linux-kernel - [PATCH 1/3] gpio: pxa: remove mach IRQ includes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1422333966-18338-2-git-send-email-robh@kernel.org>
Date:	Mon, 26 Jan 2015 22:46:04 -0600
From:	Rob Herring <robh@...nel.org>
To:	Linus Walleij <linus.walleij@...aro.org>,
	Alexandre Courbot <gnurou@...il.com>
Cc:	linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
	Rob Herring <robh@...nel.org>
Subject: [PATCH 1/3] gpio: pxa: remove mach IRQ includes

In preparation to enable ARCH_MMP on ARM64, the include of mach/irqs.h
must be eliminated. mach/irqs.h was being included for IRQ_GPIO{0,1},
but these IRQs are always passed in as resources now. We can use irq0
and irq1 and get rid of IRQ_GPIOx. Get rid of the ifdef in the process
as it is no longer needed.

Signed-off-by: Rob Herring <robh@...nel.org>
Cc: Linus Walleij <linus.walleij@...aro.org>
Cc: Alexandre Courbot <gnurou@...il.com>
---
 drivers/gpio/gpio-pxa.c | 38 ++++++++++++++++++--------------------
 1 file changed, 18 insertions(+), 20 deletions(-)

diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index ad3feec..b4fb8de 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -17,6 +17,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio-pxa.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/irqchip/chained_irq.h>
@@ -27,8 +28,6 @@
 #include <linux/syscore_ops.h>
 #include <linux/slab.h>
 
-#include <mach/irqs.h>
-
 /*
  * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
  * one set of registers. The register offsets are organized below:
@@ -629,19 +628,18 @@ static int pxa_gpio_probe(struct platform_device *pdev)
 	}
 
 	if (!use_of) {
-#ifdef CONFIG_ARCH_PXA
-		irq = gpio_to_irq(0);
-		irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		irq_set_chained_handler(IRQ_GPIO0, pxa_gpio_demux_handler);
-
-		irq = gpio_to_irq(1);
-		irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		irq_set_chained_handler(IRQ_GPIO1, pxa_gpio_demux_handler);
-#endif
+		if (irq0 > 0) {
+			irq = gpio_to_irq(0);
+			irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+						 handle_edge_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+		if (irq1 > 0) {
+			irq = gpio_to_irq(1);
+			irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+						 handle_edge_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
 
 		for (irq  = gpio_to_irq(gpio_offset);
 			irq <= gpio_to_irq(pxa_last_gpio); irq++) {
@@ -649,13 +647,13 @@ static int pxa_gpio_probe(struct platform_device *pdev)
 						 handle_edge_irq);
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}
-	} else {
-		if (irq0 > 0)
-			irq_set_chained_handler(irq0, pxa_gpio_demux_handler);
-		if (irq1 > 0)
-			irq_set_chained_handler(irq1, pxa_gpio_demux_handler);
 	}
 
+	if (irq0 > 0)
+		irq_set_chained_handler(irq0, pxa_gpio_demux_handler);
+	if (irq1 > 0)
+		irq_set_chained_handler(irq1, pxa_gpio_demux_handler);
+
 	irq_set_chained_handler(irq_mux, pxa_gpio_demux_handler);
 	return 0;
 }
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/