| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150123103636.GA23493@leverpostej>
Date: Fri, 23 Jan 2015 10:36:36 +0000
From: Mark Rutland <mark.rutland@....com>
To: Chunyan Zhang <chunyan.zhang@...eadtrum.com>
Cc: "arnd@...db.de" <arnd@...db.de>,
Catalin Marinas <Catalin.Marinas@....com>,
Will Deacon <Will.Deacon@....com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
Pawel Moll <Pawel.Moll@....com>,
"ijc+devicetree@...lion.org.uk" <ijc+devicetree@...lion.org.uk>,
"galak@...eaurora.org" <galak@...eaurora.org>,
"Joel.Schopp@....com" <Joel.Schopp@....com>,
"Thomas.Lendacky@....com" <Thomas.Lendacky@....com>,
"suravee.suthikulpanit@....com" <suravee.suthikulpanit@....com>,
"broonie@...nel.org" <broonie@...nel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"geng.ren@...eadtrum.com" <geng.ren@...eadtrum.com>,
"zhizhou.zhang@...eadtrum.com" <zhizhou.zhang@...eadtrum.com>,
"zhang.lyra@...il.com" <zhang.lyra@...il.com>,
"wei.qiao@...eadtrum.com" <wei.qiao@...eadtrum.com>,
"orsonzhai@...il.com" <orsonzhai@...il.com>
Subject: Re: [PATCH v6 1/2] arm64: dts: Add support for Spreadtrum SC9836 SoC
in dts and Makefile
On Fri, Jan 23, 2015 at 10:21:30AM +0000, Chunyan Zhang wrote:
> From: Zhizhou Zhang <zhizhou.zhang@...eadtrum.com>
>
> Adds the device tree support for Spreadtrum SC9836 SoC which is based on
> Sharkl64 platform.
>
> Sharkl64 platform contains the common nodes of Spreadtrum's arm64-based SoCs.
>
> Signed-off-by: Zhizhou Zhang <zhizhou.zhang@...eadtrum.com>
> Signed-off-by: Orson Zhai <orson.zhai@...eadtrum.com>
> Signed-off-by: Chunyan Zhang <chunyan.zhang@...eadtrum.com>
> ---
> arch/arm64/boot/dts/Makefile | 1 +
> arch/arm64/boot/dts/sprd/Makefile | 5 ++
> arch/arm64/boot/dts/sprd/sc9836-openphone.dts | 49 ++++++++++++++++
> arch/arm64/boot/dts/sprd/sc9836.dtsi | 74 +++++++++++++++++++++++++
> arch/arm64/boot/dts/sprd/sharkl64.dtsi | 65 ++++++++++++++++++++++
> 5 files changed, 194 insertions(+)
> create mode 100644 arch/arm64/boot/dts/sprd/Makefile
> create mode 100644 arch/arm64/boot/dts/sprd/sc9836-openphone.dts
> create mode 100644 arch/arm64/boot/dts/sprd/sc9836.dtsi
> create mode 100644 arch/arm64/boot/dts/sprd/sharkl64.dtsi
>
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index 3b8d427..806a717 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -2,6 +2,7 @@ dts-dirs += amd
> dts-dirs += apm
> dts-dirs += arm
> dts-dirs += cavium
> +dts-dirs += sprd
>
> always := $(dtb-y)
> subdir-y := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
> new file mode 100644
> index 0000000..b658c5e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd/Makefile
> @@ -0,0 +1,5 @@
> +dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb
> +
> +always := $(dtb-y)
> +subdir-y := $(dts-dirs)
> +clean-files := *.dtb
> diff --git a/arch/arm64/boot/dts/sprd/sc9836-openphone.dts b/arch/arm64/boot/dts/sprd/sc9836-openphone.dts
> new file mode 100644
> index 0000000..b8a69b2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd/sc9836-openphone.dts
> @@ -0,0 +1,49 @@
> +/*
> + * Spreadtrum SC9836 openphone board DTS file
> + *
> + * Copyright (C) 2014, Spreadtrum Communications Inc.
> + *
> + * This file is licensed under a dual GPLv2 or X11 license.
> + */
> +
> +/dts-v1/;
> +
> +#include "sc9836.dtsi"
> +
> +/ {
> + model = "Spreadtrum SC9836 Openphone Board";
> +
> + compatible = "sprd,sc9836-openphone", "sprd,sc9836";
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + serial2 = &uart2;
> + serial3 = &uart3;
> + };
> +
> + memory@...00000 {
> + device_type = "memory";
> + reg = <0 0x80000000 0 0x20000000>;
> + };
> +
> + chosen {
> + stdout-path = &uart0;
> + };
It would be good to use an explicit configuration here. e.g. have:
chosen {
stdout-path = "serial0:115200n8";
};
Where '115200n8' is replaced by whatever the bootloader leaves the UART
configured as on this board.
That means you won't need a 'console=' to get nice consistent serial
output at boot, and won't be relying on implicit defaults all over the
place.
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi
> new file mode 100644
> index 0000000..c646123
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi
> @@ -0,0 +1,74 @@
> +/*
> + * Spreadtrum SC9836 SoC DTS file
> + *
> + * Copyright (C) 2014, Spreadtrum Communications Inc.
> + *
> + * This file is licensed under a dual GPLv2 or X11 license.
> + */
> +
> +#include "sharkl64.dtsi"
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "sprd,sc9836";
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + };
> +
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x1>;
> + enable-method = "psci";
> + };
> +
> + cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x2>;
> + enable-method = "psci";
> + };
> +
> + cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x3>;
> + enable-method = "psci";
> + };
> + };
> +
> + gic: interrupt-controller@...01000 {
> + compatible = "arm,gic-400";
> + reg = <0 0x12001000 0 0x1000>,
> + <0 0x12002000 0 0x2000>,
> + <0 0x12004000 0 0x2000>,
> + <0 0x12006000 0 0x2000>;
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + psci {
> + compatible = "arm,psci";
> + method = "smc";
> + cpu_on = <0xc4000003>;
> + cpu_off = <0x84000002>;
> + cpu_suspend = <0xc4000001>;
> + };
Given that there are no suspend states in this dts, the cpu_suspend
property here could be omitted for now (though I guess it doesn't matter
either way).
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/sprd/sharkl64.dtsi b/arch/arm64/boot/dts/sprd/sharkl64.dtsi
> new file mode 100644
> index 0000000..6b4bdc5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd/sharkl64.dtsi
> @@ -0,0 +1,65 @@
> +/*
> + * Spreadtrum Sharkl64 platform DTS file
> + *
> + * Copyright (C) 2014, Spreadtrum Communications Inc.
> + *
> + * This file is licensed under a dual GPLv2 or X11 license.
> + */
> +
> +/ {
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + ap-apb {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + uart0: serial@...00000 {
> + compatible = "sprd,sc9836-uart";
> + reg = <0 0x70000000 0 0x100>;
> + interrupts = <0 2 0xf04>;
> + clocks = <&clk26mhz>;
> + status = "disabled";
> + };
> +
> + uart1: serial@...00000 {
> + compatible = "sprd,sc9836-uart";
> + reg = <0 0x70100000 0 0x100>;
> + interrupts = <0 3 0xf04>;
> + clocks = <&clk26mhz>;
> + status = "disabled";
> + };
> +
> + uart2: serial@...00000 {
> + compatible = "sprd,sc9836-uart";
> + reg = <0 0x70200000 0 0x100>;
> + interrupts = <0 2 0xf04>;
> + clocks = <&clk26mhz>;
> + status = "disabled";
> + };
> +
> + uart3: serial@...00000 {
> + compatible = "sprd,sc9836-uart";
> + reg = <0 0x70300000 0 0x100>;
> + interrupts = <0 3 0xf04>;
> + clocks = <&clk26mhz>;
> + status = "disabled";
> + };
> + };
> + };
> +
> + clk26mhz: clk26mhz {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + };
> +};
Other than my comments above, this looks fine to me. I assume the UART
binding and driver are already queued somewhere else?
If so:
Acked-by: Mark Rutland <mark.rutland@....com>
Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists