| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <54C1F7AE.6080805@samsung.com>
Date: Fri, 23 Jan 2015 16:26:38 +0900
From: Jaewon Kim <jaewon02.kim@...sung.com>
To: Krzysztof Kozłowski <k.kozlowski.k@...il.com>
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-pm@...r.kernel.org, Inki Dae <inki.dae@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Lee Jones <lee.jones@...aro.org>,
Chanwoo Choi <cw00.choi@...sung.com>,
Sebastian Reichel <sre@...nel.org>,
Mark Brown <broonie@...nel.org>,
Beomho Seo <beomho.seo@...sung.com>
Subject: Re: [PATCH 5/6] regulator: max77843: Add max77843 regulator driver
Hi Krzysztof,
2015년 01월 23일 16:18에 Krzysztof Kozłowski 이(가) 쓴 글:
> 2015-01-23 6:02 GMT+01:00 Jaewon Kim <jaewon02.kim@...sung.com>:
>> This patch adds new regulator driver to support max77843
>> MFD(Multi Function Device) chip`s regulators.
>> The Max77843 has two voltage regulators for USB safeout.
>>
>> Cc: Mark Brown <broonie@...nel.org>
>> Signed-off-by: Beomho Seo <beomho.seo@...sung.com>
>> Signed-off-by: Jaewon Kim <jaewon02.kim@...sung.com>
>> ---
>> drivers/regulator/Kconfig | 8 ++
>> drivers/regulator/Makefile | 1 +
>> drivers/regulator/max77843.c | 259 ++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 268 insertions(+)
>> create mode 100644 drivers/regulator/max77843.c
>>
>> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
>> index c3a60b5..c1f9c33 100644
>> --- a/drivers/regulator/Kconfig
>> +++ b/drivers/regulator/Kconfig
>> @@ -414,6 +414,14 @@ config REGULATOR_MAX77802
>> Exynos5420/Exynos5800 SoCs to control various voltages.
>> It includes support for control of voltage and ramp speed.
>>
>> +config REGULATOR_MAX77843
>> + tristate "Maxim 77843 regulator"
>> + depends on MFD_MAX77843
>> + help
>> + This driver controls a Maxim 77843 regulator.
>> + The regulator include two 'SAFEOUT' for USB(Universal Serial Bus)
>> + This is suitable for Exynos5433 SoC chips.
>> +
>> config REGULATOR_MC13XXX_CORE
>> tristate
>>
>> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
>> index 1f28ebf..12408d6 100644
>> --- a/drivers/regulator/Makefile
>> +++ b/drivers/regulator/Makefile
>> @@ -55,6 +55,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
>> obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
>> obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
>> obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
>> +obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o
>> obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
>> obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
>> obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
>> diff --git a/drivers/regulator/max77843.c b/drivers/regulator/max77843.c
>> new file mode 100644
>> index 0000000..86afc7a
>> --- /dev/null
>> +++ b/drivers/regulator/max77843.c
>> @@ -0,0 +1,259 @@
>> +/*
>> + * max77843.c - Regulator driver for the Maxim MAX77843
>> + *
>> + * Copyright (C) 2014 Samsung Electrnoics
>> + * Author: Jaewon Kim <jaewon02.kim@...sung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regulator/driver.h>
>> +#include <linux/regulator/machine.h>
>> +#include <linux/mfd/max77843-private.h>
>> +#include <linux/regulator/of_regulator.h>
>> +
>> +#define MAX77843_SUPPORTED_VOLTAGE_NUM 4
>> +
>> +enum max77843_regulator_type {
>> + MAX77843_SAFEOUT1 = 0,
>> + MAX77843_SAFEOUT2,
>> + MAX77843_CHARGER,
>> +
>> + MAX77843_NUM,
>> +};
>> +
>> +static const unsigned int max77843_regulator_table[] = {
>> + 4850000,
>> + 4900000,
>> + 4950000,
>> + 3300000,
>> +};
>> +
>> +static int max77843_reg_is_enabled(struct regulator_dev *rdev)
>> +{
>> + struct regmap *regmap = rdev->regmap;
>> + int ret;
>> + unsigned int reg;
>> +
>> + ret = regmap_read(regmap, rdev->desc->enable_reg, ®);
>> + if (ret) {
>> + dev_err(&rdev->dev, "Fialed to read charger register\n");
>> + return ret;
>> + }
>> +
>> + return (reg & rdev->desc->enable_mask) == rdev->desc->enable_mask;
>> +}
>> +
>> +static int max77843_reg_get_current_limit(struct regulator_dev *rdev)
>> +{
>> + struct regmap *regmap = rdev->regmap;
>> + unsigned int chg_min_uA = rdev->constraints->min_uA;
>> + unsigned int chg_max_uA = rdev->constraints->max_uA;
>> + unsigned int val;
>> + int ret;
>> + unsigned int reg, sel;
>> +
>> + ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_02, ®);
>> + if (ret) {
>> + dev_err(&rdev->dev, "Failed to read charger register\n");
>> + return ret;
>> + }
>> +
>> + sel = reg & MAX77843_CHG_FAST_CHG_CURRENT_MASK;
>> +
>> + if (sel < 0x03)
>> + sel = 0;
>> + else
>> + sel -= 2;
>> +
>> + val = chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel;
>> + if (val > chg_max_uA)
>> + return -EINVAL;
>> +
>> + return val;
>> +}
>> +
>> +static int max77843_reg_set_current_limit(struct regulator_dev *rdev,
>> + int min_uA, int max_uA)
>> +{
>> + struct regmap *regmap = rdev->regmap;
>> + unsigned int chg_min_uA = rdev->constraints->min_uA;
>> + int sel = 0;
>> +
>> + while (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel < min_uA)
>> + sel++;
>> +
>> + if (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel > max_uA)
>> + return -EINVAL;
>> +
>> + sel += 2;
>> +
>> + return regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_02, sel);
>> +}
>> +
>> +static struct regulator_ops max77843_charger_ops = {
>> + .is_enabled = max77843_reg_is_enabled,
>> + .enable = regulator_enable_regmap,
>> + .disable = regulator_disable_regmap,
>> + .get_current_limit = max77843_reg_get_current_limit,
>> + .set_current_limit = max77843_reg_set_current_limit,
>> +};
>> +
>> +static struct regulator_ops max77843_regulator_ops = {
>> + .is_enabled = regulator_is_enabled_regmap,
>> + .enable = regulator_enable_regmap,
>> + .disable = regulator_disable_regmap,
>> + .list_voltage = regulator_list_voltage_table,
>> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
>> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
>> +};
>> +
>> +static const struct regulator_desc max77843_supported_regulators[] = {
>> + [MAX77843_SAFEOUT1] = {
>> + .name = "SAFEOUT1",
>> + .id = MAX77843_SAFEOUT1,
>> + .ops = &max77843_regulator_ops,
>> + .type = REGULATOR_VOLTAGE,
>> + .owner = THIS_MODULE,
>> + .n_voltages = MAX77843_SUPPORTED_VOLTAGE_NUM,
>> + .volt_table = max77843_regulator_table,
>> + .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
>> + .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1,
>> + .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
>> + .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK,
>> + },
>> + [MAX77843_SAFEOUT2] = {
>> + .name = "SAFEOUT2",
>> + .id = MAX77843_SAFEOUT2,
>> + .ops = &max77843_regulator_ops,
>> + .type = REGULATOR_VOLTAGE,
>> + .owner = THIS_MODULE,
>> + .n_voltages = MAX77843_SUPPORTED_VOLTAGE_NUM,
>> + .volt_table = max77843_regulator_table,
>> + .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
>> + .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2,
>> + .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
>> + .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK,
>> + },
>> + [MAX77843_CHARGER] = {
>> + .name = "CHARGER",
>> + .id = MAX77843_CHARGER,
>> + .ops = &max77843_charger_ops,
>> + .type = REGULATOR_CURRENT,
>> + .owner = THIS_MODULE,
>> + .enable_reg = MAX77843_CHG_REG_CHG_CNFG_00,
>> + .enable_mask = MAX77843_CHG_MASK,
>> + },
>> +};
>> +
>> +static struct of_regulator_match max77843_regulator_matches[] = {
>> + { .name = "SAFEOUT1", },
>> + { .name = "SAFEOUT2", },
>> + { .name = "CHARGER", },
>> +};
>> +
>> +static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id)
>> +{
>> + switch (reg_id) {
>> + case MAX77843_SAFEOUT1:
>> + case MAX77843_SAFEOUT2:
>> + return max77843->regmap;
>> + case MAX77843_CHARGER:
>> + return max77843->regmap_chg;
>> + default:
>> + return max77843->regmap;
>> + }
>> +}
>> +
>> +static int max77843_regulator_dt_parse(struct platform_device *pdev)
>> +{
>> + struct device_node *np;
>> + int ret;
>> +
>> + np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
>> + if (!np) {
>> + dev_err(&pdev->dev,
>> + "Cannot get child OF node for regulators\n");
>> + return -EINVAL;
>> + }
>> +
>> + ret = of_regulator_match(&pdev->dev, np, max77843_regulator_matches,
>> + ARRAY_SIZE(max77843_regulator_matches));
>> + if (ret < 0) {
>> + dev_err(&pdev->dev, "Cannot parsing regulator init data\n");
>> + return ret;
>> + }
>> +
>> + of_node_put(np);
>> +
>> + return 0;
> Use simplified DT parsing method (of_match and regulators_node from
> regulators_desc). This function could be removed then.
Thanks to advice.
I will use more simplified method in next version.
>
> Best regards,
> Krzysztof
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Thanks,
Jaewon Kim
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists