| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAGb2v67-znKNUVJQPVJqMXhiHEyfkjBGZFPc5hW+w0ODQ+HMmg@mail.gmail.com>
Date: Sat, 31 Jan 2015 17:49:38 +0100
From: Chen-Yu Tsai <wens@...e.org>
To: Lee Jones <lee.jones@...aro.org>
Cc: Mark Brown <broonie@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Grant Likely <grant.likely@...aro.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Carlo Caione <carlo@...one.org>,
devicetree <devicetree@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v9 2/5] mfd: AXP20x: Add bindings documentation
Hi Lee,
On Thu, Jan 22, 2015 at 5:02 PM, Lee Jones <lee.jones@...aro.org> wrote:
> On Thu, 22 Jan 2015, Chen-Yu Tsai wrote:
>
>> From: Carlo Caione <carlo@...one.org>
>>
>> Bindings documentation for the AXP20x driver. In this file also
>> sub-nodes are documented.
>>
>> Signed-off-by: Carlo Caione <carlo@...one.org>
>> Acked-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
>> [wens@...e.org: clarify interrupt source for the axp PMIC]
>> [wens@...e.org: explain dcdc-workmode in detail and trim lines to 80 chars]
>> [wens@...e.org: make regulator supplies optional if using unregulated input]
>> [wens@...e.org: use cubieboard2 regulator nodes as example]
>> [wens@...e.org: change dcdc-workmode to dcdc-workmode-pwm boolean property]
>> [wens@...e.org: use clock-frequency for dcdc regulator work frequency]
>> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
>> ---
>> Documentation/devicetree/bindings/mfd/axp20x.txt | 102 +++++++++++++++++++++++
>> 1 file changed, 102 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mfd/axp20x.txt
>
> This looks okay to me now.
>
> If Mark is happy with the remainder, I'll merge this.
So Mark is not happy with this actually, for a few reasons:
1. The driver was already merged a couple versions back, and
we have been using the dcdc-freq binding.
2. Furthermore, the dcdc-freq binding has nothing to do with
the common clock framework. Using the clock-frequencies
binding implies it does.
3. The change from a integer value to a boolean flag for
dcdc-mode makes it less capable, i.e. the kernel can't
just accept the current state of the hardware, which
should be a valid option for regulators to not screw
up the system accidentally.
Any chance you could merge the previous version (v8)?
Regards,
ChenYu
> For my own reference:
> Acked-by: Lee Jones <lee.jones@...aro.org>
>
>> diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
>> new file mode 100644
>> index 000000000000..c3c80db242c7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
>> @@ -0,0 +1,102 @@
>> +AXP202/AXP209 device tree bindings
>> +
>> +The axp20x family current members :
>> +axp202 (X-Powers)
>> +axp209 (X-Powers)
>> +
>> +Required properties:
>> +- compatible: "x-powers,axp202" or "x-powers,axp209"
>> +- reg: The I2C slave address for the AXP chip
>> +- interrupt-parent: The parent interrupt controller
>> +- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
>> +- interrupt-controller: axp20x has its own internal IRQs
>> +- #interrupt-cells: Should be set to 1
>> +- regulators: A node that houses a sub-node for each regulator. The regulators
>> + are bound using their name as listed here: dcdc2, dcdc3, ldo1,
>> + ldo2, ldo3, ldo4, ldo5. The bindings details of individual
>> + regulator device can be found in:
>> + Documentation/devicetree/bindings/regulator/regulator.txt with
>> + the exception of x-powers,dcdc-freq. Regulators not used should
>> + still be listed for completeness and that the regulator subsystem
>> + properly registers them.
>> +
>> +Optional properties:
>> +- regulator supplies - may be omitted if inputs are unregulated, such as using
>> + the IPSOUT output from the PMIC
>> + - acin-supply: The input supply for LDO1
>> + - vin2-supply: The input supply for DCDC2
>> + - vin3-supply: The input supply for DCDC3
>> + - ldo24in-supply: The input supply for LDO2, LDO4
>> + - ldo3in-supply: The input supply for LDO3
>> + - ldo5in-supply: The input supply for LDO5
>> +
>> +Optional properties for regulators node:
>> +- clock-frequency: defines the work frequency of DC-DC regulators
>> + (range: 750kHz - 1875kHz). Default: 1.5MHz
>> +
>> +Optional properties for DCDC regulators:
>> +- x-powers,dcdc-workmode-pwm: Force the DCDC regulators to run in PWM mode
>> + The DCDC regulators rormally work in a mixed
>> + PWM/PFM mode, using PFM under light loads and
>> + switching to PWM for heavier loads. Forcing
>> + PWM mode trades efficiency under light loads
>> + for lower output noise. This probably makes
>> + sense for HiFi audio related applications that
>> + aren't battery constrained.
>> +
>> +Example:
>> +
>> +axp209: pmic@34 {
>> + compatible = "x-powers,axp209";
>> + reg = <0x34>;
>> + interrupt-parent = <&nmi_intc>;
>> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>> + interrupt-controller;
>> + #interrupt-cells = <1>;
>> +
>> + regulators {
>> + clock-frequency = <1500000>;
>> +
>> + vdd_cpu: dcdc2 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1450000>;
>> + regulator-name = "vdd-cpu";
>> + };
>> +
>> + vdd_int_dll: dcdc3 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-name = "vdd-int-dll";
>> + };
>> +
>> + vdd_rtc: ldo1 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-name = "vdd-rtc";
>> + };
>> +
>> + avcc: ldo2 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <2700000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-name = "avcc";
>> + };
>> +
>> + ldo3 {
>> + /* unused */
>> + };
>> +
>> + csi1_io_2v8: ldo4 {
>> + /* output on extension headers */
>> + regulator-name = "csi1-io-2v8";
>> + };
>> +
>> + ldo5 {
>> + /* unused */
>> + };
>> + };
>> +};
>> +
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists