| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <54CA7DCD.8080405@kernel.org>
Date: Thu, 29 Jan 2015 18:37:01 +0000
From: Jonathan Cameron <jic23@...nel.org>
To: Karol Wrona <k.wrona@...sung.com>, linux-iio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
CC: Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald <pmeerw@...erw.net>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Karol Wrona <wrona.vy@...il.com>
Subject: Re: [PATCH v5 4/5] iio: common: ssp_sensors: Add sensorhub accelerometer
sensor
On 28/01/15 14:05, Karol Wrona wrote:
> This patch adds accelerometer iio driver which uses sensorhub as data
> provider.
>
> Signed-off-by: Karol Wrona <k.wrona@...sung.com>
> Acked-by: Kyungmin Park <kyungmin.park@...sung.com>
Applied
> ---
> drivers/iio/accel/Makefile | 1 +
> drivers/iio/accel/ssp_accel_sensor.c | 169 ++++++++++++++++++++++++++++++++++
> 2 files changed, 170 insertions(+)
> create mode 100644 drivers/iio/accel/ssp_accel_sensor.c
>
> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
> index de5b9cb..69c64b6 100644
> --- a/drivers/iio/accel/Makefile
> +++ b/drivers/iio/accel/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
> obj-$(CONFIG_KXSD9) += kxsd9.o
> obj-$(CONFIG_MMA8452) += mma8452.o
> obj-$(CONFIG_MMA9551) += mma9551.o
> +obj-$(CONFIG_IIO_SSP_SENSORS_COMMONS) += ssp_accel_sensor.o
>
> obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o
> st_accel-y := st_accel_core.o
> diff --git a/drivers/iio/accel/ssp_accel_sensor.c b/drivers/iio/accel/ssp_accel_sensor.c
> new file mode 100644
> index 0000000..4ae05fc
> --- /dev/null
> +++ b/drivers/iio/accel/ssp_accel_sensor.c
> @@ -0,0 +1,169 @@
> +/*
> + * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/iio/common/ssp_sensors.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/kfifo_buf.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include "../common/ssp_sensors/ssp_iio_sensor.h"
> +
> +#define SSP_CHANNEL_COUNT 3
> +
> +#define SSP_ACCEL_NAME "ssp-accelerometer"
> +static const char ssp_accel_device_name[] = SSP_ACCEL_NAME;
> +
> +enum ssp_accel_3d_channel {
> + SSP_CHANNEL_SCAN_INDEX_X,
> + SSP_CHANNEL_SCAN_INDEX_Y,
> + SSP_CHANNEL_SCAN_INDEX_Z,
> + SSP_CHANNEL_SCAN_INDEX_TIME,
> +};
> +
> +static int ssp_accel_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val,
> + int *val2, long mask)
> +{
> + u32 t;
> + struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + t = ssp_get_sensor_delay(data, SSP_ACCELEROMETER_SENSOR);
> + ssp_convert_to_freq(t, val, val2);
> + return IIO_VAL_INT_PLUS_MICRO;
> + default:
> + break;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int ssp_accel_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val,
> + int val2, long mask)
> +{
> + int ret;
> + struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + ret = ssp_convert_to_time(val, val2);
> + ret = ssp_change_delay(data, SSP_ACCELEROMETER_SENSOR, ret);
> + if (ret < 0)
> + dev_err(&indio_dev->dev, "accel sensor enable fail\n");
> +
> + return ret;
> + default:
> + break;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static struct iio_info ssp_accel_iio_info = {
> + .read_raw = &ssp_accel_read_raw,
> + .write_raw = &ssp_accel_write_raw,
> +};
> +
> +static const unsigned long ssp_accel_scan_mask[] = { 0x7, 0, };
> +
> +static const struct iio_chan_spec ssp_acc_channels[] = {
> + SSP_CHANNEL_AG(IIO_ACCEL, IIO_MOD_X, SSP_CHANNEL_SCAN_INDEX_X),
> + SSP_CHANNEL_AG(IIO_ACCEL, IIO_MOD_Y, SSP_CHANNEL_SCAN_INDEX_Y),
> + SSP_CHANNEL_AG(IIO_ACCEL, IIO_MOD_Z, SSP_CHANNEL_SCAN_INDEX_Z),
> + SSP_CHAN_TIMESTAMP(SSP_CHANNEL_SCAN_INDEX_TIME),
> +};
> +
> +static int ssp_process_accel_data(struct iio_dev *indio_dev, void *buf,
> + int64_t timestamp)
> +{
> + return ssp_common_process_data(indio_dev, buf, SSP_ACCELEROMETER_SIZE,
> + timestamp);
> +}
> +
> +static const struct iio_buffer_setup_ops ssp_accel_buffer_ops = {
> + .postenable = &ssp_common_buffer_postenable,
> + .postdisable = &ssp_common_buffer_postdisable,
> +};
> +
> +static int ssp_accel_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct iio_dev *indio_dev;
> + struct ssp_sensor_data *spd;
> + struct iio_buffer *buffer;
> +
> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*spd));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + spd = iio_priv(indio_dev);
> +
> + spd->process_data = ssp_process_accel_data;
> + spd->type = SSP_ACCELEROMETER_SENSOR;
> +
> + indio_dev->name = ssp_accel_device_name;
> + indio_dev->dev.parent = &pdev->dev;
> + indio_dev->dev.of_node = pdev->dev.of_node;
> + indio_dev->info = &ssp_accel_iio_info;
> + indio_dev->modes = INDIO_BUFFER_SOFTWARE;
> + indio_dev->channels = ssp_acc_channels;
> + indio_dev->num_channels = ARRAY_SIZE(ssp_acc_channels);
> + indio_dev->available_scan_masks = ssp_accel_scan_mask;
> +
> + buffer = devm_iio_kfifo_allocate(&pdev->dev);
> + if (!buffer)
> + return -ENOMEM;
> +
> + iio_device_attach_buffer(indio_dev, buffer);
> +
> + indio_dev->setup_ops = &ssp_accel_buffer_ops;
> +
> + platform_set_drvdata(pdev, indio_dev);
> +
> + ret = iio_device_register(indio_dev);
> + if (ret < 0)
> + return ret;
> +
> + /* ssp registering should be done after all iio setup */
> + ssp_register_consumer(indio_dev, SSP_ACCELEROMETER_SENSOR);
> +
> + return 0;
> +}
> +
> +static int ssp_accel_remove(struct platform_device *pdev)
> +{
> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +
> + iio_device_unregister(indio_dev);
> +
> + return 0;
> +}
> +
> +static struct platform_driver ssp_accel_driver = {
> + .driver = {
> + .name = SSP_ACCEL_NAME,
> + },
> + .probe = ssp_accel_probe,
> + .remove = ssp_accel_remove,
> +};
> +
> +module_platform_driver(ssp_accel_driver);
> +
> +MODULE_AUTHOR("Karol Wrona <k.wrona@...sung.com>");
> +MODULE_DESCRIPTION("Samsung sensorhub accelerometers driver");
> +MODULE_LICENSE("GPL");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists