lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20150203231217.056416971@linuxfoundation.org>
Date:	Tue,  3 Feb 2015 15:14:25 -0800
From:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:	linux-kernel@...r.kernel.org
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	stable@...r.kernel.org,
	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>,
	Ludovic Desroches <ludovic.desroches@...el.com>,
	Nicolas Ferre <nicolas.ferre@...el.com>,
	Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH 3.18 34/57] pinctrl: at91: allow to have disabled gpio bank

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>

commit a0b957f306fa4d0a39f4ffe5e5e25e856e6be46e upstream.

Today we expect that all the bank are enabled, and count the number of banks
used by the pinctrl based on it instead of using the last bank id enabled.

So switch to it, set the chained IRQ at runtime based on enabled banks
and wait only the number of enabled gpio controllers at probe time.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@...el.com>
Acked-by: Nicolas Ferre <nicolas.ferre@...el.com>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/pinctrl/pinctrl-at91.c |  108 ++++++++++++++++++++---------------------
 1 file changed, 55 insertions(+), 53 deletions(-)

--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -179,7 +179,7 @@ struct at91_pinctrl {
 	struct device		*dev;
 	struct pinctrl_dev	*pctl;
 
-	int			nbanks;
+	int			nactive_banks;
 
 	uint32_t		*mux_mask;
 	int			nmux;
@@ -655,12 +655,18 @@ static int pin_check_config(struct at91_
 	int mux;
 
 	/* check if it's a valid config */
-	if (pin->bank >= info->nbanks) {
+	if (pin->bank >= gpio_banks) {
 		dev_err(info->dev, "%s: pin conf %d bank_id %d >= nbanks %d\n",
-			name, index, pin->bank, info->nbanks);
+			name, index, pin->bank, gpio_banks);
 		return -EINVAL;
 	}
 
+	if (!gpio_chips[pin->bank]) {
+		dev_err(info->dev, "%s: pin conf %d bank_id %d not enabled\n",
+			name, index, pin->bank);
+		return -ENXIO;
+	}
+
 	if (pin->pin >= MAX_NB_GPIO_PER_BANK) {
 		dev_err(info->dev, "%s: pin conf %d pin_bank_id %d >= %d\n",
 			name, index, pin->pin, MAX_NB_GPIO_PER_BANK);
@@ -983,7 +989,8 @@ static void at91_pinctrl_child_count(str
 
 	for_each_child_of_node(np, child) {
 		if (of_device_is_compatible(child, gpio_compat)) {
-			info->nbanks++;
+			if (of_device_is_available(child))
+				info->nactive_banks++;
 		} else {
 			info->nfunctions++;
 			info->ngroups += of_get_child_count(child);
@@ -1005,11 +1012,11 @@ static int at91_pinctrl_mux_mask(struct
 	}
 
 	size /= sizeof(*list);
-	if (!size || size % info->nbanks) {
-		dev_err(info->dev, "wrong mux mask array should be by %d\n", info->nbanks);
+	if (!size || size % gpio_banks) {
+		dev_err(info->dev, "wrong mux mask array should be by %d\n", gpio_banks);
 		return -EINVAL;
 	}
-	info->nmux = size / info->nbanks;
+	info->nmux = size / gpio_banks;
 
 	info->mux_mask = devm_kzalloc(info->dev, sizeof(u32) * size, GFP_KERNEL);
 	if (!info->mux_mask) {
@@ -1133,7 +1140,7 @@ static int at91_pinctrl_probe_dt(struct
 		of_match_device(at91_pinctrl_of_match, &pdev->dev)->data;
 	at91_pinctrl_child_count(info, np);
 
-	if (info->nbanks < 1) {
+	if (gpio_banks < 1) {
 		dev_err(&pdev->dev, "you need to specify at least one gpio-controller\n");
 		return -EINVAL;
 	}
@@ -1146,7 +1153,7 @@ static int at91_pinctrl_probe_dt(struct
 
 	dev_dbg(&pdev->dev, "mux-mask\n");
 	tmp = info->mux_mask;
-	for (i = 0; i < info->nbanks; i++) {
+	for (i = 0; i < gpio_banks; i++) {
 		for (j = 0; j < info->nmux; j++, tmp++) {
 			dev_dbg(&pdev->dev, "%d:%d\t0x%x\n", i, j, tmp[0]);
 		}
@@ -1164,7 +1171,7 @@ static int at91_pinctrl_probe_dt(struct
 	if (!info->groups)
 		return -ENOMEM;
 
-	dev_dbg(&pdev->dev, "nbanks = %d\n", info->nbanks);
+	dev_dbg(&pdev->dev, "nbanks = %d\n", gpio_banks);
 	dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
 	dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups);
 
@@ -1187,7 +1194,7 @@ static int at91_pinctrl_probe(struct pla
 {
 	struct at91_pinctrl *info;
 	struct pinctrl_pin_desc *pdesc;
-	int ret, i, j, k;
+	int ret, i, j, k, ngpio_chips_enabled = 0;
 
 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (!info)
@@ -1202,23 +1209,27 @@ static int at91_pinctrl_probe(struct pla
 	 * to obtain references to the struct gpio_chip * for them, and we
 	 * need this to proceed.
 	 */
-	for (i = 0; i < info->nbanks; i++) {
-		if (!gpio_chips[i]) {
-			dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i);
-			devm_kfree(&pdev->dev, info);
-			return -EPROBE_DEFER;
-		}
+	for (i = 0; i < gpio_banks; i++)
+		if (gpio_chips[i])
+			ngpio_chips_enabled++;
+
+	if (ngpio_chips_enabled < info->nactive_banks) {
+		dev_warn(&pdev->dev,
+			 "All GPIO chips are not registered yet (%d/%d)\n",
+			 ngpio_chips_enabled, info->nactive_banks);
+		devm_kfree(&pdev->dev, info);
+		return -EPROBE_DEFER;
 	}
 
 	at91_pinctrl_desc.name = dev_name(&pdev->dev);
-	at91_pinctrl_desc.npins = info->nbanks * MAX_NB_GPIO_PER_BANK;
+	at91_pinctrl_desc.npins = gpio_banks * MAX_NB_GPIO_PER_BANK;
 	at91_pinctrl_desc.pins = pdesc =
 		devm_kzalloc(&pdev->dev, sizeof(*pdesc) * at91_pinctrl_desc.npins, GFP_KERNEL);
 
 	if (!at91_pinctrl_desc.pins)
 		return -ENOMEM;
 
-	for (i = 0 , k = 0; i < info->nbanks; i++) {
+	for (i = 0, k = 0; i < gpio_banks; i++) {
 		for (j = 0; j < MAX_NB_GPIO_PER_BANK; j++, k++) {
 			pdesc->number = k;
 			pdesc->name = kasprintf(GFP_KERNEL, "pio%c%d", i + 'A', j);
@@ -1236,8 +1247,9 @@ static int at91_pinctrl_probe(struct pla
 	}
 
 	/* We will handle a range of GPIO pins */
-	for (i = 0; i < info->nbanks; i++)
-		pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range);
+	for (i = 0; i < gpio_banks; i++)
+		if (gpio_chips[i])
+			pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range);
 
 	dev_info(&pdev->dev, "initialized AT91 pinctrl driver\n");
 
@@ -1614,9 +1626,10 @@ static void gpio_irq_handler(unsigned ir
 static int at91_gpio_of_irq_setup(struct platform_device *pdev,
 				  struct at91_gpio_chip *at91_gpio)
 {
+	struct gpio_chip	*gpiochip_prev = NULL;
 	struct at91_gpio_chip   *prev = NULL;
 	struct irq_data		*d = irq_get_irq_data(at91_gpio->pioc_virq);
-	int ret;
+	int ret, i;
 
 	at91_gpio->pioc_hwirq = irqd_to_hwirq(d);
 
@@ -1642,24 +1655,33 @@ static int at91_gpio_of_irq_setup(struct
 		return ret;
 	}
 
-	/* Setup chained handler */
-	if (at91_gpio->pioc_idx)
-		prev = gpio_chips[at91_gpio->pioc_idx - 1];
-
 	/* The top level handler handles one bank of GPIOs, except
 	 * on some SoC it can handle up to three...
 	 * We only set up the handler for the first of the list.
 	 */
-	if (prev && prev->next == at91_gpio)
+	gpiochip_prev = irq_get_handler_data(at91_gpio->pioc_virq);
+	if (!gpiochip_prev) {
+		/* Then register the chain on the parent IRQ */
+		gpiochip_set_chained_irqchip(&at91_gpio->chip,
+					     &gpio_irqchip,
+					     at91_gpio->pioc_virq,
+					     gpio_irq_handler);
 		return 0;
+	}
 
-	/* Then register the chain on the parent IRQ */
-	gpiochip_set_chained_irqchip(&at91_gpio->chip,
-				     &gpio_irqchip,
-				     at91_gpio->pioc_virq,
-				     gpio_irq_handler);
+	prev = container_of(gpiochip_prev, struct at91_gpio_chip, chip);
 
-	return 0;
+	/* we can only have 2 banks before */
+	for (i = 0; i < 2; i++) {
+		if (prev->next) {
+			prev = prev->next;
+		} else {
+			prev->next = at91_gpio;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
 }
 
 /* This structure is replicated for each GPIO block allocated at probe time */
@@ -1676,24 +1698,6 @@ static struct gpio_chip at91_gpio_templa
 	.ngpio			= MAX_NB_GPIO_PER_BANK,
 };
 
-static void at91_gpio_probe_fixup(void)
-{
-	unsigned i;
-	struct at91_gpio_chip *at91_gpio, *last = NULL;
-
-	for (i = 0; i < gpio_banks; i++) {
-		at91_gpio = gpio_chips[i];
-
-		/*
-		 * GPIO controller are grouped on some SoC:
-		 * PIOC, PIOD and PIOE can share the same IRQ line
-		 */
-		if (last && last->pioc_virq == at91_gpio->pioc_virq)
-			last->next = at91_gpio;
-		last = at91_gpio;
-	}
-}
-
 static struct of_device_id at91_gpio_of_match[] = {
 	{ .compatible = "atmel,at91sam9x5-gpio", .data = &at91sam9x5_ops, },
 	{ .compatible = "atmel,at91rm9200-gpio", .data = &at91rm9200_ops },
@@ -1806,8 +1810,6 @@ static int at91_gpio_probe(struct platfo
 	gpio_chips[alias_idx] = at91_chip;
 	gpio_banks = max(gpio_banks, alias_idx + 1);
 
-	at91_gpio_probe_fixup();
-
 	ret = at91_gpio_of_irq_setup(pdev, at91_chip);
 	if (ret)
 		goto irq_setup_err;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ