early console in setup code Probing EDD (edd=off to disable)... ok [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.19.0-rc2-next-20150103 (kbuild@lkp-ib03) (gcc version 4.9.1 (Debian 4.9.1-19) ) #50 SMP Sat Jan 3 23:29:14 CST 2015 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x1000000 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at [c00fdae0] [ 0.000000] mpc: fdaf0-fdbec [ 0.000000] initial memory mapped: [mem 0x00000000-0x05ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x13800000-0x139fffff] [ 0.000000] [mem 0x13800000-0x139fffff] page 4k [ 0.000000] BRK [0x05a25000, 0x05a25fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x10000000-0x137fffff] [ 0.000000] [mem 0x10000000-0x137fffff] page 4k [ 0.000000] BRK [0x05a26000, 0x05a26fff] PGTABLE [ 0.000000] BRK [0x05a27000, 0x05a27fff] PGTABLE [ 0.000000] BRK [0x05a28000, 0x05a28fff] PGTABLE [ 0.000000] BRK [0x05a29000, 0x05a29fff] PGTABLE [ 0.000000] BRK [0x05a2a000, 0x05a2afff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff] [ 0.000000] [mem 0x00100000-0x0fffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x13a00000-0x13ffdfff] [ 0.000000] [mem 0x13a00000-0x13ffdfff] page 4k [ 0.000000] RAMDISK: [mem 0x13bfa000-0x13feffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000FD950 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x13FFE450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x13FFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x13FFE490 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0x13FFFF40 000040 [ 0.000000] ACPI: SSDT 0x13FFF7A0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x13FFF680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x13FFF640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffc000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000013ffdfff] [ 0.000000] NODE_DATA(0) allocated [mem 0x13ff7000-0x13ff7fff] [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 319MB LOWMEM available. [ 0.000000] max_low_pfn = 13ffe, highstart_pfn = 13ffe [ 0.000000] Low memory ends at vaddr d3ffe000 [ 0.000000] High memory starts at vaddr d3ffe000 [ 0.000000] mapped low ram: 0 - 13ffe000 [ 0.000000] low ram: 0 - 13ffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:13ff6001, primary cpu clock [ 0.000000] Node: 0, start_pfn: 1, end_pfn: 9f [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 0 [ 0.000000] Node: 0, start_pfn: 100, end_pfn: 13ffe [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 0 4000 8000 c000 10000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00001000-0x13ffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81820 [ 0.000000] free_area_init_node: node 0, pgdat d3ff7000, node_mem_map d3716020 [ 0.000000] Normal zone: 640 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 81820 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffc000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffb000 (fec00000) [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @d3bdc000 s34944 r0 d22400 u57344 [ 0.000000] pcpu-alloc: s34944 r0 d22400 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 13bdf7c0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81180 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/vm-kbuild-yocto-i386-3/rand_boot-1-yocto-minimal-i386.cgz-i386-randconfig-ib1-01032308-0062c94620a87cab4e7236a07e0f9432a2c59db3-1.yaml ARCH=i386 BOOT_IMAGE=/kernel/i386-randconfig-ib1-01032308/0062c94620a87cab4e7236a07e0f9432a2c59db3/vmlinuz-3.19.0-rc2-next-20150103 kconfig=i386-randconfig-ib1-01032308 commit=0062c94620a87cab4e7236a07e0f9432a2c59db3 branch=next/master root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-kbuild-yocto-i386/boot/1/yocto-minimal-i386.cgz/i386-randconfig-ib1-01032308/0062c94620a87cab4e7236a07e0f9432a2c59db3/0 ip=::::vm-kbuild-yocto-i386-3::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 286664K/327280K available (15340K kernel code, 1392K rwdata, 6228K rodata, 728K init, 8968K bss, 40616K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffa96000 - 0xfffff000 (5540 kB) [ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB) [ 0.000000] vmalloc : 0xd47fe000 - 0xff7fe000 ( 688 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd3ffe000 ( 319 MB) [ 0.000000] .init : 0xc5070000 - 0xc5126000 ( 728 kB) [ 0.000000] .data : 0xc48fb49e - 0xc506e2c0 (7627 kB) [ 0.000000] .text : 0xc3a00000 - 0xc48fb49e (15341 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] Running RCU self tests [ 0.000000] NR_IRQS:2304 nr_irqs:56 16 [ 0.000000] CPU 0 irqstacks, hard=c0094000 soft=c0096000 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.000000] ... CHAINHASH_SIZE: 32768 [ 0.000000] memory used by lock dependency info: 4911 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] ODEBUG: selftest passed [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2693.662 MHz processor [ 0.002000] Calibrating delay loop (skipped) preset value.. 5387.32 BogoMIPS (lpj=2693662) [ 0.002260] pid_max: default: 32768 minimum: 301 [ 0.003009] ACPI: Core revision 20141107 [ 0.005849] ACPI: All ACPI Tables successfully acquired [ 0.006387] Security Framework initialized [ 0.006736] SELinux: Initializing. [ 0.007045] SELinux: Starting in enforcing mode [ 0.007462] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.008007] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.009336] Initializing cgroup subsys freezer [ 0.009741] Initializing cgroup subsys net_cls [ 0.010010] Initializing cgroup subsys blkio [ 0.010379] Initializing cgroup subsys perf_event [ 0.010774] Initializing cgroup subsys net_prio [ 0.011080] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.011080] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.013557] debug: unmapping init [mem 0xc5126000-0xc5131fff] [ 0.019245] Getting VERSION: 50014 [ 0.019549] Getting VERSION: 50014 [ 0.019837] Getting ID: 0 [ 0.020012] Getting ID: f000000 [ 0.020291] Getting LVT0: 8700 [ 0.020553] Getting LVT1: 8400 [ 0.020810] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.021068] enabled ExtINT on CPU#0 [ 0.022497] ENABLING IO-APIC IRQs [ 0.022788] init IO_APIC IRQs [ 0.023004] apic 0 pin 0 not connected [ 0.023363] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.024026] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.024700] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.025018] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.026017] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.026678] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.027017] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.028017] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.028677] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.029018] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.030022] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.030705] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.031025] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.032020] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.033018] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.033722] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.034017] apic 0 pin 16 not connected [ 0.034343] apic 0 pin 17 not connected [ 0.035002] apic 0 pin 18 not connected [ 0.035333] apic 0 pin 19 not connected [ 0.035656] apic 0 pin 20 not connected [ 0.036003] apic 0 pin 21 not connected [ 0.036336] apic 0 pin 22 not connected [ 0.036660] apic 0 pin 23 not connected [ 0.037150] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.037731] smpboot: CPU0: Intel QEMU Virtual CPU version 1.7.1 (fam: 06, model: 06, stepping: 03) [ 0.038683] Using local APIC timer interrupts. [ 0.038683] calibrating APIC timer ... [ 0.040000] ... lapic delta = 6250076 [ 0.040000] ... PM-Timer delta = 357960 [ 0.040000] ... PM-Timer result ok [ 0.040000] ..... delta 6250076 [ 0.040000] ..... mult: 268438720 [ 0.040000] ..... calibration result: 1000012 [ 0.040000] ..... CPU clock speed is 2693.0550 MHz. [ 0.040000] ..... host bus clock speed is 1000.0012 MHz. [ 0.040083] Performance Events: Broken PMU hardware detected, using software events only. [ 0.041627] Failed to access perfctr msr (MSR c1 is 0) [ 0.043365] CPU 1 irqstacks, hard=c0104000 soft=c0106000 [ 0.043991] x86: Booting SMP configuration: [ 0.044480] .... node #0, CPUs: #1 [ 0.001000] Initializing CPU#1 [ 0.002000] kvm-clock: cpu 1, msr 0:13ff6041, secondary cpu clock [ 0.002000] masked ExtINT on CPU#1 [ 0.058051] KVM setup async PF for cpu 1 [ 0.058105] x86: Booted up 1 node, 2 CPUs [ 0.058110] ---------------- [ 0.058111] | NMI testsuite: [ 0.058111] -------------------- [ 0.059000] remote IPI: [ 0.059000] kvm-stealtime: cpu 1, msr 13bed7c0 [ 0.063029] ok | [ 0.063235] local IPI: ok | [ 0.075012] -------------------- [ 0.075297] Good, all 2 testcases passed! | [ 0.075699] --------------------------------- [ 0.076003] smpboot: Total of 2 processors activated (10774.64 BogoMIPS) [ 0.077261] devtmpfs: initialized [ 0.081093] atomic64_test: passed for i586+ platform with CX8 and with SSE [ 0.082490] NET: Registered protocol family 16 [ 0.089025] cpuidle: using governor ladder [ 0.095015] cpuidle: using governor menu [ 0.096860] ACPI: bus type PCI registered [ 0.097091] dca service started, version 1.12.1 [ 0.097610] PCI: PCI BIOS revision 2.10 entry at 0xfc6d5, last bus=0 [ 0.098003] PCI: Using configuration type 1 for base access [ 0.130127] gpio-f7188x: Not a Fintek device at 0x0000002e [ 0.130634] gpio-f7188x: Not a Fintek device at 0x0000004e [ 0.131268] ACPI: Added _OSI(Module Device) [ 0.131638] ACPI: Added _OSI(Processor Device) [ 0.132003] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.132421] ACPI: Added _OSI(Processor Aggregator Device) [ 0.134101] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:3) [ 0.138657] ACPI: Interpreter enabled [ 0.138980] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580) [ 0.139466] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.140482] ACPI: (supports S0 S3 S5) [ 0.140792] ACPI: Using IOAPIC for interrupt routing [ 0.141037] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.149350] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.149886] acpi PNP0A03:00: _OSC: OS supports [Segments] [ 0.150038] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.151258] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.152145] PCI host bridge to bus 0000:00 [ 0.152514] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.153004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.153524] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.154003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.154577] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.155057] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.156417] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.157489] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.160006] pci 0000:00:01.1: reg 0x20: [io 0xc080-0xc08f] [ 0.161422] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.162003] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.162554] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.163003] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.163808] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.164298] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.165012] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.166314] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.168046] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.170013] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.176048] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.177378] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.178396] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 0.179771] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.184005] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.185190] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.186399] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [ 0.187402] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [ 0.192360] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000 [ 0.193424] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f] [ 0.196641] pci_bus 0000:00: on NUMA node 0 [ 0.198014] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.198697] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.199310] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.200087] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.200706] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.201714] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.203162] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.203591] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.204007] vgaarb: loaded [ 0.204247] vgaarb: bridge control possible 0000:00:02.0 [ 0.206228] SCSI subsystem initialized [ 0.206693] libata version 3.00 loaded. [ 0.207208] media: Linux media interface: v0.10 [ 0.207668] Linux video capture interface: v2.00 [ 0.208076] pps_core: LinuxPPS API ver. 1 registered [ 0.208536] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.209020] PTP clock support registered [ 0.209480] wmi: Mapper loaded [ 0.210116] PCI: Using ACPI for IRQ routing [ 0.210514] PCI: pci_cache_line_size set to 32 bytes [ 0.211112] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.211631] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff] [ 0.212681] NET: Registered protocol family 23 [ 0.213062] Bluetooth: Core ver 2.20 [ 0.213390] NET: Registered protocol family 31 [ 0.214003] Bluetooth: HCI device and connection manager initialized [ 0.214548] Bluetooth: HCI socket layer initialized [ 0.215006] Bluetooth: L2CAP socket layer initialized [ 0.215454] Bluetooth: SCO socket layer initialized [ 0.216096] cfg80211: Calling CRDA to update world regulatory domain [ 0.216724] NetLabel: Initializing [ 0.217003] NetLabel: domain hash size = 128 [ 0.217371] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.217840] NetLabel: unlabeled traffic allowed by default [ 0.218059] nfc: nfc_init: NFC Core ver 0.1 [ 0.218462] NET: Registered protocol family 39 [ 0.220764] Switched to clocksource kvm-clock [ 0.221000] pnp: PnP ACPI init [ 0.221181] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 0.221933] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.222546] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 0.223283] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.223886] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 0.224627] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.225250] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 0.225929] pnp 00:03: [dma 2] [ 0.226254] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.226865] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 0.227595] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.228228] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 0.228953] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.229587] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:3) [ 0.230316] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.231248] pnp: PnP ACPI: found 7 devices [ 0.267700] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.268208] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.268658] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.269212] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.270021] NET: Registered protocol family 2 [ 0.270914] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.271583] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) [ 0.272445] TCP: Hash tables configured (established 4096 bind 4096) [ 0.273064] TCP: reno registered [ 0.273347] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.273903] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.274811] NET: Registered protocol family 1 [ 0.275224] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.275714] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.276235] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.276749] pci 0000:00:02.0: Video device with shadowed ROM [ 0.277272] PCI: CLS 0 bytes, default 32 [ 0.277885] Unpacking initramfs... [ 0.511527] debug: unmapping init [mem 0xd3bfa000-0xd3feffff] [ 0.514857] cryptomgr_test (27) used greatest stack depth: 7204 bytes left [ 0.515911] PCLMULQDQ-NI instructions are not detected. [ 0.516575] The force parameter has not been set to 1. The Iris poweroff handler will not be installed. [ 0.517679] NatSemi SCx200 Driver [ 0.518221] rcu-torture:--- Start of test: nreaders=1 nfakewriters=4 stat_interval=60 verbose=1 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 stall_cpu=0 stall_cpu_holdoff=10 n_barrier_cbs=0 onoff_interval=0 onoff_holdoff=0 [ 0.520790] rcu-torture: Creating rcu_torture_writer task [ 0.521487] rcu-torture: Creating rcu_torture_fakewriter task [ 0.521990] rcu-torture: rcu_torture_writer task started [ 0.522508] rcu-torture: Creating rcu_torture_fakewriter task [ 0.522520] rcu-torture: rcu_torture_fakewriter task started [ 0.523580] rcu-torture: Creating rcu_torture_fakewriter task [ 0.524126] rcu-torture: rcu_torture_fakewriter task started [ 0.524630] rcu-torture: Creating rcu_torture_fakewriter task [ 0.524673] rcu-torture: rcu_torture_fakewriter task started [ 0.525832] rcu-torture: Creating rcu_torture_reader task [ 0.525885] rcu-torture: rcu_torture_fakewriter task started [ 0.526903] rcu-torture: Creating rcu_torture_stats task [ 0.526915] rcu-torture: rcu_torture_reader task started [ 0.527840] rcu-torture: Creating torture_shuffle task [ 0.528337] rcu-torture: rcu_torture_stats task started [ 0.528813] rcu-torture: Creating torture_stutter task [ 0.528820] rcu-torture: torture_shuffle task started [ 0.529781] rcu-torture: Creating rcu_torture_cbflood task [ 0.530324] rcu-torture: torture_stutter task started [ 0.530863] rcu-torture: rcu_torture_cbflood task started [ 0.531201] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.531263] audit: initializing netlink subsys (disabled) [ 0.531347] audit: type=2000 audit(1420298999.020:1): initialized [ 0.531667] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.531771] zpool: loaded [ 0.531951] VFS: Disk quotas dquot_6.5.2 [ 0.532346] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.536698] ntfs: driver 2.1.31 [Flags: R/O]. [ 0.537140] efs: 1.0a - http://aeschi.ch.eu.org/efs/ [ 0.537637] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.538107] QNX4 filesystem 0.2.3 registered. [ 0.538493] fuse init (API version 7.23) [ 0.539149] JFS: nTxBlock = 2239, nTxLock = 17916 [ 0.543658] SGI XFS with ACLs, security attributes, realtime, debug enabled [ 0.544649] NILFS version 2 loaded [ 0.544957] befs: version: 0.9.3 [ 0.545641] OCFS2 User DLM kernel interface loaded [ 0.546569] SELinux: Registering netfilter hooks [ 0.559524] NET: Registered protocol family 38 [ 0.559959] Key type asymmetric registered [ 0.560337] Asymmetric key parser 'x509' registered [ 0.560784] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.562160] io scheduler noop registered (default) [ 0.563062] test_firmware: interface ready [ 0.563827] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 0.564284] crc32: self tests passed, processed 225944 bytes in 185504 nsec [ 0.565062] crc32c: CRC_LE_BITS = 64 [ 0.565365] crc32c: self tests passed, processed 225944 bytes in 91656 nsec [ 0.579589] crc32_combine: 8373 self tests passed [ 0.593355] crc32c_combine: 8373 self tests passed [ 0.593907] xz_dec_test: module loaded [ 0.594245] xz_dec_test: Create a device node with 'mknod xz_dec_test c 247 0' and write .xz files to it. [ 0.595092] glob: 64 self-tests passed, 0 failed [ 0.595762] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.596243] cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8 [ 0.596840] ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6 [ 0.597455] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 0.598112] cpcihp_generic: not configured, disabling. [ 0.598561] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.599773] no IO addresses supplied [ 0.600211] hgafb: HGA card not detected. [ 0.600562] hgafb: probe of hgafb.0 failed with error -22 [ 0.601200] ipmi message handler version 39.2 [ 0.601575] ipmi device interface [ 0.601927] IPMI System Interface driver. [ 0.602336] ipmi_si: Adding default-specified kcs state machine [ 0.602847] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 0.603689] ipmi_si: Interface detection failed [ 0.616055] ipmi_si: Adding default-specified smic state machine [ 0.616581] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 0.617445] ipmi_si: Interface detection failed [ 0.625038] ipmi_si: Adding default-specified bt state machine [ 0.625556] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 0.626401] ipmi_si: Interface detection failed [ 0.636164] ipmi_si: Unable to find any System Interface(s) [ 0.636654] IPMI Watchdog: driver initialized [ 0.637045] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 0.637928] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.638587] ACPI: Power Button [PWRF] [ 0.639714] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 0.641183] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.641678] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:3) [ 0.674227] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 0.674693] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.699655] serial 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.701741] Initializing Nozomi driver 2.1d [ 0.702460] lp: driver loaded but no devices found [ 0.702881] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 0.703511] ac.o: No PCI boards found. [ 0.703832] ac.o: For an ISA board you must supply memory and irq parameters. [ 0.704450] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 0.705337] Non-volatile memory driver v1.3 [ 0.705699] toshiba: not a supported Toshiba laptop [ 0.706324] ppdev: user-space parallel port driver [ 0.706731] scx200_gpio: no SCx200 gpio present [ 0.707668] nsc_gpio initializing [ 0.707991] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 0.708940] smapi::smapi_init, ERROR invalid usSmapiID [ 0.709403] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 0.710202] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 0.710797] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 0.711353] Linux agpgart interface v0.103 [ 0.711986] SyncLink PC Card driver $Revision: 4.34 $, tty major#238 [ 0.712567] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 0.713434] [drm] Initialized drm 1.1.0 20060810 [ 0.713906] drm/i810 does not support SMP [ 0.715180] [TTM] Zone kernel: Available graphics memory: 143332 kiB [ 0.715731] [TTM] Initializing pool allocator [ 0.716994] [drm] fb mappable at 0xFC000000 [ 0.717373] [drm] vram aper at 0xFC000000 [ 0.717711] [drm] size 33554432 [ 0.718018] [drm] fb depth is 24 [ 0.718292] [drm] pitch is 3072 [ 0.718890] cirrus 0000:00:02.0: fb0: cirrusdrmfb frame buffer device [ 0.719466] cirrus 0000:00:02.0: registered panic notifier [ 0.764040] [drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0 [ 0.765456] parport_pc 00:04: reported by Plug and Play ACPI [ 0.766087] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 0.848391] lp0: using parport0 (interrupt-driven). [ 0.849555] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 0.850130] dummy-irq: no IRQ given. Use irq=N [ 0.850539] lkdtm: No crash points registered, enable through debugfs [ 0.851131] Phantom Linux Driver, version n0.9.8, init OK [ 0.851750] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 0.852485] c2port c2port0: C2 port uc added [ 0.852850] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 0.854456] Loading iSCSI transport class v2.0-870. [ 0.855118] hp_sw: device handler registered [ 0.855485] emc: device handler registered [ 0.855839] alua: device handler registered [ 0.856207] osst :I: Tape driver with OnStream support version 0.99.4 [ 0.856207] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 0.858053] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 0.859919] SSFDC read-only Flash Translation layer [ 0.860356] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.860924] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [ 0.861579] device id = 2440 [ 0.861832] device id = 2480 [ 0.862089] device id = 24c0 [ 0.862336] device id = 24d0 [ 0.862582] device id = 25a1 [ 0.862832] device id = 2670 [ 0.863151] scx200_docflash: NatSemi SCx200 DOCCS Flash Driver [ 0.863765] slram: not enough parameters. [ 0.864201] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. [ 0.864949] pmc551: not detected [ 0.894463] No valid DiskOnChip devices found [ 0.894914] HSI/SSI char device loaded [ 0.895265] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 0.899156] libphy: Fixed MDIO Bus: probed [ 0.899754] tun: Universal TUN/TAP device driver, 1.6 [ 0.900209] tun: (C) 1999-2004 Max Krasnyansky [ 0.901703] arcnet loaded. [ 0.901955] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 0.902543] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 0.903174] arcnet: cap mode (`c') encapsulation support loaded. [ 0.903684] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 0.904300] E-mail me if you actually test this driver, please! [ 0.904797] arc%d: No autoprobe for IO mapped cards; you must specify the base address! [ 0.905653] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 0.906392] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) [ 0.906984] v1.01-e (2.4 port) Sep-11-2006 Donald Becker [ 0.906984] http://www.scyld.com/network/drivers.html [ 0.908149] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 0.908694] sky2: driver version 1.30 [ 0.910192] Solarflare NET driver v4.0 [ 0.910754] tehuti: Tehuti Networks(R) Network Driver, 7.29.3 [ 0.911248] tehuti: Options: hw_csum [ 0.912401] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 0.913222] SLIP linefill/keepalive option. [ 0.913610] airo(): Probing for PCI adapters [ 0.913999] airo(): Finished probing for PCI adapters [ 0.914559] Loaded prism54 driver, version 1.2 [ 0.915039] Broadcom 43xx driver loaded [ Features: PML ] [ 0.915518] Broadcom 43xx-legacy driver loaded [ Features: PLI ] [ 0.916285] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 0.916783] Copyright(c) 2003- 2014 Intel Corporation [ 0.917275] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 0.917855] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 0.918381] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 0.919154] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 0.919686] mac80211_hwsim: initializing netlink [ 0.920911] ieee80211 phy0: Failed to select rate control algorithm [ 0.921460] ieee80211 phy0: Failed to initialize rate control algorithm [ 0.972280] mac80211_hwsim: ieee80211_register_hw failed (-2) [ 0.972982] VMware vmxnet3 virtual NIC driver - version 1.2.1.0-k-NAPI [ 0.973577] I2O subsystem v1.325 [ 0.973858] i2o: max drivers = 8 [ 0.975473] I2O Configuration OSM v1.323 [ 0.975916] I2O Bus Adapter OSM v1.317 [ 0.976273] I2O SCSI Peripheral OSM v1.316 [ 0.976635] I2O ProcFS OSM v1.316 [ 0.976951] Fusion MPT base driver 3.04.20 [ 0.977309] Copyright (c) 1999-2008 LSI Corporation [ 0.977732] Fusion MPT SPI Host driver 3.04.20 [ 0.978155] Fusion MPT misc device (ioctl) driver 3.04.20 [ 0.978799] mptctl: Registered with Fusion MPT base driver [ 0.979276] mptctl: /dev/mptctl @ (major,minor=10,220) [ 0.979709] parport0: cannot grant exclusive access for device ks0108 [ 0.980279] ks0108: ERROR: parport didn't register new device [ 0.980775] cfag12864b: ERROR: ks0108 is not initialized [ 0.981237] cfag12864bfb: ERROR: cfag12864b is not initialized [ 0.981953] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.983396] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.983858] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.031809] mousedev: PS/2 mouse device common for all mice [ 1.032489] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 1.033787] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.035280] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 1.036841] parport0: cannot grant exclusive access for device walkera0701 [ 1.037430] walkera0701: failed to register parport device [ 1.038551] rtc (null): invalid alarm value: 1900-1-3 0:0:0 [ 1.039166] rtc-test rtc-test.0: rtc core: registered test as rtc0 [ 1.039766] rtc (null): invalid alarm value: 1900-1-3 0:0:0 [ 1.040347] rtc-test rtc-test.1: rtc core: registered test as rtc1 [ 1.041236] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 1.066237] i2c-parport: adapter type unspecified [ 1.066645] i2c-parport-light: adapter type unspecified [ 1.068468] vivid-000: using single planar format API [ 1.073136] vivid-000: V4L2 capture device registered as video0 [ 1.073712] vivid-000: V4L2 output device registered as video1 [ 1.075143] vivid-000: V4L2 capture device registered as vbi0, supports raw and sliced VBI [ 1.075905] vivid-000: V4L2 output device registered as vbi1, supports raw and sliced VBI [ 1.076673] vivid-000: V4L2 capture device registered as swradio0 [ 1.077761] vivid-000: V4L2 receiver device registered as radio0 [ 1.078345] vivid-000: V4L2 transmitter device registered as radio1 [ 1.079086] vim2m vim2m.0: Device registered as /dev/video2 [ 1.079578] saa7146: register extension 'hexium HV-PCI6 Orion' [ 1.080108] ivtv: Start initialization, version 1.4.3 [ 1.080555] ivtv: End initialization [ 1.080869] Zoran MJPEG board driver version 0.10.1 [ 1.081319] Linux video codec intermediate layer: v0.2 [ 1.081825] cx2388x blackbird driver version 1.0.0 loaded [ 1.082296] cx88/2: registering cx8802 driver, type: blackbird access: shared [ 1.082907] bttv: driver version 0.9.19 loaded [ 1.083297] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 1.083861] bttv: Host bridge needs ETBF enabled [ 1.084326] saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 1.084991] pps pps0: new PPS source ktimer [ 1.085365] pps pps0: ktimer PPS source registered [ 1.085778] pps_ldisc: PPS line discipline registered [ 1.086212] pps_parport: parallel port PPS client [ 1.086610] parport0: cannot grant exclusive access for device pps_parport [ 1.087196] pps_parport: couldn't register with parport0 [ 1.087696] Driver for 1-wire Dallas network protocol. [ 1.089065] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 1.089658] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 1.090559] power_supply test_ac: uevent [ 1.090900] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 1.092121] power_supply test_ac: prop ONLINE=1 [ 1.092531] power_supply test_ac: power_supply_changed [ 1.093053] power_supply test_ac: power_supply_changed_work [ 1.093531] power_supply test_ac: power_supply_update_gen_leds 1 [ 1.094055] power_supply test_ac: uevent [ 1.094388] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 1.094860] power_supply test_ac: prop ONLINE=1 [ 1.095374] power_supply test_battery: uevent [ 1.095750] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 1.096325] power_supply test_battery: prop STATUS=Discharging [ 1.096820] power_supply test_battery: prop CHARGE_TYPE=Fast [ 1.097306] power_supply test_battery: prop HEALTH=Good [ 1.097752] power_supply test_battery: prop PRESENT=1 [ 1.098186] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 1.098667] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 1.099223] power_supply test_battery: prop CHARGE_FULL=100 [ 1.099709] power_supply test_battery: prop CHARGE_NOW=50 [ 1.100804] power_supply test_battery: prop CAPACITY=50 [ 1.102310] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 1.102821] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 1.103344] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 1.103855] power_supply test_battery: prop MODEL_NAME=Test battery [ 1.104386] power_supply test_battery: prop MANUFACTURER=Linux [ 1.104875] power_supply test_battery: prop SERIAL_NUMBER=3.19.0-rc2-next-20150103 [ 1.105512] power_supply test_battery: prop TEMP=26 [ 1.105923] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 1.106597] power_supply test_battery: power_supply_changed [ 1.107089] power_supply test_battery: power_supply_changed_work [ 1.107584] power_supply test_battery: power_supply_update_bat_leds 2 [ 1.108138] power_supply test_battery: uevent [ 1.108503] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 1.109064] power_supply test_battery: prop STATUS=Discharging [ 1.109546] power_supply test_battery: prop CHARGE_TYPE=Fast [ 1.110030] power_supply test_battery: prop HEALTH=Good [ 1.110461] power_supply test_battery: prop PRESENT=1 [ 1.110886] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 1.111372] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 1.112029] power_supply test_battery: prop CHARGE_FULL=100 [ 1.112751] power_supply test_battery: prop CHARGE_NOW=50 [ 1.113214] power_supply test_battery: prop CAPACITY=50 [ 1.113650] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 1.114266] power_supply test_usb: uevent [ 1.114607] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 1.115105] power_supply test_usb: prop ONLINE=1 [ 1.115500] power_supply test_usb: power_supply_changed [ 1.116262] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 1.116780] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 1.117308] power_supply test_battery: prop MODEL_NAME=Test battery [ 1.117836] power_supply test_battery: prop MANUFACTURER=Linux [ 1.119184] power_supply test_battery: prop SERIAL_NUMBER=3.19.0-rc2-next-20150103 [ 1.119826] power_supply test_battery: prop TEMP=26 [ 1.120461] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 1.120977] power_supply test_usb: power_supply_changed_work [ 1.121466] power_supply test_usb: power_supply_update_gen_leds 1 [ 1.122175] power_supply test_usb: uevent [ 1.122511] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 1.122996] power_supply test_usb: prop ONLINE=1 [ 1.155395] i2c i2c-0: w83795: Detection failed at addr 0x2c, check bank [ 1.160072] i2c i2c-0: w83795: Detection failed at addr 0x2d, check bank [ 1.164810] i2c i2c-0: w83795: Detection failed at addr 0x2e, check bank [ 1.169049] i2c i2c-0: w83795: Detection failed at addr 0x2f, check bank [ 1.230378] detect failed, chip not detected! [ 1.238048] detect failed, chip not detected! [ 1.246041] detect failed, chip not detected! [ 1.254309] detect failed, chip not detected! [ 1.262053] detect failed, chip not detected! [ 1.270043] detect failed, chip not detected! [ 1.278048] detect failed, chip not detected! [ 1.286056] detect failed, chip not detected! [ 1.294352] detect failed, chip not detected! [ 1.298044] i2c i2c-0: ADM1025 detection failed at 0x2c [ 1.302052] i2c i2c-0: ADM1025 detection failed at 0x2d [ 1.306048] i2c i2c-0: ADM1025 detection failed at 0x2e [ 1.312055] i2c i2c-0: Detecting device at 0,0x2c with COMPANY: 0xff and VERSTEP: 0xff [ 1.312729] i2c i2c-0: Autodetecting device at 0,0x2c... [ 1.313195] i2c i2c-0: Autodetection failed [ 1.319046] i2c i2c-0: Detecting device at 0,0x2d with COMPANY: 0xff and VERSTEP: 0xff [ 1.319699] i2c i2c-0: Autodetecting device at 0,0x2d... [ 1.320169] i2c i2c-0: Autodetection failed [ 1.326050] i2c i2c-0: Detecting device at 0,0x2e with COMPANY: 0xff and VERSTEP: 0xff [ 1.326704] i2c i2c-0: Autodetecting device at 0,0x2e... [ 1.327164] i2c i2c-0: Autodetection failed [ 1.349275] i2c i2c-0: detect fail: address match, 0x2c [ 1.353064] i2c i2c-0: detect fail: address match, 0x2d [ 1.357047] i2c i2c-0: detect fail: address match, 0x2e [ 1.361048] i2c i2c-0: detect fail: address match, 0x2f [ 1.365058] (null): Wrong manufacturer ID. Got 255, expected 65 [ 1.369053] (null): Wrong manufacturer ID. Got 255, expected 65 [ 1.373266] (null): Wrong manufacturer ID. Got 255, expected 65 [ 1.411053] applesmc: supported laptop not found! [ 1.411452] applesmc: driver init failed (ret=-19)! [ 1.491077] f71882fg: Not a Fintek device [ 1.491441] f71882fg: Not a Fintek device [ 1.511054] (null): Unknown chip type, skipping [ 1.515054] (null): Unknown chip type, skipping [ 1.525849] tsc: Refined TSC clocksource calibration: 2693.507 MHz [ 1.733061] i2c i2c-0: Unsupported chip (man_id=0xFF, chip_id=0xFF) [ 1.747057] i2c i2c-0: Unsupported chip (man_id=0xFF, chip_id=0xFF) [ 1.761957] i2c i2c-0: Unsupported chip (man_id=0xFF, chip_id=0xFF) [ 1.832066] i2c i2c-0: LM83 detection failed at 0x18 [ 1.836074] i2c i2c-0: LM83 detection failed at 0x19 [ 1.840059] i2c i2c-0: LM83 detection failed at 0x1a [ 1.844064] i2c i2c-0: LM83 detection failed at 0x29 [ 1.848067] i2c i2c-0: LM83 detection failed at 0x2a [ 1.852059] i2c i2c-0: LM83 detection failed at 0x2b [ 1.856056] i2c i2c-0: LM83 detection failed at 0x4c [ 1.860062] i2c i2c-0: LM83 detection failed at 0x4d [ 1.864995] i2c i2c-0: LM83 detection failed at 0x4e [ 1.871066] i2c i2c-0: Detecting device at 0x2c with COMPANY: 0xff and VERSTEP: 0xff [ 1.879058] i2c i2c-0: Detecting device at 0x2d with COMPANY: 0xff and VERSTEP: 0xff [ 1.885051] i2c i2c-0: Detecting device at 0x2e with COMPANY: 0xff and VERSTEP: 0xff [ 1.908055] i2c i2c-0: Unsupported chip at 0x18 (man_id=0xFF, chip_id=0xFF) [ 1.919056] i2c i2c-0: Unsupported chip at 0x19 (man_id=0xFF, chip_id=0xFF) [ 1.929062] i2c i2c-0: Unsupported chip at 0x1a (man_id=0xFF, chip_id=0xFF) [ 1.939058] i2c i2c-0: Unsupported chip at 0x29 (man_id=0xFF, chip_id=0xFF) [ 1.949065] i2c i2c-0: Unsupported chip at 0x2a (man_id=0xFF, chip_id=0xFF) [ 1.959891] i2c i2c-0: Unsupported chip at 0x2b (man_id=0xFF, chip_id=0xFF) [ 1.970059] i2c i2c-0: Unsupported chip at 0x48 (man_id=0xFF, chip_id=0xFF) [ 1.980060] i2c i2c-0: Unsupported chip at 0x49 (man_id=0xFF, chip_id=0xFF) [ 1.990058] i2c i2c-0: Unsupported chip at 0x4a (man_id=0xFF, chip_id=0xFF) [ 2.000054] i2c i2c-0: Unsupported chip at 0x4b (man_id=0xFF, chip_id=0xFF) [ 2.010055] i2c i2c-0: Unsupported chip at 0x4c (man_id=0xFF, chip_id=0xFF) [ 2.020053] i2c i2c-0: Unsupported chip at 0x4d (man_id=0xFF, chip_id=0xFF) [ 2.030061] i2c i2c-0: Unsupported chip at 0x4e (man_id=0xFF, chip_id=0xFF) [ 2.040060] i2c i2c-0: Unsupported chip at 0x4f (man_id=0xFF, chip_id=0xFF) [ 2.101059] i2c i2c-0: detect failed, bad manufacturer id 0xff! [ 2.105063] i2c i2c-0: detect failed, bad manufacturer id 0xff! [ 2.109074] i2c i2c-0: detect failed, bad manufacturer id 0xff! [ 2.265092] pc87360: PC8736x not detected, module not inserted [ 2.265690] sch56xx_common: Unsupported device id: 0xff [ 2.266224] sch56xx_common: Unsupported device id: 0xff [ 2.274176] i2c i2c-0: SMSC47M192 detection failed at 0x2c [ 2.280055] i2c i2c-0: SMSC47M192 detection failed at 0x2d [ 2.282640] thmc50: Probing for THMC50 at 0x2C on bus 0 [ 2.291051] thmc50: Probing for THMC50 at 0x2D on bus 0 [ 2.299049] thmc50: Probing for THMC50 at 0x2E on bus 0 [ 2.329059] i2c i2c-0: W83L786NG detection failed at 0x2e [ 2.333061] i2c i2c-0: W83L786NG detection failed at 0x2f [ 2.333685] acquirewdt: WDT driver for Acquire single board computer initialising [ 2.334539] acquirewdt: I/O address 0x0043 already in use [ 2.335101] acquirewdt: probe of acquirewdt failed with error -5 [ 2.335712] alim7101_wdt: Steve Hill [ 2.336251] alim7101_wdt: ALi M7101 PMU not present - WDT not set [ 2.337610] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising [ 2.338517] wafer5823wdt: initialized. timeout=60 sec (nowayout=0) [ 2.339136] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.339679] pc87413_wdt: Version 1.1 at io 0x2E [ 2.341174] pc87413_wdt: cannot register miscdev on minor=130 (err=-16) [ 2.341737] nv_tco: NV TCO WatchDog Timer Driver v0.01 [ 2.342356] sbc60xxwdt: I/O address 0x0443 already in use [ 2.342818] sbc8360: failed to register misc device [ 2.344922] cpu5wdt: misc_register failed [ 2.345436] Bluetooth: Virtual HCI driver ver 1.5 [ 2.345971] Bluetooth: HCI UART driver ver 2.2 [ 2.346373] Bluetooth: HCI BCSP protocol initialized [ 2.353377] ISDN subsystem Rev: 1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 [ 2.354138] PPP BSD Compression module registered [ 2.354542] Modular ISDN core version 1.1.29 [ 2.355113] NET: Registered protocol family 34 [ 2.355498] DSP module 2.0 [ 2.355755] mISDN_dsp: DSP clocks every 64 samples. This equals 8 jiffies. [ 2.358317] Infineon ISDN Driver Rev. 1.0 [ 2.358714] Winbond W6692 PCI driver Rev. 2.0 [ 2.359205] Netjet PCI driver Rev. 2.0 [ 2.359549] mISDNipac module version 2.0 [ 2.359980] dss1_divert module successfully installed [ 2.361395] lguest: mapped switcher at ffa90000 [ 2.361931] cpufreq-nforce2: No nForce2 chipset. [ 2.363355] leds_ss4200: no LED devices found [ 4.426056] (null): enodev DEV ADDR = 0xFF [ 4.426596] ledtrig-cpu: registered to indicate activity on CPUs [ 4.428057] iscsi: registered transport (iser) [ 4.428994] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 4.429782] hidraw: raw HID events driver (C) Jiri Kosina [ 4.430978] Colour QuickCam for Video4Linux v0.06 [ 5.941029] No Quickcam found on port parport0 [ 5.941397] Quickcam detection counter: 0 [ 6.116463] panel: driver version 0.9.5 registered on parport0 (io=0x378). [ 6.117050] vme_user: VME User Space Access Driver [ 6.117442] vme_user: No cards, skipping registration [ 6.118528] dgap: dgap-1.3-16, Digi International Part Number 40002347_C [ 6.119090] dgap: For the tools package please visit http://www.digi.com [ 6.119774] FPGA DOWNLOAD ---> [ 6.120048] FPGA image file name: xlinx_fpga_firmware.bit [ 6.120615] GPIO INIT FAIL!! [ 6.121895] oprofile: using NMI interrupt. [ 6.122290] pktgen: Packet Generator for packet performance testing. Version: 2.74 [ 6.123265] NET: Registered protocol family 26 [ 6.123945] netem: version 1.3 [ 6.124302] Netfilter messages via NETLINK v0.30. [ 6.124744] nf_conntrack version 0.5.0 (4479 buckets, 17916 max) [ 6.125359] ctnetlink v0.93: registering with nfnetlink. [ 6.125868] nf_tables: (c) 2007-2009 Patrick McHardy [ 6.126415] nf_tables_compat: (c) 2012 Pablo Neira Ayuso [ 6.127070] IPVS: Registered protocols (AH) [ 6.127422] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) [ 6.128018] IPVS: Each connection entry needs 240 bytes at least [ 6.128584] IPVS: Creating netns size=1104 id=0 [ 6.128983] IPVS: ipvs loaded. [ 6.129266] IPVS: [rr] scheduler registered. [ 6.129617] IPVS: [wrr] scheduler registered. [ 6.129969] IPVS: [lc] scheduler registered. [ 6.130328] IPVS: [wlc] scheduler registered. [ 6.130686] IPVS: [fo] scheduler registered. [ 6.131044] IPVS: [lblc] scheduler registered. [ 6.131405] IPVS: [lblcr] scheduler registered. [ 6.131775] IPVS: [dh] scheduler registered. [ 6.132132] IPVS: [sh] scheduler registered. [ 6.132534] ipip: IPv4 over IPv4 tunneling driver [ 6.133385] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.133870] TCP: cubic registered [ 6.134163] Initializing XFRM netlink socket [ 6.134638] NET: Registered protocol family 10 [ 6.135832] mip6: Mobile IPv6 [ 6.136144] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 6.137315] ip6_gre: GRE over IPv6 tunneling driver [ 6.138100] NET: Registered protocol family 17 [ 6.138501] NET: Registered protocol family 15 [ 6.138910] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this