Message-Id: <1422975418-13302-1-git-send-email-ykk@rock-chips.com>
Date:	Tue,  3 Feb 2015 09:56:58 -0500
From:	Yakir Yang <ykk@...k-chips.com>
To:	David Airlie <airlied@...ux.ie>,
	Russell King <rmk+kernel@....linux.org.uk>,
	Philipp Zabel <p.zabel@...gutronix.de>
Cc:	Fabio Estevam <fabio.estevam@...escale.com>,
	Shawn Guo <shawn.guo@...aro.org>,
	Rob Clark <robdclark@...il.com>,
	Mark Yao <mark.yao@...k-chips.com>,
	Daniel Vetter <daniel@...ll.ch>,
	Yakir Yang <ykk@...k-chips.com>,
	dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
	Arnd Bergmann <arnd@...db.de>, Sean Cross <xobs@...agi.com>,
	Jyri Sarha <jsarha@...com>, Ben Zhang <benzh@...omium.org>,
	alsa-devel@...a-project.org, Heiko Stuebner <heiko@...ech.de>,
	linux-arm-kernel@...ts.infradead.org,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org,
	djkurtz@...omium.org, dbehr@...omoum.org, mmind00@...glemail.com,
	dianders@...omium.org, marcheu@...omium.org,
	linux-rockchip@...ts.infradead.org
Subject: [PATCH v3 0/15] Those patches is used for dw_hdmi audio support


We found Designware hdmi driver only support audio clock config, we can not play sound through it.
To add Designware HDMI Audio support, we make those patch set:
1): fixed dw_hdmi irq bug, add irq control to suspend/resume interfaces.
2): add suspend/resume callback for dw_hdmi rockchip driver.
3): Warp irq control in functions.
4): Combine hdmi_set_clock_regenerator_n() and hdmi_regenerate_cts()
5): Adjust n/cts config order.
6): Set ncts_atomic_write & cts_manual, according to dw_hdmi document.
7): Add audio support for more display resolutions(eg. 800x600).
8): Add audio support for No-CEA display resolutions.
9): Add Audio Sample Channel Status config interfaces to dw_hdmi driver.
10): add audio clock control interfaces o dw_hdmi driver.
11): creat "dw_hdmi-audio" platform device in dw_hdmi driver.
12): add codec driver for hdmi audio, callback dw_hdmi audio config functions.
13): add sound driver for hdmi audio, creat hdmi audio sound card.
14): add dt-bings file and add hdmi_audio node to corresponding dt file.


Changes in v3:
- Clear Hotplug interrupts before dw_hdmi_fb_register
- Wrap irq control in fucntions
- Setting the .pm member instead of suspend/resume
- Add ID registers parse and record
- Combine hdmi_set_clock_regenerator_n() and hdmi_regenerate_cts()
- Only adjust the n/cts setting order
- Set ncts_atomic_write & cts_manual
- Determine whether sample channel should set by desig_id.
- Delete hdmi_audio_config interface and modify audio clock control functions
- Remove audio_config & get_connect_status callback functions
  and add write/read/mod register callback functions
- Keep audio format config function in dw-hdmi-audio driver
  and remove audio_config & get_connect_status functions,
  move jack control to dw-hdmi-audio completely.
- Delete the operation of jack in rockchip-hdmi-audio driver,
  get ready to switch to simple-audio-card driver.
- modify cpu-of-node to i2s-controller

Changes in v2:
- Add irq control to suspend/resume interfaces
- Add suspend/resume support for dw_hdmi_rockchip driver
- add more n/cts combinations for more display resolutions
- enable audio support for No-CEA display mode
- Add audio sample channel status setting
- Add audio config interfaces to dw_hdmi driver
- Update the audio control interfaces
- Update dw_hdmi audio control interfaces, and adjust jack report process
- give "codec-name" & "codec-dai-name" an const name
- remove codec-name and codec-dai-name
- rename rockchip,rockchip-hdmi-audio.txt to rockchip,rockchip-dw-hdmi-audio.txt

Yakir Yang (15):
  drm: bridge/dw_hdmi: add irq control to suspend/resume
  drm: bridge/dw_hdmi: wrap irq control in fucntions
  drm: rockchip/dw_hdmi_rockchip: add resume/suspend support
  drm: bridge/dw_hdmi: add indentification registers parse and record
  drm: bridge/dw_hdmi: combine hdmi_set_clock_regenerator_n() and
    hdmi_regenerate_cts()
  drm: bridge/dw_hdmi: adjust n/cts setting order
  drm: bridge/dw_hdmi: set ncts_atomic_write & cts_manual
  drm: bridge/dw_hdmi: add audio support for more display resolutions
  drm: bridge/dw_hdmi: enable audio support for No-CEA display
    resolutions
  drm: bridge/dw_hdmi: add audio sample channel status setting
  drm: bridge/dw_hdmi: add audio clock control interfaces
  drm: bridge/dw_hdmi: creat dw-hdmi-audio platform device
  ASoC: dw-hdmi-audio: add codec driver for dw hdmi audio
  ASoC: rockchip-hdmi-audio: add sound driver for hdmi audio
  dt-bindings: Add documentation for Rockchip dw-hdmi-audio

 .../sound/rockchip,rockchip-dw-hdmi-audio.txt      |  12 +
 drivers/gpu/drm/bridge/dw_hdmi.c                   | 361 ++++++++++++++++++---
 drivers/gpu/drm/bridge/dw_hdmi.h                   |  49 +++
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c        |  16 +
 include/drm/bridge/dw_hdmi.h                       |  17 +
 sound/soc/codecs/Kconfig                           |   4 +
 sound/soc/codecs/Makefile                          |   2 +
 sound/soc/codecs/dw-hdmi-audio.c                   | 333 +++++++++++++++++++
 sound/soc/codecs/dw-hdmi-audio.h                   |  79 +++++
 sound/soc/rockchip/Kconfig                         |   9 +
 sound/soc/rockchip/Makefile                        |   2 +
 sound/soc/rockchip/rockchip_hdmi_audio.c           | 168 ++++++++++
 12 files changed, 1013 insertions(+), 39 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/rockchip,rockchip-dw-hdmi-audio.txt
 create mode 100644 sound/soc/codecs/dw-hdmi-audio.c
 create mode 100644 sound/soc/codecs/dw-hdmi-audio.h
 create mode 100644 sound/soc/rockchip/rockchip_hdmi_audio.c

-- 
2.1.2


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists