| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1422265461-23381-1-git-send-email-wenyou.yang@atmel.com>
Date: Mon, 26 Jan 2015 17:44:21 +0800
From: Wenyou Yang <wenyou.yang@...el.com>
To: <nicolas.ferre@...el.com>, <linux@....linux.org.uk>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<alexandre.belloni@...e-electrons.com>,
<sylvain.rochet@...secur.com>, <peda@...ntia.se>,
<wenyou.yang@...el.com>
Subject: [PATCH v2 10/12] pm: at91: remove the at91_xxx_standby() function definitions in the pm.h
Because the the suspend to standby mode uses the sram function,
these functions will not used, remove the redundant code.
Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
Acked-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
---
arch/arm/mach-at91/pm.h | 97 -----------------------------------------------
1 file changed, 97 deletions(-)
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 5bc9c33..158575e 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -12,7 +12,6 @@
#define __ARCH_ARM_MACH_AT91_PM
#include <asm/proc-fns.h>
-
#include <mach/at91_ramc.h>
#define AT91_PM_MEMCTRL_MASK 0x0f
@@ -22,100 +21,4 @@
#define AT91_PM_SLOW_CLOCK 0x01
-#ifdef CONFIG_PM
-extern void at91_pm_set_standby(void (*at91_standby)(void));
-#else
-static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
-#endif
-
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- *
- * Self-refresh mode is exited as soon as a memory access is made, but we don't
- * know for sure when that happens. However, we need to restore the low-power
- * mode if it was enabled before going idle. Restoring low-power mode while
- * still in self-refresh is "not recommended", but seems to work.
- */
-
-static inline void at91rm9200_standby(void)
-{
- u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
-
- asm volatile(
- "b 1f\n\t"
- ".align 5\n\t"
- "1: mcr p15, 0, %0, c7, c10, 4\n\t"
- " str %0, [%1, %2]\n\t"
- " str %3, [%1, %4]\n\t"
- " mcr p15, 0, %0, c7, c0, 4\n\t"
- " str %5, [%1, %2]"
- :
- : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
- "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
- "r" (lpr));
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91_ddr_standby(void)
-{
- /* Those two values allow us to delay self-refresh activation
- * to the maximum. */
- u32 lpr0, lpr1 = 0;
- u32 saved_lpr0, saved_lpr1 = 0;
-
- if (at91_ramc_base[1]) {
- saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
- lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
- lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
- }
-
- saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
- lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
- lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
-
- /* self-refresh mode now */
- at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
-
- cpu_do_idle();
-
- at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91sam9_sdram_standby(void)
-{
- u32 lpr0, lpr1 = 0;
- u32 saved_lpr0, saved_lpr1 = 0;
-
- if (at91_ramc_base[1]) {
- saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
- lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
- lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
- }
-
- saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
- lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
- lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
-
- /* self-refresh mode now */
- at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
-
- cpu_do_idle();
-
- at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
-}
-
#endif
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists