[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <201501281509.17333@pali>
Date: Wed, 28 Jan 2015 15:09:17 +0100
From: Pali Rohár <pali.rohar@...il.com>
To: Peter Ujfalusi <peter.ujfalusi@...com>
Cc: Pavel Machek <pavel@....cz>,
Jarkko Nikula <jarkko.nikula@...mer.com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.de>,
linux-omap@...r.kernel.org, alsa-devel@...a-project.org,
linux-kernel@...r.kernel.org, Sebastian Reichel <sre@...ian.org>,
Ivaylo Dimitrov <ivo.g.dimitrov.75@...il.com>,
Aaro Koskinen <aaro.koskinen@....fi>
Subject: Re: [PATCH] ASoC: rx51: do not fail if could not get jack detection gpio
> > > It is quite important to keep qemu working, really.
> > > Debugging early boot on hardware is very hard, for
> > > example.
> >
> > I understand, but looking at the history of the driver, if
> > it fails now with the jack-detection GPIO, it should have
> > been failing in the past as well. What triggered this
> > sudden qemu does not like jack-detection GPIO? Before the
> > devm_gpiod_get() conversion the driver should have failed in
> > snd_soc_jack_add_gpios() phase.
>
> With 3.12 kernel rx51-audio driver loads without any problem.
> So there is some regression. Here is dmesg log from 3.12
> kernel:
>
> [ 1.123779] rx51-audio rx51-audio: tlv320aic3x-hifi <->
> omap- mcbsp.2 mapping ok
> [ 1.130737] tlv320aic3x-codec 2-0019: ASoC: mux b Right
> Line1L Mux has no paths
> [ 1.131347] tlv320aic3x-codec 2-0019: ASoC: mux b Left
> Line1R Mux has no paths
> [ 1.133697] tlv320aic3x-codec 2-0018: ASoC: mux Right
> Line1L Mux has no paths
> [ 1.134307] tlv320aic3x-codec 2-0018: ASoC: mux Left Line1R
> Mux has no paths
> [ 1.137451] input: RX-51 AV Jack as /devices/platform/rx51-
> audio/sound/card0/input2
>
> I will try to investigate where is problem...
>
Ok, problem found and solved. Please drop my patch and sorry for
a noise.
As is visible in above lines AV Jack is working fine on non DT
kernel (3.12) and fails on DT kernel.
Reason is because I have another non-mainline driver which is
using GPIOs and in non DT kernel is initialized *after* audio.
And in DT kernel is initialized *before* audio.
Once I changed my non-mainline driver to not request av jack
gpio, rx51-audio driver loads fine in qemu.
--
Pali Rohár
pali.rohar@...il.com
Download attachment "signature.asc " of type "application/pgp-signature" (199 bytes)
Powered by blists - more mailing lists