| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 02 Feb 2015 14:06:55 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: Roger Quadros <rogerq@...com>
Cc: myungjoo.ham@...sung.com, balbi@...com, tony@...mide.com,
george.cherian@...com, nsekhar@...com, devicetree@...r.kernel.org,
linux-usb@...r.kernel.org, linux-omap@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/7] extcon: usb-gpio: Introduce gpio usb extcon driver
Hi Roger,
On 01/30/2015 11:03 PM, Roger Quadros wrote:
> On 30/01/15 02:11, Chanwoo Choi wrote:
>> Hi Roger,
>>
>> On 01/28/2015 09:15 PM, Roger Quadros wrote:
>>> This driver observes the USB ID pin connected over a GPIO and
>>> updates the USB cable extcon states accordingly.
>>>
>>> The existing GPIO extcon driver is not suitable for this purpose
>>> as it needs to be taught to understand USB cable states and it
>>> can't handle more than one cable per instance.
>>>
>>> For the USB case we need to handle 2 cable states.
>>> 1) USB (attach/detach)
>>> 2) USB-Host (attach/detach)
>>>
>>> This driver can be easily updated in the future to handle VBUS
>>> events in case it happens to be available on GPIO for any platform.
>>>
>>> Signed-off-by: Roger Quadros <rogerq@...com>
>>> ---
>>> v3:
>>> - removed IRQF_NO_SUSPEND flag. Added IRQF_TRIGGER_RISING and
>>> IRQF_TRIGGER_FALLING
>>> - Added disable_irq() to suspend() and enable_irq() to resume()
>>>
>>> .../devicetree/bindings/extcon/extcon-usb-gpio.txt | 18 ++
>>> drivers/extcon/Kconfig | 7 +
>>> drivers/extcon/Makefile | 1 +
>>> drivers/extcon/extcon-usb-gpio.c | 233 +++++++++++++++++++++
>>> 4 files changed, 259 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
>>> create mode 100644 drivers/extcon/extcon-usb-gpio.c
>>>
>>> diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
>>> new file mode 100644
>>> index 0000000..85fe6b0
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
>>> @@ -0,0 +1,18 @@
>>> +USB GPIO Extcon device
>>> +
>>> +This is a virtual device used to generate USB cable states from the USB ID pin
>>> +connected to a GPIO pin.
>>> +
>>> +Required properties:
>>> +- compatible: Should be "linux,extcon-usb-gpio"
>>> +- id-gpio: gpio for USB ID pin. See gpio binding.
>>> +
>>> +Example:
>>> + extcon_usb1 {
>>> + compatible = "linux,extcon-usb-gpio";
>>> + id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
>>> + }
>>> +
>>> + &omap_dwc3_1 {
>>> + extcon = <&extcon_usb1>;
>>> + };
>>> diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
>>> index 6a1f7de..fd11536 100644
>>> --- a/drivers/extcon/Kconfig
>>> +++ b/drivers/extcon/Kconfig
>>> @@ -93,4 +93,11 @@ config EXTCON_SM5502
>>> Silicon Mitus SM5502. The SM5502 is a USB port accessory
>>> detector and switch.
>>>
>>> +config EXTCON_USB_GPIO
>>> + tristate "USB GPIO extcon support"
>>> + select GPIOLIB
>>> + help
>>> + Say Y here to enable GPIO based USB cable detection extcon support.
>>> + Used typically if GPIO is used for USB ID pin detection.
>>> +
>>> endif # MULTISTATE_SWITCH
>>> diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
>>> index 0370b42..6a08a98 100644
>>> --- a/drivers/extcon/Makefile
>>> +++ b/drivers/extcon/Makefile
>>> @@ -12,3 +12,4 @@ obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o
>>> obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o
>>> obj-$(CONFIG_EXTCON_RT8973A) += extcon-rt8973a.o
>>> obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o
>>> +obj-$(CONFIG_EXTCON_USB_GPIO) += extcon-usb-gpio.o
>>> diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
>>> new file mode 100644
>>> index 0000000..99a58b2
>>> --- /dev/null
>>> +++ b/drivers/extcon/extcon-usb-gpio.c
>>> @@ -0,0 +1,233 @@
>>> +/**
>>> + * drivers/extcon/extcon-usb-gpio.c - USB GPIO extcon driver
>>> + *
>>> + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
>>> + * Author: Roger Quadros <rogerq@...com>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 as
>>> + * published by the Free Software Foundation.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + */
>>> +
>>> +#include <linux/extcon.h>
>>> +#include <linux/init.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/irq.h>
>>> +#include <linux/kernel.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of_gpio.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/slab.h>
>>> +#include <linux/workqueue.h>
>>> +
>>> +#define USB_GPIO_DEBOUNCE_MS 20 /* ms */
>>> +
>>> +struct usb_extcon_info {
>>> + struct device *dev;
>>> + struct extcon_dev *edev;
>>> +
>>> + struct gpio_desc *id_gpiod;
>>> + int id_irq;
>>> + bool id_irqwake; /* ID wakeup enabled flag */
>>> +
>>> + unsigned long debounce_jiffies;
>>> + struct delayed_work wq_detcable;
>>> +};
>>> +
>>> +/* List of detectable cables */
>>> +enum {
>>> + EXTCON_CABLE_USB = 0,
>>> + EXTCON_CABLE_USB_HOST,
>>> +
>>> + EXTCON_CABLE_END,
>>> +};
>>> +
>>> +static const char *usb_extcon_cable[] = {
>>> + [EXTCON_CABLE_USB] = "USB",
>>> + [EXTCON_CABLE_USB_HOST] = "USB-Host",
>>
>> I'll use the defined name for extcon cable name as soon because
>> it has potential isseu about the conflict of extcon cable name between subsystems.
>> So, I recommend to use a captical letter as "USB-HOST" instead of "USB-Host".
>> If other extcon driver don't use the captical letter, I'll fix it.
>
> Did you see patch 2 in this series?
> In that I had fixed all instances to use "USB-Host" based on
> http://lxr.free-electrons.com/source/drivers/extcon/extcon-class.c#L45
>
> What do you suggest?
> Skip patch 2 and convert all "USB-Host" to "USB-HOST"?
I replied my opinion about this on following patch[1].
[1] Re: [PATCH v2 2/7] usb: extcon: Fix USB-Host cable name
Thanks,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists