linux-kernel - [PATCH v2 3/5] ARM: sa1100: use ioremapped memory to access SC registers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1422648066-7897-4-git-send-email-dbaryshkov@gmail.com>
Date:	Fri, 30 Jan 2015 23:01:04 +0300
From:	Dmitry Eremin-Solenikov <dbaryshkov@...il.com>
To:	Russell King <linux@....linux.org.uk>,
	Thomas Gleixner <tglx@...utronix.de>,
	Jason Cooper <jason@...edaemon.net>
Cc:	linux-arm-kernel@...ts.infradead.org,
	Linus Walleij <linus.walleij@...aro.org>,
	Andrea Adami <andrea.adami@...il.com>,
	linux-kernel@...r.kernel.org
Subject: [PATCH v2 3/5] ARM: sa1100: use ioremapped memory to access SC registers

Use ioremap() and readl/writel_relaxed() to access IRQ controller
registers.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@...il.com>
---
 arch/arm/mach-sa1100/irq.c | 52 ++++++++++++++++++++++++++++++----------------
 1 file changed, 34 insertions(+), 18 deletions(-)

diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 6afaa33..08f929e 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -20,13 +20,19 @@
 
 #include <soc/sa1100/pwer.h>
 
-#include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <asm/mach/irq.h>
 #include <asm/exception.h>
 
 #include "generic.h"
 
+#define ICIP	0x00  /* IC IRQ Pending reg. */
+#define ICMR	0x04  /* IC Mask Reg.        */
+#define ICLR	0x08  /* IC Level Reg.       */
+#define ICCR	0x0C  /* IC Control Reg.     */
+#define ICFP	0x10  /* IC FIQ Pending reg. */
+#define ICPR	0x20  /* IC Pending Reg.     */
+
+static void __iomem *iobase;
 
 /*
  * We don't need to ACK IRQs on the SA1100 unless they're GPIOs
@@ -34,12 +40,20 @@
  */
 static void sa1100_mask_irq(struct irq_data *d)
 {
-	ICMR &= ~BIT(d->hwirq);
+	u32 reg;
+
+	reg = readl_relaxed(iobase + ICMR);
+	reg &= ~BIT(d->hwirq);
+	writel_relaxed(reg, iobase + ICMR);
 }
 
 static void sa1100_unmask_irq(struct irq_data *d)
 {
-	ICMR |= BIT(d->hwirq);
+	u32 reg;
+
+	reg = readl_relaxed(iobase + ICMR);
+	reg |= BIT(d->hwirq);
+	writel_relaxed(reg, iobase + ICMR);
 }
 
 static int sa1100_set_wake(struct irq_data *d, unsigned int on)
@@ -87,16 +101,14 @@ static int sa1100irq_suspend(void)
 	struct sa1100irq_state *st = &sa1100irq_state;
 
 	st->saved = 1;
-	st->icmr = ICMR;
-	st->iclr = ICLR;
-	st->iccr = ICCR;
+	st->icmr = readl_relaxed(iobase + ICMR);
+	st->iclr = readl_relaxed(iobase + ICLR);
+	st->iccr = readl_relaxed(iobase + ICCR);
 
 	/*
 	 * Disable all GPIO-based interrupts.
 	 */
-	ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7|
-		  IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
-		  IC_GPIO1|IC_GPIO0);
+	writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR);
 
 	return 0;
 }
@@ -106,10 +118,10 @@ static void sa1100irq_resume(void)
 	struct sa1100irq_state *st = &sa1100irq_state;
 
 	if (st->saved) {
-		ICCR = st->iccr;
-		ICLR = st->iclr;
+		writel_relaxed(st->iccr, iobase + ICCR);
+		writel_relaxed(st->iclr, iobase + ICLR);
 
-		ICMR = st->icmr;
+		writel_relaxed(st->icmr, iobase + ICMR);
 	}
 }
 
@@ -132,8 +144,8 @@ sa1100_handle_irq(struct pt_regs *regs)
 	uint32_t icip, icmr, mask;
 
 	do {
-		icip = (ICIP);
-		icmr = (ICMR);
+		icip = readl_relaxed(iobase + ICIP);
+		icmr = readl_relaxed(iobase + ICMR);
 		mask = icip & icmr;
 
 		if (mask == 0)
@@ -148,17 +160,21 @@ void __init sa1100_init_irq(void)
 {
 	request_resource(&iomem_resource, &irq_resource);
 
+	iobase = ioremap(irq_resource.start, SZ_64K);
+	if (WARN_ON(!iobase))
+		return;
+
 	/* disable all IRQs */
-	ICMR = 0;
+	writel_relaxed(0, iobase + ICMR);
 
 	/* all IRQs are IRQ, not FIQ */
-	ICLR = 0;
+	writel_relaxed(0, iobase + ICLR);
 
 	/*
 	 * Whatever the doc says, this has to be set for the wait-on-irq
 	 * instruction to work... on a SA1100 rev 9 at least.
 	 */
-	ICCR = 1;
+	writel_relaxed(1, iobase + ICCR);
 
 	sa1100_normal_irqdomain = irq_domain_add_simple(NULL,
 			32, IRQ_GPIO0_SC,
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/