| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1423025771-4139-6-git-send-email-jaewon02.kim@samsung.com>
Date: Wed, 04 Feb 2015 13:56:10 +0900
From: Jaewon Kim <jaewon02.kim@...sung.com>
To: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-pm@...r.kernel.org
Cc: Inki Dae <inki.dae@...sung.com>,
SangBae Lee <sangbae90.lee@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Lee Jones <lee.jones@...aro.org>,
Chanwoo Choi <cw00.choi@...sung.com>,
Sebastian Reichel <sre@...nel.org>,
Mark Brown <broonie@...nel.org>,
Beomho Seo <beomho.seo@...sung.com>,
Jaewon Kim <jaewon02.kim@...sung.com>
Subject: [PATCH v3 5/6] regulator: max77843: Add max77843 regulator driver
This patch adds new regulator driver to support max77843
MFD(Multi Function Device) chip`s regulators.
The Max77843 has two voltage regulators for USB safeout.
Cc: Mark Brown <broonie@...nel.org>
Signed-off-by: Jaewon Kim <jaewon02.kim@...sung.com>
Signed-off-by: Beomho Seo <beomho.seo@...sung.com>
---
drivers/regulator/Kconfig | 8 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/max77843.c | 227 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 236 insertions(+)
create mode 100644 drivers/regulator/max77843.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c3a60b5..c1f9c33 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -414,6 +414,14 @@ config REGULATOR_MAX77802
Exynos5420/Exynos5800 SoCs to control various voltages.
It includes support for control of voltage and ramp speed.
+config REGULATOR_MAX77843
+ tristate "Maxim 77843 regulator"
+ depends on MFD_MAX77843
+ help
+ This driver controls a Maxim 77843 regulator.
+ The regulator include two 'SAFEOUT' for USB(Universal Serial Bus)
+ This is suitable for Exynos5433 SoC chips.
+
config REGULATOR_MC13XXX_CORE
tristate
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 1f28ebf..12408d6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
+obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
diff --git a/drivers/regulator/max77843.c b/drivers/regulator/max77843.c
new file mode 100644
index 0000000..779449f
--- /dev/null
+++ b/drivers/regulator/max77843.c
@@ -0,0 +1,227 @@
+/*
+ * max77843.c - Regulator driver for the Maxim MAX77843
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@...sung.com>
+ * Author: Beomho Seo <beomho.seo@...sung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/regulator/of_regulator.h>
+
+enum max77843_regulator_type {
+ MAX77843_SAFEOUT1 = 0,
+ MAX77843_SAFEOUT2,
+ MAX77843_CHARGER,
+
+ MAX77843_NUM,
+};
+
+static const unsigned int max77843_safeout_voltage_table[] = {
+ 4850000,
+ 4900000,
+ 4950000,
+ 3300000,
+};
+
+static int max77843_reg_is_enabled(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev->regmap;
+ int ret;
+ unsigned int reg;
+
+ ret = regmap_read(regmap, rdev->desc->enable_reg, ®);
+ if (ret) {
+ dev_err(&rdev->dev, "Fialed to read charger register\n");
+ return ret;
+ }
+
+ return (reg & rdev->desc->enable_mask) == rdev->desc->enable_mask;
+}
+
+static int max77843_reg_get_current_limit(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev->regmap;
+ unsigned int chg_min_uA = rdev->constraints->min_uA;
+ unsigned int chg_max_uA = rdev->constraints->max_uA;
+ unsigned int val;
+ int ret;
+ unsigned int reg, sel;
+
+ ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_02, ®);
+ if (ret) {
+ dev_err(&rdev->dev, "Failed to read charger register\n");
+ return ret;
+ }
+
+ sel = reg & MAX77843_CHG_FAST_CHG_CURRENT_MASK;
+
+ if (sel < 0x03)
+ sel = 0;
+ else
+ sel -= 2;
+
+ val = chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel;
+ if (val > chg_max_uA)
+ return -EINVAL;
+
+ return val;
+}
+
+static int max77843_reg_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct regmap *regmap = rdev->regmap;
+ unsigned int chg_min_uA = rdev->constraints->min_uA;
+ int sel = 0;
+
+ while (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel < min_uA)
+ sel++;
+
+ if (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel > max_uA)
+ return -EINVAL;
+
+ sel += 2;
+
+ return regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_02, sel);
+}
+
+static struct regulator_ops max77843_charger_ops = {
+ .is_enabled = max77843_reg_is_enabled,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_current_limit = max77843_reg_get_current_limit,
+ .set_current_limit = max77843_reg_set_current_limit,
+};
+
+static struct regulator_ops max77843_regulator_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc max77843_supported_regulators[] = {
+ [MAX77843_SAFEOUT1] = {
+ .name = "SAFEOUT1",
+ .id = MAX77843_SAFEOUT1,
+ .ops = &max77843_regulator_ops,
+ .of_match = of_match_ptr("SAFEOUT1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table),
+ .volt_table = max77843_regulator_table,
+ .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1,
+ .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK,
+ },
+ [MAX77843_SAFEOUT2] = {
+ .name = "SAFEOUT2",
+ .id = MAX77843_SAFEOUT2,
+ .ops = &max77843_regulator_ops,
+ .of_match = of_match_ptr("SAFEOUT2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(max77843_safeout_voltage_table),
+ .volt_table = max77843_regulator_table,
+ .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2,
+ .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL,
+ .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK,
+ },
+ [MAX77843_CHARGER] = {
+ .name = "CHARGER",
+ .id = MAX77843_CHARGER,
+ .ops = &max77843_charger_ops,
+ .of_match = of_match_ptr("CHARGER"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_CURRENT,
+ .owner = THIS_MODULE,
+ .enable_reg = MAX77843_CHG_REG_CHG_CNFG_00,
+ .enable_mask = MAX77843_CHG_MASK,
+ },
+};
+
+static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id)
+{
+ switch (reg_id) {
+ case MAX77843_SAFEOUT1:
+ case MAX77843_SAFEOUT2:
+ return max77843->regmap;
+ case MAX77843_CHARGER:
+ return max77843->regmap_chg;
+ default:
+ return max77843->regmap;
+ }
+}
+
+static int max77843_regulator_probe(struct platform_device *pdev)
+{
+ struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config config = {};
+ int i;
+
+ config.dev = max77843->dev;
+ config.driver_data = max77843;
+
+ for (i = 0; i < ARRAY_SIZE(max77843_supported_regulators); i++) {
+ struct regulator_dev *regulator;
+
+ config.regmap = max77843_get_regmap(max77843,
+ max77843_supported_regulators[i].id);
+
+ regulator = devm_regulator_register(&pdev->dev,
+ &max77843_supported_regulators[i], &config);
+ if (IS_ERR(regulator)) {
+ dev_err(&pdev->dev,
+ "Failed to regiser regulator-%d\n", i);
+ return PTR_ERR(regulator);
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id max77843_regulator_id[] = {
+ { "max77843-regulator", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver max77843_regulator_driver = {
+ .driver = {
+ .name = "max77843-regulator",
+ },
+ .probe = max77843_regulator_probe,
+ .id_table = max77843_regulator_id,
+};
+
+static int __init max77843_regulator_init(void)
+{
+ return platform_driver_register(&max77843_regulator_driver);
+}
+subsys_initcall(max77843_regulator_init);
+
+static void __exit max77843_regulator_exit(void)
+{
+ platform_driver_unregister(&max77843_regulator_driver);
+}
+module_exit(max77843_regulator_exit);
+
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@...sung.com>");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@...sung.com>");
+MODULE_DESCRIPTION("Maxim MAX77843 regulator driver");
+MODULE_LICENSE("GPL");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists