| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1422644602-11953-5-git-send-email-daniel.thompson@linaro.org>
Date: Fri, 30 Jan 2015 19:03:22 +0000
From: Daniel Thompson <daniel.thompson@...aro.org>
To: Thomas Gleixner <tglx@...utronix.de>,
John Stultz <john.stultz@...aro.org>
Cc: Daniel Thompson <daniel.thompson@...aro.org>,
linux-kernel@...r.kernel.org, patches@...aro.org,
linaro-kernel@...ts.linaro.org,
Sumit Semwal <sumit.semwal@...aro.org>,
Stephen Boyd <sboyd@...eaurora.org>,
Steven Rostedt <rostedt@...dmis.org>,
Russell King <linux@....linux.org.uk>,
Will Deacon <will.deacon@....com>,
Catalin Marinas <catalin.marinas@....com>
Subject: [PATCH v3 4/4] sched_clock: Avoid deadlock during read from NMI
Currently it is possible for an NMI (or FIQ on ARM) to come in and
read sched_clock() whilst update_sched_clock() has locked the seqcount
for writing. This results in the NMI handler locking up when it calls
raw_read_seqcount_begin().
This patch fixes the NMI safety issues by providing banked clock data.
This is a similar approach to the one used in Thomas Gleixner's
4396e058c52e("timekeeping: Provide fast and NMI safe access to
CLOCK_MONOTONIC").
Suggested-by: Stephen Boyd <sboyd@...eaurora.org>
Signed-off-by: Daniel Thompson <daniel.thompson@...aro.org>
Cc: Russell King <linux@....linux.org.uk>
Cc: Will Deacon <will.deacon@....com>
Cc: Catalin Marinas <catalin.marinas@....com>
---
kernel/time/sched_clock.c | 91 ++++++++++++++++++++++++++++++-----------------
1 file changed, 58 insertions(+), 33 deletions(-)
diff --git a/kernel/time/sched_clock.c b/kernel/time/sched_clock.c
index 638c765131fa..2b1a465f1c00 100644
--- a/kernel/time/sched_clock.c
+++ b/kernel/time/sched_clock.c
@@ -40,12 +40,12 @@ struct clock_read_data {
* registration of a new clock source)
*
* The ordering of this structure has been chosen to optimize cache
- * performance. In particular seq and read_data (combined) should fit
+ * performance. In particular seq and read_data[0] (combined) should fit
* into a single 64 byte cache line.
*/
struct clock_data {
seqcount_t seq;
- struct clock_read_data read_data;
+ struct clock_read_data read_data[2];
ktime_t wrap_kt;
unsigned long rate;
u64 (*actual_read_sched_clock)(void);
@@ -66,10 +66,9 @@ static u64 notrace jiffy_sched_clock_read(void)
}
static struct clock_data cd ____cacheline_aligned = {
- .read_data = { .mult = NSEC_PER_SEC / HZ,
- .read_sched_clock = jiffy_sched_clock_read, },
+ .read_data[0] = { .mult = NSEC_PER_SEC / HZ,
+ .read_sched_clock = jiffy_sched_clock_read, },
.actual_read_sched_clock = jiffy_sched_clock_read,
-
};
static inline u64 notrace cyc_to_ns(u64 cyc, u32 mult, u32 shift)
@@ -81,10 +80,11 @@ unsigned long long notrace sched_clock(void)
{
u64 cyc, res;
unsigned long seq;
- struct clock_read_data *rd = &cd.read_data;
+ struct clock_read_data *rd;
do {
- seq = raw_read_seqcount_begin(&cd.seq);
+ seq = raw_read_seqcount(&cd.seq);
+ rd = cd.read_data + (seq & 1);
res = rd->epoch_ns;
if (rd->read_sched_clock) {
@@ -98,26 +98,50 @@ unsigned long long notrace sched_clock(void)
}
/*
+ * Updating the data required to read the clock.
+ *
+ * sched_clock will never observe mis-matched data even if called from
+ * an NMI. We do this by maintaining an odd/even copy of the data and
+ * steering sched_clock to one or the other using a sequence counter.
+ * In order to preserve the data cache profile of sched_clock as much
+ * as possible the system reverts back to the even copy when the update
+ * completes; the odd copy is used *only* during an update.
+ */
+static void update_clock_read_data(struct clock_read_data *rd)
+{
+ /* update the backup (odd) copy with the new data */
+ cd.read_data[1] = *rd;
+
+ /* steer readers towards the new data */
+ raw_write_seqcount_latch(&cd.seq);
+
+ /* now its safe for us to update the normal (even) copy */
+ cd.read_data[0] = *rd;
+
+ /* switch readers back to the even copy */
+ raw_write_seqcount_latch(&cd.seq);
+}
+
+/*
* Atomically update the sched_clock epoch.
*/
static void notrace update_sched_clock(void)
{
- unsigned long flags;
u64 cyc;
u64 ns;
- struct clock_read_data *rd = &cd.read_data;
+ struct clock_read_data rd;
+
+ rd = cd.read_data[0];
cyc = cd.actual_read_sched_clock();
- ns = rd->epoch_ns +
- cyc_to_ns((cyc - rd->epoch_cyc) & rd->sched_clock_mask,
- rd->mult, rd->shift);
-
- raw_local_irq_save(flags);
- raw_write_seqcount_begin(&cd.seq);
- rd->epoch_ns = ns;
- rd->epoch_cyc = cyc;
- raw_write_seqcount_end(&cd.seq);
- raw_local_irq_restore(flags);
+ ns = rd.epoch_ns +
+ cyc_to_ns((cyc - rd.epoch_cyc) & rd.sched_clock_mask,
+ rd.mult, rd.shift);
+
+ rd.epoch_ns = ns;
+ rd.epoch_cyc = cyc;
+
+ update_clock_read_data(&rd);
}
static enum hrtimer_restart sched_clock_poll(struct hrtimer *hrt)
@@ -134,7 +158,7 @@ void __init sched_clock_register(u64 (*read)(void), int bits,
u32 new_mult, new_shift;
unsigned long r;
char r_unit;
- struct clock_read_data *rd = &cd.read_data;
+ struct clock_read_data rd;
if (cd.rate > rate)
return;
@@ -151,22 +175,23 @@ void __init sched_clock_register(u64 (*read)(void), int bits,
wrap = clocks_calc_max_nsecs(new_mult, new_shift, 0, new_mask);
cd.wrap_kt = ns_to_ktime(wrap - (wrap >> 3));
+ rd = cd.read_data[0];
+
/* update epoch for new counter and update epoch_ns from old counter*/
new_epoch = read();
cyc = cd.actual_read_sched_clock();
- ns = rd->epoch_ns +
- cyc_to_ns((cyc - rd->epoch_cyc) & rd->sched_clock_mask,
- rd->mult, rd->shift);
+ ns = rd.epoch_ns +
+ cyc_to_ns((cyc - rd.epoch_cyc) & rd.sched_clock_mask,
+ rd.mult, rd.shift);
cd.actual_read_sched_clock = read;
- raw_write_seqcount_begin(&cd.seq);
- rd->read_sched_clock = read;
- rd->sched_clock_mask = new_mask;
- rd->mult = new_mult;
- rd->shift = new_shift;
- rd->epoch_cyc = new_epoch;
- rd->epoch_ns = ns;
- raw_write_seqcount_end(&cd.seq);
+ rd.read_sched_clock = read;
+ rd.sched_clock_mask = new_mask;
+ rd.mult = new_mult;
+ rd.shift = new_shift;
+ rd.epoch_cyc = new_epoch;
+ rd.epoch_ns = ns;
+ update_clock_read_data(&rd);
r = rate;
if (r >= 4000000) {
@@ -213,7 +238,7 @@ void __init sched_clock_postinit(void)
static int sched_clock_suspend(void)
{
- struct clock_read_data *rd = &cd.read_data;
+ struct clock_read_data *rd = &cd.read_data[0];
update_sched_clock();
hrtimer_cancel(&sched_clock_timer);
@@ -223,7 +248,7 @@ static int sched_clock_suspend(void)
static void sched_clock_resume(void)
{
- struct clock_read_data *rd = &cd.read_data;
+ struct clock_read_data *rd = &cd.read_data[0];
rd->epoch_cyc = cd.actual_read_sched_clock();
hrtimer_start(&sched_clock_timer, cd.wrap_kt, HRTIMER_MODE_REL);
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists