> +			.reg = 0x09, .mask = 0x70, .shift = 4
>> +		}
>> +	},
>> +	.strobe = {
>> +		.reg = 0x0a, .mask = 0x20, .shift = 5
>> +	},
>> +	.fault = {
>> +		[0] = {
>> +			.reg = 0x0b, .mask = 0x01,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_TIMEOUT,
>> +		},
>> +		[1] = {
>> +			.reg = 0x0b, .mask = 0x02,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_OVER_TEMPERATURE,
>> +		},
>> +		[2] = {
>> +			.reg = 0x0b, .mask = 0x04,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_SHORT_CIRCUIT,
>> +		},
>> +		[3] = {
>> +			.reg = 0x0b, .mask = 0x20,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_INPUT_VOLTAGE,
>> +		},
>> +	},
>> +	.func = NULL
>> +};
>> +
>> +static int ssflash_lm3648_init(struct regmap *regmap)
>> +{
>> +	int rval;
>> +
>> +	/* enable LED */
>> +	rval = regmap_update_bits(regmap, 0x01, 0x03, 0x03);
>> +	/* bit[7:6] must be set to 10b for proper operation */
>> +	rval |= regmap_update_bits(regmap, 0x03, 0xc0, 0x80);
>> +	/* bit[7] must be set to 1b for proper operation */
>> +	rval |= regmap_update_bits(regmap, 0x05, 0x80, 0x80);
>> +	if (rval < 0)
>> +		return rval;
>> +	return 0;
>> +}
>> +
>> +static const struct ssflash_data flash_lm3648 = {
>> +	.name = LM3648_NAME,
>> +	.mode = {
>> +		.reg = 0x01, .mask = 0x0c, .shift = 2
>> +	},
>> +	.flash_br = {
>> +		.min = 21800, .step = 23450,
>> +		.max = 1500000,
>> +		.ctrl = {
>> +			.reg = 0x03, .mask = 0x3f, .shift = 0
>> +		},
>> +	},
>> +	.timeout = {
>> +		.min = 10,	.step = 10,
>> +		.knee = 100, .knee_step = 50,
>> +		.max = 1024,
>> +		.ctrl = {
>> +			.reg = 0x08, .mask = 0x0f, .shift = 0
>> +		}
>> +	},
>> +	.torch_br = {
>> +		.min = 1954, .step = 2800,
>> +		.max = 357600,
>> +		.ctrl = {
>> +			.reg = 0x5, .mask = 0x7f, .shift = 0
>> +		}
>> +	},
>> +	.strobe = {
>> +		.reg = 0x1, .mask = 0x20, .shift = 5
>> +	},
>> +	.fault = {
>> +		[0] = {
>> +			.reg = 0x0a, .mask = 0x01,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_TIMEOUT,
>> +		},
>> +		[1] = {
>> +			.reg = 0x0a, .mask = 0x04,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_OVER_TEMPERATURE,
>> +		},
>> +		[2] = {
>> +			.reg = 0x0a, .mask = 0x70,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_SHORT_CIRCUIT,
>> +		},
>> +		[3] = {
>> +			.reg = 0x0b, .mask = 0x04,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_INPUT_VOLTAGE,
>> +		},
>> +		[4] = {
>> +			.reg = 0x0b, .mask = 0x01,
>> +			.v4l2_fault = V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE,
>> +		},
>> +	},
>> +	.func = ssflash_lm3648_init
>> +};
>> +
>> +static u8 ssflash_conv_val_to_reg(unsigned int val,
>> +	unsigned int min, unsigned int step,
>> +	unsigned int knee, unsigned int knee_step,
>> +	unsigned int max)
>> +{
>> +	if (val >= max)
>> +		return 0xff;
>> +
>> +	if (knee <= min)
>> +		return (u8)(val < min ? 0 : (val - min)/step);
>> +	return (u8)val < min ? 0 :
>> +			(val < knee ? (val-min)/step :
>> +				(val-knee)/knee_step + (knee-min)/step);
>> +}
>> +
>> +/* mode control */
>> +static int ssflash_mode_ctrl(struct ssflash_flash *flash,
>> +			    enum v4l2_flash_led_mode v4l_led_mode)
>> +{
>> +	const struct ssflash_data *data = flash->data;
>> +	enum led_opmode opmode;
>> +
>> +	switch (v4l_led_mode) {
>> +	case V4L2_FLASH_LED_MODE_NONE:
>> +		opmode = OPMODE_SHDN;
>> +	break;
>> +	case V4L2_FLASH_LED_MODE_TORCH:
>> +		opmode = OPMODE_TORCH;
>> +	break;
>> +	case V4L2_FLASH_LED_MODE_FLASH:
>> +		opmode = OPMODE_FLASH;
>> +	break;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +	return regmap_update_bits(flash->regmap, data->mode.reg,
>> +				data->mode.mask, opmode << data->mode.shift);
>> +}
>> +
>> +/* torch brightness control */
>> +static int ssflash_torch_brt_ctrl
>> +	(struct ssflash_flash *flash, unsigned int brt)
>> +{
>> +	const struct ssflash_data *data = flash->data;
>> +	int rval;
>> +	u8 br_bits;
>> +
>> +	br_bits = ssflash_conv_val_to_reg(brt,
>> +				data->torch_br.min, data->torch_br.step,
>> +				data->torch_br.knee, data->torch_br.knee_step,
>> +				data->torch_br.max);
>> +
>> +	rval = regmap_update_bits(flash->regmap,
>> +			data->torch_br.ctrl.reg,
>> +			data->torch_br.ctrl.mask,
>> +			br_bits << data->torch_br.ctrl.shift);
>> +
>> +	return rval;
>> +}
>> +
>> +/* flash brightness control */
>> +static int ssflash_flash_brt_ctrl(struct ssflash_flash *flash,
>> +				 unsigned int brt)
>> +{
>> +	const struct ssflash_data *data = flash->data;
>> +	int rval;
>> +	u8 br_bits;
>> +
>> +	br_bits = ssflash_conv_val_to_reg(brt,
>> +					data->flash_br.min,
>> +					data->flash_br.step,
>> +					data->flash_br.knee,
>> +					data->flash_br.knee_step,
>> +					data->flash_br.max);
>> +
>> +	rval = regmap_update_bits(flash->regmap,
>> +				data->flash_br.ctrl.reg,
>> +				data->flash_br.ctrl.mask,
>> +				br_bits << data->flash_br.ctrl.shift);
>> +
>> +	return rval;
>> +}
>> +
>> +/* fault status */
>> +static int ssflash_get_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> +	struct ssflash_flash *flash = to_ssflash_flash(ctrl);
>> +	const struct ssflash_data *data = flash->data;
>> +	int rval = -EINVAL;
>> +
>> +	if (ctrl->id == V4L2_CID_FLASH_FAULT) {
>> +		int icnt;
>> +		s32 fault = 0;
>> +		unsigned int reg_val;
>> +		unsigned int reg = 0xfff;
>> +
>> +		for (icnt = 0; icnt < NUM_V4L2_FAULT; icnt++) {
>> +			if (data->fault[icnt].mask == 0x0)
>> +				continue;
>> +			if (data->fault[icnt].reg != reg) {
>> +				reg = data->fault[icnt].reg;
>> +				rval = regmap_read(
>> +						flash->regmap, reg, &reg_val);
>> +				if (rval < 0)
>> +					goto out;
>> +			}
>> +			if (rval & data->fault[icnt].mask)
>> +				fault |= data->fault[icnt].v4l2_fault;
>> +		}
>> +		ctrl->cur.val = fault;
>> +	}
>> +
>> +out:
>> +	return rval;
>> +}
>> +
>> +static int ssflash_set_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> +	struct ssflash_flash *flash = to_ssflash_flash(ctrl);
>> +	const struct ssflash_data *data = flash->data;
>> +	u8 tout_bits;
>> +	unsigned int reg_val;
>> +	int rval = -EINVAL;
>> +
>> +	switch (ctrl->id) {
>> +	case V4L2_CID_FLASH_LED_MODE:
>> +		if (ctrl->val != V4L2_FLASH_LED_MODE_FLASH)
>> +			return ssflash_mode_ctrl(flash, ctrl->val);
>> +		/* switch to SHDN mode before flash strobe on */
>> +		return ssflash_mode_ctrl(flash, V4L2_FLASH_LED_MODE_NONE);
>> +
>> +	case V4L2_CID_FLASH_TORCH_INTENSITY:
>> +		return ssflash_torch_brt_ctrl(flash, ctrl->val);
>> +
>> +	case V4L2_CID_FLASH_INTENSITY:
>> +		return ssflash_flash_brt_ctrl(flash, ctrl->val);
>> +
>> +	case V4L2_CID_FLASH_STROBE_SOURCE:
>> +		return regmap_update_bits(flash->regmap,
>> +					data->strobe.reg, data->strobe.mask,
>> +					(ctrl->val) << data->strobe.shift);
>> +
>> +	case V4L2_CID_FLASH_STROBE:
>> +		/* read and check current mode of chip to start flash */
>> +		rval = regmap_read(flash->regmap, data->mode.reg, &reg_val);
>> +		if (rval < 0 ||
>> +				(((reg_val & data->mode.mask)>>data->mode.shift)
>> +				!= OPMODE_SHDN))
>> +			return rval;
>> +		/* flash on */
>> +		return ssflash_mode_ctrl(flash,
>> +					V4L2_FLASH_LED_MODE_FLASH);
>> +
>> +	case V4L2_CID_FLASH_STROBE_STOP:
>> +		/*
>> +		 * flash mode will be turned automatically
>> +		 * from FLASH mode to SHDN mode after flash duration timeout
>> +		 * read and check current mode of chip to stop flash
>> +		 */
>> +		rval = regmap_read(flash->regmap, data->mode.reg, &reg_val);
>> +		if (rval < 0)
>> +			return rval;
>> +		if (((reg_val & data->mode.mask)
>> +				>> data->mode.shift) == OPMODE_FLASH)
>> +			return ssflash_mode_ctrl(flash,
>> +						V4L2_FLASH_LED_MODE_NONE);
>> +		return rval;
>> +
>> +	case V4L2_CID_FLASH_TIMEOUT:
>> +		tout_bits = ssflash_conv_val_to_reg(ctrl->val,
>> +						data->timeout.min,
>> +						data->timeout.step,
>> +						data->timeout.knee,
>> +						data->timeout.knee_step,
>> +						data->timeout.max);
>> +
>> +		return regmap_update_bits(flash->regmap,
>> +					data->timeout.ctrl.reg,
>> +					data->timeout.ctrl.mask,
>> +					tout_bits << data->timeout.ctrl.shift);
>> +	}
>> +
>> +	return rval;
>> +}
>> +
>> +static int ssflash_led_get_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> +	return ssflash_get_ctrl(ctrl);
>> +}
>> +
>> +static int ssflash_led_set_ctrl(struct v4l2_ctrl *ctrl)
>> +{
>> +	return ssflash_set_ctrl(ctrl);
>> +}
>> +
>> +static const struct v4l2_ctrl_ops ssflash_led_ctrl_ops = {
>> +	 .g_volatile_ctrl = ssflash_led_get_ctrl,
>> +	 .s_ctrl = ssflash_led_set_ctrl,
>> +};
>> +
>> +static int ssflash_init_controls(struct ssflash_flash *flash)
>> +{
>> +	struct v4l2_ctrl *fault;
>> +	struct v4l2_ctrl_handler *hdl = &flash->ctrls_led;
>> +	const struct v4l2_ctrl_ops *ops = &ssflash_led_ctrl_ops;
>> +	const struct ssflash_data *data = flash->data;
>> +	s64 fault_max = 0;
>> +	int icnt;
>> +
>> +	v4l2_ctrl_handler_init(hdl, 8);
>> +	/* flash mode */
>> +	v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_LED_MODE,
>> +			       V4L2_FLASH_LED_MODE_TORCH, ~0x7,
>> +			       V4L2_FLASH_LED_MODE_NONE);
>> +	/* flash source */
>> +	v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_STROBE_SOURCE,
>> +			       0x1, ~0x3, V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
>> +	/* flash strobe */
>> +	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
>> +	/* flash strobe stop */
>> +	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
>> +	/* flash strobe timeout */
>> +	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TIMEOUT,
>> +			  data->timeout.min,
>> +			  data->timeout.max,
>> +			  data->timeout.step,
>> +			  data->timeout.max);
>> +	/* flash brt */
>> +	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_INTENSITY,
>> +			  data->flash_br.min,
>> +			  data->flash_br.max,
>> +			  data->flash_br.step,
>> +			  data->flash_br.max);
>> +	/* torch brt */
>> +	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TORCH_INTENSITY,
>> +			  data->torch_br.min,
>> +			  data->torch_br.max,
>> +			  data->torch_br.step,
>> +			  data->torch_br.max);
>> +	/* fault */
>> +	for (icnt = 0; icnt < NUM_V4L2_FAULT; icnt++)
>> +		fault_max |= data->fault[icnt].v4l2_fault;
>> +	fault = v4l2_ctrl_new_std(hdl,
>> +				ops, V4L2_CID_FLASH_FAULT, 0, fault_max, 0, 0);
>> +	if (fault != NULL)
>> +		fault->flags |= V4L2_CTRL_FLAG_VOLATILE;
>> +
>> +	if (hdl->error)
>> +		return hdl->error;
>> +
>> +	flash->subdev_led.ctrl_handler = hdl;
>> +	return 0;
>> +}
>> +
>> +/* initialize device */
>> +static const struct v4l2_subdev_ops ssflash_ops = {
>> +	.core = NULL,
>> +};
>> +
>> +static const struct regmap_config ssflash_regmap = {
>> +	.reg_bits = 8,
>> +	.val_bits = 8,
>> +	.max_register = 0xff,
>> +};
>> +
>> +static int ssflash_subdev_init(struct ssflash_flash *flash)
>> +{
>> +	struct i2c_client *client = to_i2c_client(flash->dev);
>> +	int rval;
>> +
>> +	v4l2_i2c_subdev_init(&flash->subdev_led, client, &ssflash_ops);
>> +	flash->subdev_led.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>> +	strcpy(flash->subdev_led.name, flash->data->name);
>> +
>> +	rval = ssflash_init_controls(flash);
>> +	if (rval)
>> +		goto err_out;
>> +
>> +	rval = media_entity_init(&flash->subdev_led.entity, 0, NULL, 0);
>> +	if (rval < 0)
>> +		goto err_out;
>> +
>> +	flash->subdev_led.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH;
>> +	return rval;
>> +
>> +err_out:
>> +	v4l2_ctrl_handler_free(&flash->ctrls_led);
>> +	return rval;
>> +}
>> +
>> +static int ssflash_init_device(struct ssflash_flash *flash)
>> +{
>> +	int rval;
>> +
>> +	/* output disable */
>> +	rval = ssflash_mode_ctrl(flash, V4L2_FLASH_LED_MODE_NONE);
>> +	if (rval < 0)
>> +		return rval;
>> +
>> +	if (flash->data->func != NULL) {
>> +		rval = flash->data->func(flash->regmap);
>> +		if (rval < 0)
>> +			return rval;
>> +	}
>> +
>> +	return rval;
>> +}
>> +
>> +static int ssflash_probe(struct i2c_client *client,
>> +			const struct i2c_device_id *devid)
>> +{
>> +	struct ssflash_flash *flash;
>> +	int rval;
>> +
>> +	flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
>> +	if (flash == NULL)
>> +		return -ENOMEM;
>> +
>> +	flash->regmap = devm_regmap_init_i2c(client, &ssflash_regmap);
>> +	if (IS_ERR(flash->regmap)) {
>> +		rval = PTR_ERR(flash->regmap);
>> +		return rval;
>> +	}
>> +
>> +	flash->dev = &client->dev;
>> +	flash->data = (const struct ssflash_data *)devid->driver_data;
>> +
>> +	rval = ssflash_subdev_init(flash);
>> +	if (rval < 0)
>> +		return rval;
>> +
>> +	rval = ssflash_init_device(flash);
>> +	if (rval < 0)
>> +		return rval;
>> +
>> +	i2c_set_clientdata(client, flash);
>> +
>> +	return 0;
>> +}
>> +
>> +static int ssflash_remove(struct i2c_client *client)
>> +{
>> +	struct ssflash_flash *flash = i2c_get_clientdata(client);
>> +
>> +	v4l2_device_unregister_subdev(&flash->subdev_led);
>> +	v4l2_ctrl_handler_free(&flash->ctrls_led);
>> +	media_entity_cleanup(&flash->subdev_led.entity);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct i2c_device_id ssflash_id_table[] = {
>> +	{LM3556_NAME, (unsigned long)&flash_lm3556},
>> +	{LM3561_NAME, (unsigned long)&flash_lm3561},
>> +	{LM3642_NAME, (unsigned long)&flash_lm3642},
>> +	{LM3648_NAME, (unsigned long)&flash_lm3648},
>> +	{}
>> +};
>> +
>> +MODULE_DEVICE_TABLE(i2c, ssflash_id_table);
>> +
>> +static struct i2c_driver ssflash_i2c_driver = {
>> +	.driver = {
>> +		.name = SINGLE_STRING_FLASH_NAME,
>> +	},
>> +	.probe = ssflash_probe,
>> +	.remove = ssflash_remove,
>> +	.id_table = ssflash_id_table,
>> +};
>> +
>> +module_i2c_driver(ssflash_i2c_driver);
>> +
>> +MODULE_AUTHOR("Daniel Jeong <gshark.jeong@...il.com>");
>> +MODULE_AUTHOR("Ldd Mlp <ldd-mlp@...t.ti.com>");
>> +MODULE_DESCRIPTION("Texas Instruments single string LED flash driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/include/media/ti-ss-flash.h b/include/media/ti-ss-flash.h
>> new file mode 100644
>> index 0000000..505b33f
>> --- /dev/null
>> +++ b/include/media/ti-ss-flash.h
>> @@ -0,0 +1,33 @@
>> +/*
>> + * include/media/ti-ss-flash.h
>> + *
>> + * Copyright (C) 2014 Texas Instruments
>> + *
>> + * Contact: Daniel Jeong <gshark.jeong@...il.com>
>> + *			Ldd-Mlp <ldd-mlp@...t.ti.com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * version 2 as published by the Free Software Foundation.
>> + */
>> +
>> +#ifndef __TI_SS_FLASH_H__
>> +#define __TI_SS_FLASH_H__
>> +
>> +#include <media/v4l2-subdev.h>
>> +
>> +#define LM3556_NAME "lm3556"
>> +#define LM3556_I2C_ADDR	(0x63)
>> +
>> +#define LM3561_NAME "lm3561"
>> +#define LM3561_I2C_ADDR	(0x53)
>> +
>> +#define LM3642_NAME "lm3642"
>> +#define LM3642_I2C_ADDR	(0x63)
>> +
>> +#define LM3648_NAME "lm3648"
>> +#define LM3648_I2C_ADDR	(0x63)
>> +
>> +#define SINGLE_STRING_FLASH_NAME	"ti_ss_flash"
>> +
>> +#endif /* __TI_SS_FLASH_H__ */
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ