early console in setup code Probing EDD (edd=off to disable)... ok early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.19.0-rc5-wl-ga224126 (kbuild@cairo) (gcc version 4.9.1 (Debian 4.9.1-19) ) #1 SMP Fri Jan 23 05:04:02 CST 2015 [ 0.000000] Command line: user=lkp job=/lkp/scheduled/vm-vp-2G-2/rand_boot-1-debian-x86_64.cgz-x86_64-rhel-a224126be542547c3d3040d2b4c145c0c024cc04-1.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/a224126be542547c3d3040d2b4c145c0c024cc04/vmlinuz-3.19.0-rc5-wl-ga224126 kconfig=x86_64-rhel commit=a224126be542547c3d3040d2b4c145c0c024cc04 branch=linux-devel/devel-hourly-2015012300 root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-vp-2G/boot/1/debian-x86_64-2015-01-13.cgz/x86_64-rhel/a224126be542547c3d3040d2b4c145c0c024cc04/0 ip=::::vm-vp-2G-2::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fffe000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x7fffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC UC UC UC UC [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at [ffff8800000fda90] [ 0.000000] mpc: fdaa0-fdbe4 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x021f1000, 0x021f1fff] PGTABLE [ 0.000000] BRK [0x021f2000, 0x021f2fff] PGTABLE [ 0.000000] BRK [0x021f3000, 0x021f3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x78200000-0x783fffff] [ 0.000000] [mem 0x78200000-0x783fffff] page 2M [ 0.000000] BRK [0x021f4000, 0x021f4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x60000000-0x781fffff] [ 0.000000] [mem 0x60000000-0x781fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff] [ 0.000000] [mem 0x40000000-0x5fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x78400000-0x7fffdfff] [ 0.000000] [mem 0x78400000-0x7fdfffff] page 2M [ 0.000000] [mem 0x7fe00000-0x7fffdfff] page 4k [ 0.000000] BRK [0x021f5000, 0x021f5fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x78560000-0x7ffeffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FD8B0 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000007FFFE380 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000007FFFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000007FFFE3C0 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0x000000007FFFFF40 000040 [ 0.000000] ACPI: SSDT 0x000000007FFFF6E0 000858 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x000000007FFFF5B0 000090 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x000000007FFFF570 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fffdfff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7853a000-0x7855ffff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:784ba001, primary cpu clock [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880075c00000-ffff880077bfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0x7fffdfff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x7fffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x7fffdfff] [ 0.000000] On node 0 totalpages: 524188 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8128 pages used for memmap [ 0.000000] DMA32 zone: 520190 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000) [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff880078200000 s89472 r8192 d29312 u524288 [ 0.000000] pcpu-alloc: s89472 r8192 d29312 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 7820e240 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515975 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/vm-vp-2G-2/rand_boot-1-debian-x86_64.cgz-x86_64-rhel-a224126be542547c3d3040d2b4c145c0c024cc04-1.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/a224126be542547c3d3040d2b4c145c0c024cc04/vmlinuz-3.19.0-rc5-wl-ga224126 kconfig=x86_64-rhel commit=a224126be542547c3d3040d2b4c145c0c024cc04 branch=linux-devel/devel-hourly-2015012300 root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-vp-2G/boot/1/debian-x86_64-2015-01-13.cgz/x86_64-rhel/a224126be542547c3d3040d2b4c145c0c024cc04/0 ip=::::vm-vp-2G-2::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 1918584K/2096752K available (8914K kernel code, 1718K rwdata, 3952K rodata, 1848K init, 1876K bss, 178168K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:524544 nr_irqs:456 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.19.0-rc5-wl-ga224126 (kbuild@cairo) (gcc version 4.9.1 (Debian 4.9.1-19) ) #1 SMP Fri Jan 23 05:04:02 CST 2015 [ 0.000000] Command line: user=lkp job=/lkp/scheduled/vm-vp-2G-2/rand_boot-1-debian-x86_64.cgz-x86_64-rhel-a224126be542547c3d3040d2b4c145c0c024cc04-1.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/a224126be542547c3d3040d2b4c145c0c024cc04/vmlinuz-3.19.0-rc5-wl-ga224126 kconfig=x86_64-rhel commit=a224126be542547c3d3040d2b4c145c0c024cc04 branch=linux-devel/devel-hourly-2015012300 root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-vp-2G/boot/1/debian-x86_64-2015-01-13.cgz/x86_64-rhel/a224126be542547c3d3040d2b4c145c0c024cc04/0 ip=::::vm-vp-2G-2::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fffe000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x7fffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC UC UC UC UC [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at [ffff8800000fda90] [ 0.000000] mpc: fdaa0-fdbe4 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x021f1000, 0x021f1fff] PGTABLE [ 0.000000] BRK [0x021f2000, 0x021f2fff] PGTABLE [ 0.000000] BRK [0x021f3000, 0x021f3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x78200000-0x783fffff] [ 0.000000] [mem 0x78200000-0x783fffff] page 2M [ 0.000000] BRK [0x021f4000, 0x021f4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x60000000-0x781fffff] [ 0.000000] [mem 0x60000000-0x781fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff] [ 0.000000] [mem 0x40000000-0x5fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x78400000-0x7fffdfff] [ 0.000000] [mem 0x78400000-0x7fdfffff] page 2M [ 0.000000] [mem 0x7fe00000-0x7fffdfff] page 4k [ 0.000000] BRK [0x021f5000, 0x021f5fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x78560000-0x7ffeffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FD8B0 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000007FFFE380 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000007FFFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000007FFFE3C0 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0x000000007FFFFF40 000040 [ 0.000000] ACPI: SSDT 0x000000007FFFF6E0 000858 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x000000007FFFF5B0 000090 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x000000007FFFF570 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fffdfff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7853a000-0x7855ffff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:784ba001, primary cpu clock [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880075c00000-ffff880077bfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0x7fffdfff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x7fffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x7fffdfff] [ 0.000000] On node 0 totalpages: 524188 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8128 pages used for memmap [ 0.000000] DMA32 zone: 520190 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000) [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff880078200000 s89472 r8192 d29312 u524288 [ 0.000000] pcpu-alloc: s89472 r8192 d29312 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 7820e240 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515975 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/vm-vp-2G-2/rand_boot-1-debian-x86_64.cgz-x86_64-rhel-a224126be542547c3d3040d2b4c145c0c024cc04-1.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/a224126be542547c3d3040d2b4c145c0c024cc04/vmlinuz-3.19.0-rc5-wl-ga224126 kconfig=x86_64-rhel commit=a224126be542547c3d3040d2b4c145c0c024cc04 branch=linux-devel/devel-hourly-2015012300 root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-vp-2G/boot/1/debian-x86_64-2015-01-13.cgz/x86_64-rhel/a224126be542547c3d3040d2b4c145c0c024cc04/0 ip=::::vm-vp-2G-2::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 1918584K/2096752K available (8914K kernel code, 1718K rwdata, 3952K rodata, 1848K init, 1876K bss, 178168K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:524544 nr_irqs:456 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2693.570 MHz processor [ 0.003000] Calibrating delay loop (skipped) preset value.. 5387.14 BogoMIPS (lpj=2693570) [ 0.003438] pid_max: default: 32768 minimum: 301 [ 0.004010] ACPI: Core revision 20141107 [ 0.006280] ACPI: All ACPI Tables successfully acquired [ 0.007151] Security Framework initialized [ 0.007752] SELinux: Initializing. [ 0.008012] SELinux: Starting in permissive mode [ 0.009133] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.011291] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.012151] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.013008] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.014302] Initializing cgroup subsys blkio [ 0.015008] Initializing cgroup subsys memory [ 0.016010] Initializing cgroup subsys devices [ 0.017008] Initializing cgroup subsys freezer [ 0.018007] Initializing cgroup subsys net_cls [ 0.018898] Initializing cgroup subsys perf_event [ 0.019006] Initializing cgroup subsys hugetlb [ 0.020073] mce: CPU supports 10 MCE banks [ 0.021045] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.021045] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.022172] Freeing SMP alternatives memory: 36K (ffffffff82011000 - ffffffff8201a000) [ 0.027296] ftrace: allocating 31640 entries in 124 pages [ 0.035183] Getting VERSION: 50014 [ 0.036015] Getting VERSION: 50014 [ 0.037009] Getting ID: 0 [ 0.037620] Getting ID: ff000000 [ 0.038011] Getting LVT0: 8700 [ 0.039007] Getting LVT1: 8400 [ 0.039715] enabled ExtINT on CPU#0 [ 0.041239] ENABLING IO-APIC IRQs [ 0.041932] init IO_APIC IRQs [ 0.042004] apic 0 pin 0 not connected [ 0.043008] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.044019] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.045018] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.046016] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.047017] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.048017] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.049022] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.050017] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.051017] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.052016] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.053017] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.054017] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.055017] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.056017] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.057017] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.058017] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.059014] apic 0 pin 16 not connected [ 0.060003] apic 0 pin 17 not connected [ 0.060746] apic 0 pin 18 not connected [ 0.061002] apic 0 pin 19 not connected [ 0.062003] apic 0 pin 20 not connected [ 0.063003] apic 0 pin 21 not connected [ 0.064003] apic 0 pin 22 not connected [ 0.064744] apic 0 pin 23 not connected [ 0.065146] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066003] Using local APIC timer interrupts. [ 0.066003] calibrating APIC timer ... [ 0.068000] ... lapic delta = 6249809 [ 0.068000] ... PM-Timer delta = 357938 [ 0.068000] ... PM-Timer result ok [ 0.068000] ..... delta 6249809 [ 0.068000] ..... mult: 268427252 [ 0.068000] ..... calibration result: 999969 [ 0.068000] ..... CPU clock speed is 2693.0286 MHz. [ 0.068000] ..... host bus clock speed is 999.0969 MHz. [ 0.068047] smpboot: CPU0: Intel Core 2 Duo P9xxx (Penryn Class Core 2) (fam: 06, model: 17, stepping: 03) [ 0.070026] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only. [ 0.073074] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.074234] x86: Booting SMP configuration: [ 0.075003] .... node #0, CPUs: #1 [ 0.073033] kvm-clock: cpu 1, msr 0:784ba041, secondary cpu clock [ 0.073033] masked ExtINT on CPU#1 [ 0.089021] KVM setup async PF for cpu 1 [ 0.090000] #2 [ 0.090000] kvm-stealtime: cpu 1, msr 7828e240 [ 0.089041] kvm-clock: cpu 2, msr 0:784ba081, secondary cpu clock [ 0.089041] masked ExtINT on CPU#2 [ 0.103013] KVM setup async PF for cpu 2 [ 0.103865] #3 [ 0.103865] kvm-stealtime: cpu 2, msr 7830e240 [ 0.103030] kvm-clock: cpu 3, msr 0:784ba0c1, secondary cpu clock [ 0.103030] masked ExtINT on CPU#3 [ 0.116030] x86: Booted up 1 node, 4 CPUs [ 0.116014] KVM setup async PF for cpu 3 [ 0.116017] kvm-stealtime: cpu 3, msr 7838e240 [ 0.119003] smpboot: Total of 4 processors activated (21548.56 BogoMIPS) [ 0.121199] devtmpfs: initialized [ 0.123739] evm: security.selinux [ 0.124003] evm: security.ima [ 0.125002] evm: security.capability [ 0.126238] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.127242] NET: Registered protocol family 16 [ 0.131015] cpuidle: using governor menu [ 0.132183] ACPI: bus type PCI registered [ 0.132947] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.133111] PCI: Using configuration type 1 for base access [ 0.139121] ACPI: Added _OSI(Module Device) [ 0.140004] ACPI: Added _OSI(Processor Device) [ 0.140815] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.141004] ACPI: Added _OSI(Processor Aggregator Device) [ 0.143189] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:15) [ 0.146451] ACPI: Interpreter enabled [ 0.147007] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580) [ 0.148541] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.150545] ACPI: (supports S0 S3 S4 S5) [ 0.151003] ACPI: Using IOAPIC for interrupt routing [ 0.152017] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.156759] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.157009] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.158008] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.160140] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.162322] acpiphp: Slot [3] registered [ 0.163033] acpiphp: Slot [4] registered [ 0.163799] acpiphp: Slot [5] registered [ 0.164025] acpiphp: Slot [6] registered [ 0.165025] acpiphp: Slot [7] registered [ 0.166025] acpiphp: Slot [8] registered [ 0.166786] acpiphp: Slot [9] registered [ 0.167026] acpiphp: Slot [10] registered [ 0.168032] acpiphp: Slot [11] registered [ 0.169025] acpiphp: Slot [12] registered [ 0.170025] acpiphp: Slot [13] registered [ 0.170796] acpiphp: Slot [14] registered [ 0.171025] acpiphp: Slot [15] registered [ 0.172127] acpiphp: Slot [24] registered [ 0.173025] acpiphp: Slot [25] registered [ 0.174032] acpiphp: Slot [26] registered [ 0.174804] acpiphp: Slot [27] registered [ 0.175025] acpiphp: Slot [28] registered [ 0.176025] acpiphp: Slot [29] registered [ 0.177025] acpiphp: Slot [30] registered [ 0.177793] acpiphp: Slot [31] registered [ 0.178012] PCI host bridge to bus 0000:00 [ 0.179004] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.180004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.181003] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.182003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.183003] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.184036] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.186049] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.187487] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.191004] pci 0000:00:01.1: reg 0x20: [io 0xc1c0-0xc1cf] [ 0.193028] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.194003] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.195003] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.196003] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.197166] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.199168] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.200012] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.201218] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.203633] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.205048] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.212611] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.214346] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.216004] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 0.218007] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.224004] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.225202] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.227494] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [ 0.229004] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [ 0.235355] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.237509] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0bf] [ 0.239512] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff] [ 0.246174] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.248004] pci 0000:00:06.0: reg 0x10: [io 0xc0c0-0xc0ff] [ 0.250004] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff] [ 0.256331] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.258503] pci 0000:00:07.0: reg 0x10: [io 0xc100-0xc13f] [ 0.260004] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff] [ 0.266329] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.268510] pci 0000:00:08.0: reg 0x10: [io 0xc140-0xc17f] [ 0.270513] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff] [ 0.277110] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.279004] pci 0000:00:09.0: reg 0x10: [io 0xc180-0xc1bf] [ 0.281004] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff] [ 0.287303] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000 [ 0.288536] pci 0000:00:0a.0: reg 0x10: [mem 0xfebf7000-0xfebf700f] [ 0.293793] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.295114] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.296722] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.298109] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.299558] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.301317] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.302304] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.302991] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.303004] vgaarb: loaded [ 0.303601] vgaarb: bridge control possible 0000:00:02.0 [ 0.304249] SCSI subsystem initialized [ 0.305050] ACPI: bus type USB registered [ 0.306049] usbcore: registered new interface driver usbfs [ 0.307019] usbcore: registered new interface driver hub [ 0.308104] usbcore: registered new device driver usb [ 0.309053] pps_core: LinuxPPS API ver. 1 registered [ 0.310002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.311016] PTP clock support registered [ 0.313063] PCI: Using ACPI for IRQ routing [ 0.314007] PCI: pci_cache_line_size set to 64 bytes [ 0.315198] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.316008] e820: reserve RAM buffer [mem 0x7fffe000-0x7fffffff] [ 0.317240] NetLabel: Initializing [ 0.318005] NetLabel: domain hash size = 128 [ 0.319002] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.319902] NetLabel: unlabeled traffic allowed by default [ 0.321127] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.322024] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.323398] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.328103] Switched to clocksource kvm-clock [ 0.343363] pnp: PnP ACPI init [ 0.344105] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:15) [ 0.345575] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.346676] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:15) [ 0.348135] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.349226] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:15) [ 0.350703] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.351809] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:15) [ 0.353259] pnp 00:03: [dma 2] [ 0.353910] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.355054] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:15) [ 0.356519] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.357641] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:15) [ 0.359104] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.360222] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:15) [ 0.361690] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.362967] pnp: PnP ACPI: found 7 devices [ 0.374243] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.375215] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.376162] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.377202] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 0.378314] NET: Registered protocol family 2 [ 0.379422] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.380873] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.382148] TCP: Hash tables configured (established 16384 bind 16384) [ 0.383312] TCP: reno registered [ 0.383975] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.385015] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.386177] NET: Registered protocol family 1 [ 0.387315] RPC: Registered named UNIX socket transport module. [ 0.388321] RPC: Registered udp transport module. [ 0.389155] RPC: Registered tcp transport module. [ 0.389989] RPC: Registered tcp NFSv4.1 backchannel transport module