Message-ID: <54C92878.3030207@ti.com>
Date:	Wed, 28 Jan 2015 13:20:40 -0500
From:	Murali Karicheri <m-karicheri2@...com>
To:	Arnd Bergmann <arnd@...db.de>
CC:	David Miller <davem@...emloft.net>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>
Subject: Re: [PATCH net-next v8 0/4] net: Add Keystone NetCP ethernet driver
 support

On 01/28/2015 12:43 PM, Murali Karicheri wrote:
> On 01/28/2015 11:49 AM, Murali Karicheri wrote:
>> On 01/27/2015 05:28 PM, Arnd Bergmann wrote:
>>> On Tuesday 20 January 2015 10:53:36 Murali Karicheri wrote:
>>>> On 01/19/2015 03:11 PM, David Miller wrote:
>>>>> From: Murali Karicheri<m-karicheri2@...com>
>>>>> Date: Thu, 15 Jan 2015 19:10:03 -0500
>>>>>
>>>>>> The Network Coprocessor (NetCP) is a hardware accelerator that
>>>>>> processes
>>>>>> Ethernet packets. NetCP has a gigabit Ethernet (GbE) subsystem with
>>>>>> a ethernet
>>>>>> switch sub-module to send and receive packets. NetCP also includes
>>>>>> a packet
>>>>>> accelerator (PA) module to perform packet classification operations
>>>>>> such as
>>>>>> header matching, and packet modification operations such as checksum
>>>>>> generation. NetCP can also optionally include a Security
>>>>>> Accelerator(SA)
>>>>>> capable of performing IPSec operations on ingress/egress packets.
>>>>>>
>>>>>> Keystone SoC's also have a 10 Gigabit Ethernet Subsystem (XGbE) which
>>>>>> includes a 3-port Ethernet switch sub-module capable of 10Gb/s and
>>>>>> 1Gb/s rates per Ethernet port.
>>>>>>
>>>>>> Both GBE and XGBE network processors supported using common
>>>>>> driver. It
>>>>>> is also designed to handle future variants of NetCP.
>>>>>
>>>>> Series applied to net-next, thanks.
>>>> David,
>>>>
>>>> Thanks a lot for applying this series. This helps us move forward to
>>>> work on the next set of patches.
>>>
>>> Hi Murali,
>>>
>>> Building an ARM 'allmodconfig' kernel now runs into two separate
>>> problems
>>> from your driver:
>>>
>>> - you have two module_init() instances in one module, which conflict.
>>>
>>> - you have two files that are linked into more than one module, so
>>> building
>>> both TI_CPSW and TI_KEYSTONE_NETCP in the same kernel fails.
>>>
>>> The answer to both of these is probably to have separate loadable
>>> modules,
>>> but you might be able to come up with a different solution.
>> Arnd,
>>
>> Thanks for letting us know. We will look into this.
>>
>> How do I reproduce this? Is there a defconfig used for allmodconfig? I
>> am unable to find one. Any details to reproduce this will be useful.
>>
> Ok I think I found it.
>
> I did this with next-next branch and it seems to work. I will make
> kernel build to reproduce this.
>
> make ARCH=arm allmodconfig
> make uImage;
>
> I am building it now.
Arnd,

I see allmodconfig configure NetCP driver as module. My uImage build 
from net-next branch went through fine. I am building modules right now 
and should show error as you have pointed out. Let me know if you any 
issues on how I am working to reproduce the issue (wrong branch, wrong 
/incomplete commands etc. I have my CROSS_COMPILE and ARCH set in my 
env). Want to reproduce this so as to make sure my fix is addressing 
this. Hope I am on the right track.

Thanks

Murali
>
> Murali
>> Thanks.
>>
>> Murali
>>>
>>> Arnd
>>
>>
>
>


-- 
Murali Karicheri
Linux Kernel, Texas Instruments
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists