| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJKOXPdWTE6CQC57oV5vsz4TNK4H8==ehpd=3OOMYnJRW+ifWw@mail.gmail.com>
Date: Fri, 23 Jan 2015 08:18:41 +0100
From: Krzysztof Kozłowski <k.kozlowski.k@...il.com>
To: Jaewon Kim <jaewon02.kim@...sung.com>
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-pm@...r.kernel.org, Inki Dae <inki.dae@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Lee Jones <lee.jones@...aro.org>,
Chanwoo Choi <cw00.choi@...sung.com>,
Sebastian Reichel <sre@...nel.org>,
Mark Brown <broonie@...nel.org>,
Beomho Seo <beomho.seo@...sung.com>
Subject: Re: [PATCH 5/6] regulator: max77843: Add max77843 regulator driver
2015-01-23 6:02 GMT+01:00 Jaewon Kim <jaewon02.kim@...sung.com>:
> This patch adds new regulator driver to support max77843
> MFD(Multi Function Device) chip`s regulators.
> The Max77843 has two voltage regulators for USB safeout.
>
> Cc: Mark Brown <broonie@...nel.org>
> Signed-off-by: Beomho Seo <beomho.seo@...sung.com>
> Signed-off-by: Jaewon Kim <jaewon02.kim@...sung.com>
> ---
> drivers/regulator/Kconfig | 8 ++
> drivers/regulator/Makefile | 1 +
> drivers/regulator/max77843.c | 259 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 268 insertions(+)
> create mode 100644 drivers/regulator/max77843.c
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index c3a60b5..c1f9c33 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -414,6 +414,14 @@ config REGULATOR_MAX77802
> Exynos5420/Exynos5800 SoCs to control various voltages.
> It includes support for control of voltage and ramp speed.
>
> +config REGULATOR_MAX77843
> + tristate "Maxim 77843 regulator"
> + depends on MFD_MAX77843
> + help
> + This driver controls a Maxim 77843 regulator.
> + The regulator include two 'SAFEOUT' for USB(Universal Serial Bus)
> + This is suitable for Exynos5433 SoC chips.
> +
> config REGULATOR_MC13XXX_CORE
> tristate
>
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 1f28ebf..12408d6 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -55,6 +55,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
> obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
> obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
> obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
> +obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o
> obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
> obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
> obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
> diff --git a/drivers/regulator/max77843.c b/drivers/regulator/max77843.c
> new file mode 100644
> index 0000000..86afc7a
> --- /dev/null
> +++ b/drivers/regulator/max77843.c
> @@ -0,0 +1,259 @@
> +/*
> + * max77843.c - Regulator driver for the Maxim MAX77843
> + *
> + * Copyright (C) 2014 Samsung Electrnoics
> + * Author: Jaewon Kim <jaewon02.kim@...sung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/mfd/max77843-private.h>
> +#include <linux/regulator/of_regulator.h>
> +
> +#define MAX77843_SUPPORTED_VOLTAGE_NUM 4
> +
> +enum max77843_regulator_type {
> + MAX77843_SAFEOUT1 = 0,
> + MAX77843_SAFEOUT2,
> + MAX77843_CHARGER,
> +
> + MAX77843_NUM,
> +};
> +
> +static const unsigned int max77843_regulator_table[] = {
> + 4850000,
> + 4900000,
> + 4950000,
> + 3300000,
> +};
> +
> +static int max77843_reg_is_enabled(struct regulator_dev *rdev)
> +{
> + struct regmap *regmap = rdev->regmap;
> + int ret;
> + unsigned int reg;
> +
> + ret = regmap_read(regmap, rdev->desc->enable_reg, ®);
> + if (ret) {
> + dev_err(&rdev->dev, "Fialed to read charger register\n");
> + return ret;
> + }
> +
> + return (reg & rdev->desc->enable_mask) == rdev->desc->enable_mask;
> +}
> +
> +static int max77843_reg_get_current_limit(struct regulator_dev *rdev)
> +{
> + struct regmap *regmap = rdev->regmap;
> + unsigned int chg_min_uA = rdev->constraints->min_uA;
> + unsigned int chg_max_uA = rdev->constraints->max_uA;
> + unsigned int val;
> + int ret;
> + unsigned int reg, sel;
> +
> + ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_02, ®);
> + if (ret) {
> + dev_err(&rdev->dev, "Failed to read charger register\n");
> + return ret;
> + }
> +
> + sel = reg & MAX77843_CHG_FAST_CHG_CURRENT_MASK;
> +
> + if (sel < 0x03)
> + sel = 0;
> + else
> + sel -= 2;
> +
> + val = chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel;
> + if (val > chg_max_uA)
> + return -EINVAL;
> +
> + return val;
> +}
> +
> +static int max77843_reg_set_current_limit(struct regulator_dev *rdev,
> + int min_uA, int max_uA)
> +{
> + struct regmap *regmap = rdev->regmap;
> + unsigned int chg_min_uA = rdev->constraints->min_uA;
> + int sel = 0;
> +
> + while (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel < min_uA)
> + sel++;
> +
> + if (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel > max_uA)
> + return -EINVAL;
> +
> + sel += 2;
> +
> + return regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_02, sel);
> +}
> +
> +static struct regulator_ops max77843_charger_ops = {
> + .is_enabled = max77843_reg_is_enabled,
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .get_current_limit = max77843_reg_get_current_limit,
> + .set_current_limit = max77843_reg_set_current_limit,
> +};
> +
> +static struct regulator_ops max77843_regulator_ops = {
> + .is_enabled = regulator_is_enabled_regmap,
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .list_voltage = regulator_list_voltage_table,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> +};
> +
> +static const struct regulator_desc max77843_supported_regulators[] = {
> + [MAX77843_SAFEOUT1] = {
> + .name = "SAFEOUT1",
> + .id = MAX77843_SAFEOUT1,
> + .ops = &max77843_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + .n_voltages = MAX77843_SUPPORTED_VOLTAGE_NUM,
> + .volt_table = max77843_regulator_table,
> + .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
> + .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1,
> + .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
> + .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK,
> + },
> + [MAX77843_SAFEOUT2] = {
> + .name = "SAFEOUT2",
> + .id = MAX77843_SAFEOUT2,
> + .ops = &max77843_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .owner = THIS_MODULE,
> + .n_voltages = MAX77843_SUPPORTED_VOLTAGE_NUM,
> + .volt_table = max77843_regulator_table,
> + .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
> + .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2,
> + .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
> + .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK,
> + },
> + [MAX77843_CHARGER] = {
> + .name = "CHARGER",
> + .id = MAX77843_CHARGER,
> + .ops = &max77843_charger_ops,
> + .type = REGULATOR_CURRENT,
> + .owner = THIS_MODULE,
> + .enable_reg = MAX77843_CHG_REG_CHG_CNFG_00,
> + .enable_mask = MAX77843_CHG_MASK,
> + },
> +};
> +
> +static struct of_regulator_match max77843_regulator_matches[] = {
> + { .name = "SAFEOUT1", },
> + { .name = "SAFEOUT2", },
> + { .name = "CHARGER", },
> +};
> +
> +static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id)
> +{
> + switch (reg_id) {
> + case MAX77843_SAFEOUT1:
> + case MAX77843_SAFEOUT2:
> + return max77843->regmap;
> + case MAX77843_CHARGER:
> + return max77843->regmap_chg;
> + default:
> + return max77843->regmap;
> + }
> +}
> +
> +static int max77843_regulator_dt_parse(struct platform_device *pdev)
> +{
> + struct device_node *np;
> + int ret;
> +
> + np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
> + if (!np) {
> + dev_err(&pdev->dev,
> + "Cannot get child OF node for regulators\n");
> + return -EINVAL;
> + }
> +
> + ret = of_regulator_match(&pdev->dev, np, max77843_regulator_matches,
> + ARRAY_SIZE(max77843_regulator_matches));
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Cannot parsing regulator init data\n");
> + return ret;
> + }
> +
> + of_node_put(np);
> +
> + return 0;
Use simplified DT parsing method (of_match and regulators_node from
regulators_desc). This function could be removed then.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists