| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 27 Jan 2015 17:26:37 -0800
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Matthias Schwarzott <zzam@...too.org>,
Antti Palosaari <crope@....fi>,
Hans Verkuil <hans.verkuil@...co.com>,
Mauro Carvalho Chehab <mchehab@....samsung.com>
Subject: [PATCH 3.18 25/61] [media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthias Schwarzott <zzam@...too.org>
commit 721f3223f26bbe81c7e55f84188e74d99df50a16 upstream.
Unconditionally attaching Si2161/Si2165 demod driver
breaks Hauppauge WinTV Starburst.
So create own card entry for this.
Add card name comments to the subsystem ids.
This fixes a regression introduced in 3.17 by
36efec48e2e6016e05364906720a0ec350a5d768 ([media] cx23885: Add si2165 support for HVR-5500)
Signed-off-by: Matthias Schwarzott <zzam@...too.org>
Tested-by: Antti Palosaari <crope@....fi>
Signed-off-by: Hans Verkuil <hans.verkuil@...co.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@....samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/media/pci/cx23885/cx23885-cards.c | 23 +++++++++++++++++------
drivers/media/pci/cx23885/cx23885-dvb.c | 11 +++++++++++
drivers/media/pci/cx23885/cx23885.h | 1 +
3 files changed, 29 insertions(+), 6 deletions(-)
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -614,7 +614,7 @@ struct cx23885_board cx23885_boards[] =
.portb = CX23885_MPEG_DVB,
},
[CX23885_BOARD_HAUPPAUGE_HVR4400] = {
- .name = "Hauppauge WinTV-HVR4400",
+ .name = "Hauppauge WinTV-HVR4400/HVR5500",
.porta = CX23885_ANALOG_VIDEO,
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
@@ -622,6 +622,10 @@ struct cx23885_board cx23885_boards[] =
.tuner_addr = 0x60, /* 0xc0 >> 1 */
.tuner_bus = 1,
},
+ [CX23885_BOARD_HAUPPAUGE_STARBURST] = {
+ .name = "Hauppauge WinTV Starburst",
+ .portb = CX23885_MPEG_DVB,
+ },
[CX23885_BOARD_AVERMEDIA_HC81R] = {
.name = "AVerTV Hybrid Express Slim HC81R",
.tuner_type = TUNER_XC2028,
@@ -910,19 +914,19 @@ struct cx23885_subid cx23885_subids[] =
}, {
.subvendor = 0x0070,
.subdevice = 0xc108,
- .card = CX23885_BOARD_HAUPPAUGE_HVR4400,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-4400 (Model 121xxx, Hybrid DVB-T/S2, IR) */
}, {
.subvendor = 0x0070,
.subdevice = 0xc138,
- .card = CX23885_BOARD_HAUPPAUGE_HVR4400,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-5500 (Model 121xxx, Hybrid DVB-T/C/S2, IR) */
}, {
.subvendor = 0x0070,
.subdevice = 0xc12a,
- .card = CX23885_BOARD_HAUPPAUGE_HVR4400,
+ .card = CX23885_BOARD_HAUPPAUGE_STARBURST, /* Hauppauge WinTV Starburst (Model 121x00, DVB-S2, IR) */
}, {
.subvendor = 0x0070,
.subdevice = 0xc1f8,
- .card = CX23885_BOARD_HAUPPAUGE_HVR4400,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-5500 (Model 121xxx, Hybrid DVB-T/C/S2, IR) */
}, {
.subvendor = 0x1461,
.subdevice = 0xd939,
@@ -1495,8 +1499,9 @@ void cx23885_gpio_setup(struct cx23885_d
cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
break;
case CX23885_BOARD_HAUPPAUGE_HVR4400:
+ case CX23885_BOARD_HAUPPAUGE_STARBURST:
/* GPIO-8 tda10071 demod reset */
- /* GPIO-9 si2165 demod reset */
+ /* GPIO-9 si2165 demod reset (only HVR4400/HVR5500)*/
/* Put the parts into reset and back */
cx23885_gpio_enable(dev, GPIO_8 | GPIO_9, 1);
@@ -1760,6 +1765,7 @@ void cx23885_card_setup(struct cx23885_d
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_HAUPPAUGE_HVR4400:
+ case CX23885_BOARD_HAUPPAUGE_STARBURST:
case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xc0);
@@ -1864,6 +1870,11 @@ void cx23885_card_setup(struct cx23885_d
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
+ case CX23885_BOARD_HAUPPAUGE_STARBURST:
+ ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
case CX23885_BOARD_DVBSKY_T9580:
ts1->gen_ctrl_val = 0x5; /* Parallel */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -1586,6 +1586,17 @@ static int dvb_register(struct cx23885_t
break;
}
break;
+ case CX23885_BOARD_HAUPPAUGE_STARBURST:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(tda10071_attach,
+ &hauppauge_tda10071_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(a8293_attach, fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &hauppauge_a8293_config);
+ }
+ break;
case CX23885_BOARD_DVBSKY_T9580:
i2c_bus = &dev->i2c_bus[0];
i2c_bus2 = &dev->i2c_bus[1];
--- a/drivers/media/pci/cx23885/cx23885.h
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -93,6 +93,7 @@
#define CX23885_BOARD_HAUPPAUGE_IMPACTVCBE 43
#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2 44
#define CX23885_BOARD_DVBSKY_T9580 45
+#define CX23885_BOARD_HAUPPAUGE_STARBURST 52
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists