[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1423063323-19419-18-git-send-email-Zubair.Kakakhel@imgtec.com>
Date: Wed, 4 Feb 2015 15:21:46 +0000
From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@...tec.com>
To: <linux-mips@...ux-mips.org>
CC: <devicetree@...r.kernel.org>, <linux-serial@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <Zubair.Kakakhel@...tec.com>,
<gregkh@...uxfoundation.org>, <mturquette@...aro.org>,
<sboyd@...eaurora.org>, <ralf@...ux-mips.org>, <jslaby@...e.cz>,
<tglx@...utronix.de>, <jason@...edaemon.net>, <lars@...afoo.de>,
<paul.burton@...tec.com>
Subject: [PATCH_V2 17/34] MIPS: clk: move jz4740_clock_set_wait_mode to jz4740-cgu
From: Paul Burton <paul.burton@...tec.com>
The jz4740-cgu driver already has access to the CGU, so it makes sense
to move the few remaining accesses to the CGU from arch/mips/jz4740
there too. Move jz4740_clock_set_wait_mode for such consistency.
Signed-off-by: Paul Burton <paul.burton@...tec.com>
Cc: Lars-Peter Clausen <lars@...afoo.de>
Cc: Mike Turquette <mturquette@...aro.org>
---
arch/mips/jz4740/clock.c | 16 ----------------
drivers/clk/jz47xx/jz4740-cgu.c | 22 ++++++++++++++++++++++
2 files changed, 22 insertions(+), 16 deletions(-)
diff --git a/arch/mips/jz4740/clock.c b/arch/mips/jz4740/clock.c
index dedee7c..90b44d7 100644
--- a/arch/mips/jz4740/clock.c
+++ b/arch/mips/jz4740/clock.c
@@ -28,7 +28,6 @@
#include "clock.h"
-#define JZ_REG_CLOCK_LOW_POWER 0x04
#define JZ_REG_CLOCK_PLL 0x10
#define JZ_REG_CLOCK_GATE 0x20
@@ -40,9 +39,6 @@
#define JZ_CLOCK_PLL_STABLE BIT(10)
#define JZ_CLOCK_PLL_ENABLED BIT(8)
-#define JZ_CLOCK_LOW_POWER_MODE_DOZE BIT(2)
-#define JZ_CLOCK_LOW_POWER_MODE_SLEEP BIT(0)
-
static void __iomem *jz_clock_base;
static uint32_t jz_clk_reg_read(int reg)
@@ -68,18 +64,6 @@ static void jz_clk_reg_clear_bits(int reg, uint32_t mask)
writel(val, jz_clock_base + reg);
}
-void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode)
-{
- switch (mode) {
- case JZ4740_WAIT_MODE_IDLE:
- jz_clk_reg_clear_bits(JZ_REG_CLOCK_LOW_POWER, JZ_CLOCK_LOW_POWER_MODE_SLEEP);
- break;
- case JZ4740_WAIT_MODE_SLEEP:
- jz_clk_reg_set_bits(JZ_REG_CLOCK_LOW_POWER, JZ_CLOCK_LOW_POWER_MODE_SLEEP);
- break;
- }
-}
-
void jz4740_clock_udc_disable_auto_suspend(void)
{
jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE, JZ_CLOCK_GATE_UDC);
diff --git a/drivers/clk/jz47xx/jz4740-cgu.c b/drivers/clk/jz47xx/jz4740-cgu.c
index 83f1e1f..ef559e7 100644
--- a/drivers/clk/jz47xx/jz4740-cgu.c
+++ b/drivers/clk/jz47xx/jz4740-cgu.c
@@ -20,10 +20,12 @@
#include <linux/delay.h>
#include <linux/of.h>
#include <dt-bindings/clock/jz4740-cgu.h>
+#include <asm/mach-jz4740/clock.h>
#include "jz47xx-cgu.h"
/* CGU register offsets */
#define CGU_REG_CPCCR 0x00
+#define CGU_REG_LCR 0x04
#define CGU_REG_CPPCR 0x10
#define CGU_REG_I2SCDR 0x60
#define CGU_REG_LPCDR 0x64
@@ -42,6 +44,9 @@
#define PLLCTL_BYPASS (1 << 9)
#define PLLCTL_ENABLE (1 << 8)
+/* bits within the LCR register */
+#define LCR_SLEEP (1 << 0)
+
static struct jz47xx_cgu *cgu;
static const s8 pll_od_encoding[4] = {
@@ -217,3 +222,20 @@ static void __init jz4740_cgu_init(struct device_node *np)
pr_err("%s: failed to register CGU Clocks\n", __func__);
}
CLK_OF_DECLARE(jz4740_cgu, "ingenic,jz4740-cgu", jz4740_cgu_init);
+
+void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode)
+{
+ uint32_t lcr = readl(cgu->base + CGU_REG_LCR);
+
+ switch (mode) {
+ case JZ4740_WAIT_MODE_IDLE:
+ lcr &= ~LCR_SLEEP;
+ break;
+
+ case JZ4740_WAIT_MODE_SLEEP:
+ lcr |= LCR_SLEEP;
+ break;
+ }
+
+ writel(lcr, cgu->base + CGU_REG_LCR);
+}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists