| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 23 Jan 2015 15:23:23 +0800
From: Lyra Zhang <zhang.lyra@...il.com>
To: Peter Hurley <peter@...leysoftware.com>
Cc: Chunyan Zhang <chunyan.zhang@...eadtrum.com>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Arnd Bergmann <arnd@...db.de>,
"gnomes@...rguk.ukuu.org.uk" <gnomes@...rguk.ukuu.org.uk>,
Shawn Guo <shawn.guo@...aro.org>,
Pawel Moll <pawel.moll@....com>,
"ijc+devicetree@...lion.org.uk" <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
"jslaby@...e.cz" <jslaby@...e.cz>,
Grant Likely <grant.likely@...aro.org>,
Heiko Stübner <heiko@...ech.de>,
"jason@...edaemon.net" <jason@...edaemon.net>,
"florian.vaussard@...l.ch" <florian.vaussard@...l.ch>,
"andrew@...n.ch" <andrew@...n.ch>,
Hayato Suzuki <hytszk@...il.com>,
"antonynpavlov@...il.com" <antonynpavlov@...il.com>,
Orson Zhai <orsonzhai@...il.com>,
"geng.ren@...eadtrum.com" <geng.ren@...eadtrum.com>,
"zhizhou.zhang" <zhizhou.zhang@...eadtrum.com>,
"lanqing.liu@...eadtrum.com" <lanqing.liu@...eadtrum.com>,
Wei Qiao (乔伟) <wei.qiao@...eadtrum.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>,
"linux-api@...r.kernel.org" <linux-api@...r.kernel.org>
Subject: Re: [PATCH v6 2/2] tty/serial: Add Spreadtrum sc9836-uart driver support
Hi, Peter
Many thanks to you for reviewing so carefully and giving us so many
suggestions and so clear explanations.
I'll address all of your comments and send an updated patch soon.
On Fri, Jan 23, 2015 at 11:57 AM, Peter Hurley <peter@...leysoftware.com> wrote:
> Hi Chunyan,
>
> On 01/22/2015 08:35 AM, Chunyan Zhang wrote:
>> Add a full sc9836-uart driver for SC9836 SoC which is based on the
>> spreadtrum sharkl64 platform.
>> This driver also support earlycon.
>
> Looking good. Comments below.
>
>> This patch also replaced the spaces between the macros and their
>> values with the tabs in serial_core.h
>
> Notes about patch changes goes...
>
>>
>> Originally-by: Lanqing Liu <lanqing.liu@...eadtrum.com>
>> Signed-off-by: Orson Zhai <orson.zhai@...eadtrum.com>
>> Signed-off-by: Chunyan Zhang <chunyan.zhang@...eadtrum.com>
>> ---
>
> ...here. For example,
>
> * Replaced spaces with tab for PORT_SPRD define in serial_core.h
>
ok
>> drivers/tty/serial/Kconfig | 18 +
>> drivers/tty/serial/Makefile | 1 +
>> drivers/tty/serial/sprd_serial.c | 801 ++++++++++++++++++++++++++++++++++++++
>> include/uapi/linux/serial_core.h | 3 +
>> 4 files changed, 823 insertions(+)
>> create mode 100644 drivers/tty/serial/sprd_serial.c
>>
>> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
>> index c79b43c..13211f7 100644
>> --- a/drivers/tty/serial/Kconfig
>> +++ b/drivers/tty/serial/Kconfig
>> @@ -1577,6 +1577,24 @@ config SERIAL_MEN_Z135
>> This driver can also be build as a module. If so, the module will be called
>> men_z135_uart.ko
>>
>> +config SERIAL_SPRD
>> + tristate "Support for Spreadtrum serial"
>> + depends on ARCH_SPRD
>> + select SERIAL_CORE
>> + help
>> + This enables the driver for the Spreadtrum's serial.
>> +
>> +config SERIAL_SPRD_CONSOLE
>> + bool "Spreadtrum UART console support"
>> + depends on SERIAL_SPRD=y
>> + select SERIAL_CORE_CONSOLE
>> + select SERIAL_EARLYCON
>> + help
>> + Support for early debug console using Spreadtrum's serial. This enables
>> + the console before standard serial driver is probed. This is enabled
>> + with "earlycon" on the kernel command line. The console is
>> + enabled when early_param is processed.
>> +
>> endmenu
>>
>> config SERIAL_MCTRL_GPIO
>> diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
>> index 9a548ac..4801aca 100644
>> --- a/drivers/tty/serial/Makefile
>> +++ b/drivers/tty/serial/Makefile
>> @@ -93,6 +93,7 @@ obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
>> obj-$(CONFIG_SERIAL_RP2) += rp2.o
>> obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o
>> obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o
>> +obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
>>
>> # GPIOLIB helpers for modem control lines
>> obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
>> diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
>> new file mode 100644
>> index 0000000..fd98541
>> --- /dev/null
>> +++ b/drivers/tty/serial/sprd_serial.c
>> @@ -0,0 +1,801 @@
>> +/*
>> + * Copyright (C) 2012-2015 Spreadtrum Communications Inc.
>> + *
>> + * This software is licensed under the terms of the GNU General Public
>> + * License version 2, as published by the Free Software Foundation, and
>> + * may be copied, distributed, and modified under those terms.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/console.h>
>> +#include <linux/delay.h>
>> +#include <linux/io.h>
>> +#include <linux/ioport.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/serial_core.h>
>> +#include <linux/serial.h>
>> +#include <linux/slab.h>
>> +#include <linux/tty.h>
>> +#include <linux/tty_flip.h>
>> +
>> +/* device name */
>> +#define UART_NR_MAX 8
>> +#define SPRD_TTY_NAME "ttyS"
>> +#define SPRD_FIFO_SIZE 128
>> +#define SPRD_DEF_RATE 26000000
>> +#define SPRD_TIMEOUT 2048
>> +
>> +/* the offset of serial registers and BITs for them */
>> +/* data registers */
>> +#define SPRD_TXD 0x0000
>> +#define SPRD_RXD 0x0004
>> +
>> +/* line status register and its BITs */
>> +#define SPRD_LSR 0x0008
>> +#define SPRD_LSR_OE BIT(4)
>> +#define SPRD_LSR_FE BIT(3)
>> +#define SPRD_LSR_PE BIT(2)
>> +#define SPRD_LSR_BI BIT(7)
>> +#define SPRD_LSR_TX_OVER BIT(15)
>> +
>> +/* data number in TX and RX fifo */
>> +#define SPRD_STS1 0x000C
>> +
>> +/* interrupt enable register and its BITs */
>> +#define SPRD_IEN 0x0010
>> +#define SPRD_IEN_RX_FULL BIT(0)
>> +#define SPRD_IEN_TX_EMPTY BIT(1)
>> +#define SPRD_IEN_BREAK_DETECT BIT(7)
>> +#define SPRD_IEN_TIMEOUT BIT(13)
>> +
>> +/* interrupt clear register */
>> +#define SPRD_ICLR 0x0014
>> +
>> +/* line control register */
>> +#define SPRD_LCR 0x0018
>> +#define SPRD_LCR_STOP_1BIT 0x10
>> +#define SPRD_LCR_STOP_2BIT 0x30
>> +#define SPRD_LCR_DATA_LEN (BIT(2) | BIT(3))
>> +#define SPRD_LCR_DATA_LEN5 0x0
>> +#define SPRD_LCR_DATA_LEN6 0x4
>> +#define SPRD_LCR_DATA_LEN7 0x8
>> +#define SPRD_LCR_DATA_LEN8 0xc
>> +#define SPRD_LCR_PARITY (BIT(0) | BIT(1))
>> +#define SPRD_LCR_PARITY_EN 0x2
>> +#define SPRD_LCR_EVEN_PAR 0x0
>> +#define SPRD_LCR_ODD_PAR 0x1
>> +
>> +/* control register 1 */
>> +#define SPRD_CTL1 0x001C
>> +#define RX_HW_FLOW_CTL_THLD BIT(6)
>> +#define RX_HW_FLOW_CTL_EN BIT(7)
>> +#define TX_HW_FLOW_CTL_EN BIT(8)
>> +
>> +/* fifo threshold register */
>> +#define SPRD_CTL2 0x0020
>> +#define THLD_TX_EMPTY 0x40
>> +#define THLD_RX_FULL 0x40
>> +
>> +/* config baud rate register */
>> +#define SPRD_CLKD0 0x0024
>> +#define SPRD_CLKD1 0x0028
>> +
>> +/* interrupt mask status register */
>> +#define SPRD_IMSR 0x002C
>> +#define SPRD_IMSR_RX_FIFO_FULL BIT(0)
>> +#define SPRD_IMSR_TX_FIFO_EMPTY BIT(1)
>> +#define SPRD_IMSR_BREAK_DETECT BIT(7)
>> +#define SPRD_IMSR_TIMEOUT BIT(13)
>> +
>> +struct reg_backup {
>> + uint32_t ien;
>
> u32 ien;
>
> same for others
>
>> + uint32_t ctrl0;
>> + uint32_t ctrl1;
>> + uint32_t ctrl2;
>> + uint32_t clkd0;
>> + uint32_t clkd1;
>> + uint32_t dspwait;
>> +};
>> +
>> +struct sprd_uart_port {
>> + struct uart_port port;
>> + struct reg_backup reg_bak;
>> + char name[16];
>> +};
>> +
>> +static struct sprd_uart_port *sprd_port[UART_NR_MAX] = { NULL };
> ^^^^^^^^^^
> Don't need the initializer.
>
>> +
>> +static inline unsigned int serial_in(struct uart_port *port, int offset)
>> +{
>> + return readl_relaxed(port->membase + offset);
>> +}
>> +
>> +static inline void serial_out(struct uart_port *port, int offset, int value)
>> +{
>> + writel_relaxed(value, port->membase + offset);
>> +}
>> +
>> +static unsigned int sprd_tx_empty(struct uart_port *port)
>> +{
>> + if (serial_in(port, SPRD_STS1) & 0xff00)
>> + return 0;
>> + else
>> + return TIOCSER_TEMT;
>> +}
>> +
>> +static unsigned int sprd_get_mctrl(struct uart_port *port)
>> +{
>> + return TIOCM_DSR | TIOCM_CTS;
>> +}
>> +
>> +static void sprd_set_mctrl(struct uart_port *port, unsigned int mctrl)
>> +{
>> + /* nothing to do */
>> +}
>> +
>> +static void sprd_stop_tx(struct uart_port *port)
>> +{
>> + unsigned int ien, iclr;
>> +
>> + iclr = serial_in(port, SPRD_ICLR);
>> + ien = serial_in(port, SPRD_IEN);
>> +
>> + iclr |= SPRD_IEN_TX_EMPTY;
>> + ien &= ~SPRD_IEN_TX_EMPTY;
>> +
>> + serial_out(port, SPRD_ICLR, iclr);
>> + serial_out(port, SPRD_IEN, ien);
>> +}
>> +
>> +static void sprd_start_tx(struct uart_port *port)
>> +{
>> + unsigned int ien;
>> +
>> + ien = serial_in(port, SPRD_IEN);
>> + if (!(ien & SPRD_IEN_TX_EMPTY)) {
>> + ien |= SPRD_IEN_TX_EMPTY;
>> + serial_out(port, SPRD_IEN, ien);
>> + }
>> +}
>> +
>> +static void sprd_stop_rx(struct uart_port *port)
>> +{
>> + unsigned int ien, iclr;
>> +
>> + iclr = serial_in(port, SPRD_ICLR);
>> + ien = serial_in(port, SPRD_IEN);
>> +
>> + ien &= ~(SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT);
>> + iclr |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT;
>> +
>> + serial_out(port, SPRD_IEN, ien);
>> + serial_out(port, SPRD_ICLR, iclr);
>> +}
>> +
>> +/* The Sprd serial does not support this function. */
>> +static void sprd_break_ctl(struct uart_port *port, int break_state)
>> +{
>> + /* nothing to do */
>> +}
>> +
>> +static inline int handle_lsr_errors(struct uart_port *port,
>> + unsigned int *flag,
>> + unsigned int *lsr)
>
> Don't declare this inline. gcc will inline single call site
> functions.
>
>> +{
>> + int ret = 0;
>> +
>> + /* statistics */
>> + if (*lsr & SPRD_LSR_BI) {
>> + *lsr &= ~(SPRD_LSR_FE | SPRD_LSR_PE);
>> + port->icount.brk++;
>> + ret = uart_handle_break(port);
>> + if (ret)
>> + return ret;
>> + } else if (*lsr & SPRD_LSR_PE)
>> + port->icount.parity++;
>> + else if (*lsr & SPRD_LSR_FE)
>> + port->icount.frame++;
>> + if (*lsr & SPRD_LSR_OE)
>> + port->icount.overrun++;
>> +
>> + /* mask off conditions which should be ignored */
>> + *lsr &= port->read_status_mask;
>> + if (*lsr & SPRD_LSR_BI)
>> + *flag = TTY_BREAK;
>> + else if (*lsr & SPRD_LSR_PE)
>> + *flag = TTY_PARITY;
>> + else if (*lsr & SPRD_LSR_FE)
>> + *flag = TTY_FRAME;
>> +
>> + return ret;
>> +}
>> +
>> +static inline void sprd_rx(int irq, void *dev_id)
> ^^^^^^^^^^^^
> struct uart_port *port
>
> The 'irq' parameter is unused, remove it.
> Don't declare inline.
>
>> +{
>> + struct uart_port *port = dev_id;
> ^^^^^^^^^
> delete this line.
>
>> + struct tty_port *tty = &port->state->port;
>> + unsigned int ch, flag, lsr, max_count = SPRD_TIMEOUT;
> ^^^^^^^^^
> == 2048?
>
> That's a lot. Most (all?) other drivers use 256.
>
>> +
>> + while ((serial_in(port, SPRD_STS1) & 0x00ff) && max_count--) {
>> + lsr = serial_in(port, SPRD_LSR);
>> + ch = serial_in(port, SPRD_RXD);
>> + flag = TTY_NORMAL;
>> + port->icount.rx++;
>> +
>> + if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE
>> + | SPRD_LSR_FE | SPRD_LSR_OE))
>
> operators should trail on the previous line, like
>
> if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE |
> SPRD_LSR_FE | SPRD_LSR_OE))
>
>
>> + if (handle_lsr_errors(port, &lsr, &flag))
>> + continue;
>> + if (uart_handle_sysrq_char(port, ch))
>> + continue;
>> +
>> + uart_insert_char(port, lsr, SPRD_LSR_OE, ch, flag);
>> + }
>> +
>> + tty_flip_buffer_push(tty);
>> +}
>> +
>> +static inline void sprd_tx(int irq, void *dev_id)
> ^^^^^^^^^^^^^
> struct uart_port *port
>
> The 'irq' parameter is unused, remove it.
> Don't declare inline.
>
>> +{
>> + struct uart_port *port = dev_id;
> ^^^^^^^^^
> delete this line.
>
>> + struct circ_buf *xmit = &port->state->xmit;
>> + int count;
>> +
>> + if (port->x_char) {
>> + serial_out(port, SPRD_TXD, port->x_char);
>> + port->icount.tx++;
>> + port->x_char = 0;
>> + return;
>> + }
>> +
>> + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
>> + sprd_stop_tx(port);
>> + return;
>> + }
>> +
>> + count = THLD_TX_EMPTY;
>> + do {
>> + serial_out(port, SPRD_TXD, xmit->buf[xmit->tail]);
>> + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
>> + port->icount.tx++;
>> + if (uart_circ_empty(xmit))
>> + break;
>> + } while (--count > 0);
>> +
>> + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
>> + uart_write_wakeup(port);
>> +
>> + if (uart_circ_empty(xmit))
>> + sprd_stop_tx(port);
>> +}
>> +
>> +/* this handles the interrupt from one port */
>> +static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
>> +{
>> + struct uart_port *port = (struct uart_port *)dev_id;
> ^^^^^^^^^^^
> Don't need the type cast.
>
>> + unsigned int ims;
>> +
>> + spin_lock(&port->lock);
>> +
>> + ims = serial_in(port, SPRD_IMSR);
>> +
>> + if (!ims)
>> + return IRQ_NONE;
>> +
>> + serial_out(port, SPRD_ICLR, ~0);
>> +
>> + if (ims & (SPRD_IMSR_RX_FIFO_FULL |
>> + SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT))
>> + sprd_rx(irq, port);
>> +
>> + if (ims & SPRD_IMSR_TX_FIFO_EMPTY)
>> + sprd_tx(irq, port);
>> +
>> + spin_unlock(&port->lock);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int sprd_startup(struct uart_port *port)
>> +{
>> + int ret = 0;
>> + unsigned int ien, ctrl1;
>> + unsigned int timeout;
>> + struct sprd_uart_port *sp;
>
> unsigned long flags;
>
>> +
>> + serial_out(port, SPRD_CTL2, ((THLD_TX_EMPTY << 8) | THLD_RX_FULL));
>> +
>> + /* clear rx fifo */
>> + timeout = SPRD_TIMEOUT;
>> + while (timeout-- && serial_in(port, SPRD_STS1) & 0x00ff)
>> + serial_in(port, SPRD_RXD);
>> +
>> + /* clear tx fifo */
>> + timeout = SPRD_TIMEOUT;
>> + while (timeout-- && serial_in(port, SPRD_STS1) & 0xff00)
>> + cpu_relax();
>> +
>> + /* clear interrupt */
>> + serial_out(port, SPRD_IEN, 0x0);
> ^^^
> just 0
>
>> + serial_out(port, SPRD_ICLR, ~0);
>> +
>> + /* allocate irq */
>> + sp = container_of(port, struct sprd_uart_port, port);
>> + snprintf(sp->name, sizeof(sp->name), "sprd_serial%d", port->line);
>> + ret = devm_request_irq(port->dev, port->irq, sprd_handle_irq,
>> + IRQF_SHARED, sp->name, port);
>> + if (ret) {
>> + dev_err(port->dev, "fail to request serial irq %d, ret=%d\n",
>> + port->irq, ret);
>> + return ret;
>> + }
>> + ctrl1 = serial_in(port, SPRD_CTL1);
>> + ctrl1 |= 0x3e00 | THLD_RX_FULL;
> ^^^^^
> What is this magic number?
>
>> + serial_out(port, SPRD_CTL1, ctrl1);
>> +
>> + /* enable interrupt */
>> + spin_lock(&port->lock);
>
> spin_lock_irqsave(&port->lock, flags);
>
>> + ien = serial_in(port, SPRD_IEN);
>> + ien |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT;
>> + serial_out(port, SPRD_IEN, ien);
>> + spin_unlock(&port->lock);
>
> spin_unlock_irqrestore(&port->lock, flags);
>
>> +
>> + return 0;
>> +}
>> +
>> +static void sprd_shutdown(struct uart_port *port)
>> +{
>> + serial_out(port, SPRD_IEN, 0x0);
> ^^^
> just 0
>
>> + serial_out(port, SPRD_ICLR, ~0);
>> + devm_free_irq(port->dev, port->irq, port);
>> +}
>> +
>> +static void sprd_set_termios(struct uart_port *port,
>> + struct ktermios *termios,
>> + struct ktermios *old)
>> +{
>> + unsigned int baud, quot;
>> + unsigned int lcr, fc;
>> + unsigned long flags;
>> +
>> + /* ask the core to calculate the divisor for us */
>> + baud = uart_get_baud_rate(port, termios, old, 1200, 3000000);
> ^^^^ ^^^^^^
> mabye derive these from uartclk?
I'm afraid I can't understand very clearly, Could you explain more
details please?
>
>> +
>> + quot = (unsigned int)((port->uartclk + baud / 2) / baud);
>> +
>> + /* set data length */
>> + lcr = serial_in(port, SPRD_LCR);
>> + lcr &= ~SPRD_LCR_DATA_LEN;
>
> What bits are being preserved in SPRD_LCR that you need to read the
> current value? IOW, why can't SPRD_LCR be defined only by the termios
> c_cflag? Like,
>
> lcr = 0;
>
yes, I think you're right. I'll change it.
>> + switch (termios->c_cflag & CSIZE) {
>> + case CS5:
>> + lcr |= SPRD_LCR_DATA_LEN5;
>> + break;
>> + case CS6:
>> + lcr |= SPRD_LCR_DATA_LEN6;
>> + break;
>> + case CS7:
>> + lcr |= SPRD_LCR_DATA_LEN7;
>> + break;
>> + case CS8:
>> + default:
>> + lcr |= SPRD_LCR_DATA_LEN8;
>> + break;
>> + }
>> +
>> + /* calculate stop bits */
>> + lcr &= ~(SPRD_LCR_STOP_1BIT | SPRD_LCR_STOP_2BIT);
>> + if (termios->c_cflag & CSTOPB)
>> + lcr |= SPRD_LCR_STOP_2BIT;
>> + else
>> + lcr |= SPRD_LCR_STOP_1BIT;
>> +
>> + /* calculate parity */
>> + lcr &= ~SPRD_LCR_PARITY;
>> + termios->c_cflag &= ~CMSPAR; /* no support mark/space */
>> + if (termios->c_cflag & PARENB) {
>> + lcr |= SPRD_LCR_PARITY_EN;
>> + if (termios->c_cflag & PARODD)
>> + lcr |= SPRD_LCR_ODD_PAR;
>> + else
>> + lcr |= SPRD_LCR_EVEN_PAR;
>> + }
>> +
>> + spin_lock_irqsave(&port->lock, flags);
>> +
>> + /* update the per-port timeout */
>> + uart_update_timeout(port, termios->c_cflag, baud);
>> +
>> + port->read_status_mask = SPRD_LSR_OE;
>> + if (termios->c_iflag & INPCK)
>> + port->read_status_mask |= SPRD_LSR_FE | SPRD_LSR_PE;
>> + if (termios->c_iflag & (BRKINT | PARMRK))
>
> if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
>
> Because if IGNBRK is set and a BRK is received, sprd_rx() should operate
> like this:
> /* - RESULT - */
> lsr = serial_in(SPRD_LSR) /* lsr = SPRD_LSR_BI */
> ch = serial_in(SPRD_RXD) /* ch = 0 */
>
> lsr & SPRD_LSR_BI ? yes
> handle_lsr_errors(lsr, flag)
>
> lsr &= read_status_mask /* lsr = SPRD_LSR_BI */
> flag = TTY_BREAK
>
> uart_insert_char(lsr, ch, flag)
> lsr & ignore_status_mask == 0? no /* ch _not_ inserted */
>
>
>> + port->read_status_mask |= SPRD_LSR_BI;
>> +
>> + /* characters to ignore */
>> + port->ignore_status_mask = 0;
>> + if (termios->c_iflag & IGNPAR)
>> + port->ignore_status_mask |= SPRD_LSR_PE | SPRD_LSR_FE;
>> + if (termios->c_iflag & IGNBRK) {
>> + port->ignore_status_mask |= SPRD_LSR_BI;
>> + /*
>> + * If we're ignoring parity and break indicators,
>> + * ignore overruns too (for real raw support).
>> + */
>> + if (termios->c_iflag & IGNPAR)
>> + port->ignore_status_mask |= SPRD_LSR_OE;
>> + }
>> +
>> + /* flow control */
>> + fc = serial_in(port, SPRD_CTL1);
>> + fc &= ~(RX_HW_FLOW_CTL_THLD | RX_HW_FLOW_CTL_EN | TX_HW_FLOW_CTL_EN);
>> + if (termios->c_cflag & CRTSCTS) {
>> + fc |= RX_HW_FLOW_CTL_THLD;
>> + fc |= RX_HW_FLOW_CTL_EN;
>> + fc |= TX_HW_FLOW_CTL_EN;
>> + }
>> +
>> + /* clock divider bit0~bit15 */
>> + serial_out(port, SPRD_CLKD0, quot & 0xffff);
>> +
>> + /* clock divider bit16~bit20 */
>> + serial_out(port, SPRD_CLKD1, (quot & 0x1f0000) >> 16);
>> + serial_out(port, SPRD_LCR, lcr);
>> + fc |= 0x3e00 | THLD_RX_FULL;
>> + serial_out(port, SPRD_CTL1, fc);
>> +
>> + spin_unlock_irqrestore(&port->lock, flags);
>> +
>> + /* Don't rewrite B0 */
>> + if (tty_termios_baud_rate(termios))
>> + tty_termios_encode_baud_rate(termios, baud, baud);
>> +}
>> +
>> +static const char *sprd_type(struct uart_port *port)
>> +{
>> + return "SPX";
>> +}
>> +
>> +static void sprd_release_port(struct uart_port *port)
>> +{
>> + /* nothing to do */
>> +}
>> +
>> +static int sprd_request_port(struct uart_port *port)
>> +{
>> + return 0;
>> +}
>> +
>> +static void sprd_config_port(struct uart_port *port, int flags)
>> +{
>> + if (flags & UART_CONFIG_TYPE)
>> + port->type = PORT_SPRD;
>> +}
>> +
>> +static int sprd_verify_port(struct uart_port *port,
>> + struct serial_struct *ser)
>> +{
>> + if (ser->type != PORT_SPRD)
>> + return -EINVAL;
>> + if (port->irq != ser->irq)
>> + return -EINVAL;
>> + return 0;
>> +}
>> +
>> +static struct uart_ops serial_sprd_ops = {
>> + .tx_empty = sprd_tx_empty,
>> + .get_mctrl = sprd_get_mctrl,
>> + .set_mctrl = sprd_set_mctrl,
>> + .stop_tx = sprd_stop_tx,
>> + .start_tx = sprd_start_tx,
>> + .stop_rx = sprd_stop_rx,
>> + .break_ctl = sprd_break_ctl,
>> + .startup = sprd_startup,
>> + .shutdown = sprd_shutdown,
>> + .set_termios = sprd_set_termios,
>> + .type = sprd_type,
>> + .release_port = sprd_release_port,
>> + .request_port = sprd_request_port,
>> + .config_port = sprd_config_port,
>> + .verify_port = sprd_verify_port,
>> +};
>> +
>> +#ifdef CONFIG_SERIAL_SPRD_CONSOLE
>> +static inline void wait_for_xmitr(struct uart_port *port)
>> +{
>> + unsigned int status, tmout = 10000;
>> +
>> + /* wait up to 10ms for the character(s) to be sent */
>> + do {
>> + status = serial_in(port, SPRD_STS1);
>> + if (--tmout == 0)
>> + break;
>> + udelay(1);
>> + } while (status & 0xff00);
>> +}
>> +
>> +static void sprd_console_putchar(struct uart_port *port, int ch)
>> +{
>> + wait_for_xmitr(port);
>> + serial_out(port, SPRD_TXD, ch);
>> +}
>> +
>> +static void sprd_console_write(struct console *co, const char *s,
>> + unsigned int count)
>> +{
>> + struct uart_port *port = &sprd_port[co->index]->port;
>> + int locked = 1;
>> + unsigned long flags;
>> +
>> + if (oops_in_progress)
>> + locked = spin_trylock(&port->lock);
>
> if (port->sysrq)
> locked = 0;
> else if (oops_in_progress)
> locked = spin_trylock_irqsave(&port->lock, flags);
>
>> + else
>> + spin_lock_irqsave(&port->lock, flags);
>> +
>> + uart_console_write(port, s, count, sprd_console_putchar);
>> +
>> + /* wait for transmitter to become empty */
>> + wait_for_xmitr(port);
>> +
>> + if (locked)
>> + spin_unlock_irqrestore(&port->lock, flags);
>> +}
>> +
>> +static int __init sprd_console_setup(struct console *co, char *options)
>> +{
>> + struct uart_port *port;
>> + int baud = 115200;
>> + int bits = 8;
>> + int parity = 'n';
>> + int flow = 'n';
>> +
>> + if (co->index >= UART_NR_MAX || co->index < 0)
>> + co->index = 0;
>> +
>> + port = &sprd_port[co->index]->port;
>> + if (port == NULL) {
>> + pr_info("serial port %d not yet initialized\n", co->index);
>> + return -ENODEV;
>> + }
>> + if (options)
>> + uart_parse_options(options, &baud, &parity, &bits, &flow);
>> +
>> + return uart_set_options(port, co, baud, parity, bits, flow);
>> +}
>> +
>> +static struct uart_driver sprd_uart_driver;
>> +static struct console sprd_console = {
>> + .name = SPRD_TTY_NAME,
>> + .write = sprd_console_write,
>> + .device = uart_console_device,
>> + .setup = sprd_console_setup,
>> + .flags = CON_PRINTBUFFER,
>> + .index = -1,
>> + .data = &sprd_uart_driver,
>> +};
>> +
>> +#define SPRD_CONSOLE (&sprd_console)
>> +
>> +/* Support for earlycon */
>> +static void sprd_putc(struct uart_port *port, int c)
>> +{
>> + unsigned int timeout = SPRD_TIMEOUT;
>> +
>> + while (timeout-- &&
>> + !(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER))
>> + cpu_relax();
>> +
>> + writeb(c, port->membase + SPRD_TXD);
>> +}
>> +
>> +static void sprd_early_write(struct console *con, const char *s,
>> + unsigned n)
>> +{
>> + struct earlycon_device *dev = con->data;
>> +
>> + uart_console_write(&dev->port, s, n, sprd_putc);
>> +}
>> +
>> +static int __init sprd_early_console_setup(
>> + struct earlycon_device *device,
>> + const char *opt)
>> +{
>> + if (!device->port.membase)
>> + return -ENODEV;
>> +
>> + device->con->write = sprd_early_write;
>> + return 0;
>> +}
>> +
>> +EARLYCON_DECLARE(sprd_serial, sprd_early_console_setup);
>> +OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart",
>> + sprd_early_console_setup);
>> +
>> +#else /* !CONFIG_SERIAL_SPRD_CONSOLE */
>> +#define SPRD_CONSOLE NULL
>> +#endif
>> +
>> +static struct uart_driver sprd_uart_driver = {
>> + .owner = THIS_MODULE,
>> + .driver_name = "sprd_serial",
>> + .dev_name = SPRD_TTY_NAME,
>> + .major = 0,
>> + .minor = 0,
>> + .nr = UART_NR_MAX,
>> + .cons = SPRD_CONSOLE,
>> +};
>> +
>> +static int sprd_probe_dt_alias(int index, struct device *dev)
>> +{
>> + struct device_node *np;
>> + static bool seen_dev_with_alias;
>> + static bool seen_dev_without_alias;
>> + int ret = index;
>> +
>> + if (!IS_ENABLED(CONFIG_OF))
>> + return ret;
>> +
>> + np = dev->of_node;
>> + if (!np)
>> + return ret;
>> +
>> + ret = of_alias_get_id(np, "serial");
>> + if (IS_ERR_VALUE(ret)) {
>> + seen_dev_without_alias = true;
>> + ret = index;
>> + } else {
>> + seen_dev_with_alias = true;
>> + if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {
>> + dev_warn(dev, "requested serial port %d not available.\n", ret);
>> + ret = index;
>> + }
>> + }
>> +
>> + if (seen_dev_with_alias && seen_dev_without_alias)
>> + dev_warn(dev, "aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.\n");
>
> Is this necessary? Why does a user want to know this?
I just followed pl011, but I think I can remove if nobody care it.
>
>> +
>> + return ret;
>> +}
>> +
>> +static int sprd_remove(struct platform_device *dev)
>> +{
>> + struct sprd_uart_port *sup = platform_get_drvdata(dev);
>> + bool busy = false;
>> + int i;
>> +
>> + if (sup)
>> + uart_remove_one_port(&sprd_uart_driver, &sup->port);
>
> see comment in sprd_probe()
ok, I see.
>
> if (sup) {
> uart_remove_one_port();
> sprd_port[sup->line] = NULL;
> sprd_ports--;
> }
>
> if (!sprd_ports)
> uart_unregister_driver();
>
>> +
>> + for (i = 0; i < ARRAY_SIZE(sprd_port); i++)
>> + if (sprd_port[i] == sup)
>> + sprd_port[i] = NULL;
>> + else if (sprd_port[i])
>> + busy = true;
>> +
>> + if (!busy)
>> + uart_unregister_driver(&sprd_uart_driver);
>> +
>> + return 0;
>> +}
>> +
>> +static int sprd_probe(struct platform_device *pdev)
>> +{
>> + struct resource *res;
>> + struct uart_port *up;
>> + struct clk *clk;
>> + int irq;
>> + int index;
>> + int ret;
>> +
>> + for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
>> + if (sprd_port[index] == NULL)
>> + break;
>> +
>> + if (index == ARRAY_SIZE(sprd_port))
>> + return -EBUSY;
>> +
>> + index = sprd_probe_dt_alias(index, &pdev->dev);
>> +
>> + sprd_port[index] = devm_kzalloc(&pdev->dev,
>> + sizeof(*sprd_port[index]), GFP_KERNEL);
>> + if (!sprd_port[index])
>> + return -ENOMEM;
>> +
>> + up = &sprd_port[index]->port;
>> + up->dev = &pdev->dev;
>> + up->line = index;
>> + up->type = PORT_SPRD;
>> + up->iotype = SERIAL_IO_PORT;
>> + up->uartclk = SPRD_DEF_RATE;
>> + up->fifosize = SPRD_FIFO_SIZE;
>> + up->ops = &serial_sprd_ops;
>> + up->flags = ASYNC_BOOT_AUTOCONF;
> ^^^^^^^^^
> UPF_BOOT_AUTOCONF
>
> sparse will catch errors like this. See Documentation/sparse.txt
you mean we should use UPF_BOOT_AUTOCONF, right?
>
>> +
>> + clk = devm_clk_get(&pdev->dev, NULL);
>> + if (!IS_ERR(clk))
>> + up->uartclk = clk_get_rate(clk);
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + if (!res) {
>> + dev_err(&pdev->dev, "not provide mem resource\n");
>> + return -ENODEV;
>> + }
>> + up->mapbase = res->start;
>> + up->membase = devm_ioremap_resource(&pdev->dev, res);
>> + if (IS_ERR(up->membase))
>> + return PTR_ERR(up->membase);
>> +
>> + irq = platform_get_irq(pdev, 0);
>> + if (irq < 0) {
>> + dev_err(&pdev->dev, "not provide irq resource\n");
>> + return -ENODEV;
>> + }
>> + up->irq = irq;
>> +
>> + if (!sprd_uart_driver.state) {
> ^^^^^^^^^^^^^^^^^^^^^^
> I know Rob said this was ok, but it's not.
>
> Just use a global counter.
ok.
>
> if (!sprd_ports) {
>
>> + ret = uart_register_driver(&sprd_uart_driver);
>> + if (ret < 0) {
>> + pr_err("Failed to register SPRD-UART driver\n");
>> + return ret;
>> + }
>> + }
>> +
>
> sprd_ports++;
>
>> + ret = uart_add_one_port(&sprd_uart_driver, up);
>> + if (ret) {
>> + sprd_port[index] = NULL;
>> + sprd_remove(pdev);
>> + }
>> +
>> + platform_set_drvdata(pdev, up);
>> +
>> + return ret;
>> +}
>> +
>> +static int sprd_suspend(struct device *dev)
>> +{
>> + int id = to_platform_device(dev)->id;
>> + struct uart_port *port = &sprd_port[id]->port;
>
> I'm a little confused regarding the port indexing;
> is platform_device->id == line ? Where did that happen?
>
Oh, I'll change to assign platform_device->id with port->line in probe()
>
>> +
>> + uart_suspend_port(&sprd_uart_driver, port);
>> +
>> + return 0;
>> +}
>> +
>> +static int sprd_resume(struct device *dev)
>> +{
>> + int id = to_platform_device(dev)->id;
>> + struct uart_port *port = &sprd_port[id]->port;
>> +
>> + uart_resume_port(&sprd_uart_driver, port);
>> +
>> + return 0;
>> +}
>> +
>> +static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume);
>> +
>> +static const struct of_device_id serial_ids[] = {
>> + {.compatible = "sprd,sc9836-uart",},
>> + {}
>> +};
>> +
>> +static struct platform_driver sprd_platform_driver = {
>> + .probe = sprd_probe,
>> + .remove = sprd_remove,
>> + .driver = {
>> + .name = "sprd_serial",
>> + .of_match_table = of_match_ptr(serial_ids),
>> + .pm = &sprd_pm_ops,
>> + },
>> +};
>> +
>> +module_platform_driver(sprd_platform_driver);
>> +
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DESCRIPTION("Spreadtrum SoC serial driver series");
>> diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
>> index c172180..7e6eb39 100644
>> --- a/include/uapi/linux/serial_core.h
>> +++ b/include/uapi/linux/serial_core.h
>> @@ -248,4 +248,7 @@
>> /* MESON */
>> #define PORT_MESON 109
>>
>> +/* SPRD SERIAL */
>> +#define PORT_SPRD 110
>> +
>> #endif /* _UAPILINUX_SERIAL_CORE_H */
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists