[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1423097705-22939-1-git-send-email-rjui@broadcom.com>
Date: Wed, 4 Feb 2015 16:54:59 -0800
From: Ray Jui <rjui@...adcom.com>
To: Mike Turquette <mturquette@...aro.org>,
Stephen Boyd <sboyd@...eaurora.org>,
Matt Porter <mporter@...aro.org>,
Alex Elder <elder@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Russell King <linux@....linux.org.uk>,
Arnd Bergmann <arnd@...db.de>
CC: <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>,
Scott Branden <sbranden@...adcom.com>,
Dmitry Torokhov <dtor@...gle.com>,
Anatol Pomazau <anatol@...gle.com>,
<linux-kernel@...r.kernel.org>,
<bcm-kernel-feedback-list@...adcom.com>,
Ray Jui <rjui@...adcom.com>
Subject: [PATCH v5 0/6] Add common clock support for Broadcom iProc architecture
This patchset contains the initial common clock support for Broadcom's iProc
family of SoCs. The iProc clock architecture comprises of various PLLs, e.g.,
ARMPLL, GENPLL, LCPLL0, MIPIPLL, and etc. An onboard crystal serves as the
basic reference clock for these PLLs. Each PLL may have several leaf clocks.
One special group of clocks is the ASIU clocks, which are dervied directly
from the crystal reference clock.
This patchset also contains the basic clock support for the Broadcom Cygnus
SoC, which implements the iProc clock architecture
Changes from v4:
- Add of_clk_get_parent_rate helper function into the clock framework
- Switch to use of_clk_get_parent_rate in the iProc PLL clock driver
Changes from v3:
- Fix incorrect use of passing in of_clk_src_onecell_get when adding ARM PLL
and other iProc PLLs as clock provider. These PLLs have zero cells in DT and
thefore of_clk_src_simple_get should be used instead
- Rename Cygnus MIPI PLL Channel 2 clock from BCM_CYGNUS_MIPIPLL_CH2_UNUSED
to BCM_CYGNUS_MIPIPLL_CH2_V3D, since a 3D graphic rendering engine has been
integrated into Cygnus revision B0 and has its core clock running off
MIPI PLL Channel 2
- Changed default MIPI PLL VCO frequency from 1.75 GHz to 2.1 GHz. This allows
us to derive 300 MHz V3D clock from channel 2 through the post divisor
Changes from v2:
- Re-arrange Cygnus clock/pll init functions so each init function is right
next to its clock table
- Removed #defines for number of clocks in Cygnus. Have the number of clocks
automatically determined based on array size of the clock table
Changes from v1:
- Separate drivers/clk/Makefile change for drivers/clk/bcm out to a standalone patch
Ray Jui (6):
clk: add of_clk_get_parent_rate function
clk: iproc: define Broadcom iProc clock binding
clk: iproc: add initial common clock support
clk: Change bcm clocks build dependency
clk: cygnus: add clock support for Broadcom Cygnus
ARM: dts: enable clock support for Broadcom Cygnus
arch/arm/boot/dts/bcm-cygnus-clock.dtsi | 110 ++++++--
arch/arm/boot/dts/bcm-cygnus.dtsi | 2 +-
brcm,iproc-clocks.txt | 178 ++++++++++++
drivers/clk/Makefile | 2 +-
drivers/clk/bcm/Kconfig | 9 +
drivers/clk/bcm/Makefile | 2 +
drivers/clk/bcm/clk-cygnus.c | 277 +++++++++++++++++++
drivers/clk/bcm/clk-iproc-armpll.c | 282 +++++++++++++++++++
drivers/clk/bcm/clk-iproc-asiu.c | 275 ++++++++++++++++++
drivers/clk/bcm/clk-iproc-clk.c | 238 ++++++++++++++++
drivers/clk/bcm/clk-iproc-pll.c | 461 +++++++++++++++++++++++++++++++
drivers/clk/bcm/clk-iproc.h | 157 +++++++++++
drivers/clk/clk.c | 17 ++
include/dt-bindings/clock/bcm-cygnus.h | 65 +++++
include/linux/clk-provider.h | 6 +-
15 files changed, 2053 insertions(+), 28 deletions(-)
create mode 100644 brcm,iproc-clocks.txt
create mode 100644 drivers/clk/bcm/clk-cygnus.c
create mode 100644 drivers/clk/bcm/clk-iproc-armpll.c
create mode 100644 drivers/clk/bcm/clk-iproc-asiu.c
create mode 100644 drivers/clk/bcm/clk-iproc-clk.c
create mode 100644 drivers/clk/bcm/clk-iproc-pll.c
create mode 100644 drivers/clk/bcm/clk-iproc.h
create mode 100644 include/dt-bindings/clock/bcm-cygnus.h
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists