| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 5 Feb 2015 11:11:28 +0100
From: Geert Uytterhoeven <geert+renesas@...der.be>
To: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Grant Likely <grant.likely@...aro.org>,
Arnd Bergmann <arnd@...db.de>,
Kevin Hilman <khilman@...nel.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Felipe Balbi <balbi@...com>
Cc: Olof Johansson <olof@...om.net>,
Simon Horman <horms+renesas@...ge.net.au>,
Magnus Damm <magnus.damm@...il.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
devicetree@...r.kernel.org, linux-sh@...r.kernel.org,
linux-pm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Geert Uytterhoeven <geert+renesas@...der.be>
Subject: [PATCH v5 5/5] drivers: bus: Add Simple Power-Managed Bus Driver
Add a driver for transparent busses that don't need a real driver, but
where the bus controller is part of a PM domain, or under the control of
a functional clock. Typically, the bus controller's PM domain and/or
clock must be enabled for child devices connected to the bus (either
on-SoC or externally) to function.
Hence the sole purpose of this driver is to enable its clock and PM
domain (if exist(s)), which are specified in the DT and managed from
platform and PM domain code, and to probe for child devices.
Due to the child-parent relationship with devices connected to the bus,
PM domain and clock state transitions are handled in the correct order.
Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
Tested-by: Ulrich Hecht <ulrich.hecht+renesas@...il.com>
Reviewed-by: Kevin Hilman <khilman@...aro.org>
---
v5:
- Add Reviewed-by,
v4:
- Bind against the generic "simple-pm-bus" instead of "renesas,bsc",
- Explicitly call of_platform_populate() after pm_runtime_enable() to
enforce ordering, instead of depending on claimed compatibility with
"simple-bus",
v3:
- Add Tested-by,
v2:
- Rename from "Renesas Bus State Controller Driver" (renesas-bsc) to
"Simple Power-Managed Bus Driver" (simple-pm-bus),
- Change module license to GPL v2,
- Change email address to geert+renesas@...der.be.
---
drivers/bus/Kconfig | 13 ++++++++++
drivers/bus/Makefile | 1 +
drivers/bus/simple-pm-bus.c | 58 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 72 insertions(+)
create mode 100644 drivers/bus/simple-pm-bus.c
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 626960819e6df16c..7e9c2674af81d6e9 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -58,6 +58,19 @@ config OMAP_OCP2SCP
OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
OCP2SCP.
+config SIMPLE_PM_BUS
+ bool "Simple Power-Managed Bus Driver"
+ depends on OF && PM
+ depends on ARCH_SHMOBILE || COMPILE_TEST
+ help
+ Driver for transparent busses that don't need a real driver, but
+ where the bus controller is part of a PM domain, or under the control
+ of a functional clock, and thus relies on runtime PM for managing
+ this PM domain and/or clock.
+ An example of such a bus controller is the Renesas Bus State
+ Controller (BSC, sometimes called "LBSC within Bus Bridge", or
+ "External Bus Interface") as found on several Renesas ARM SoCs.
+
config VEXPRESS_CONFIG
bool "Versatile Express configuration bus"
default y if ARCH_VEXPRESS
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 3cfaf2c7f25ac4f0..e023a2bec664d900 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -14,4 +14,5 @@ obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
+obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
diff --git a/drivers/bus/simple-pm-bus.c b/drivers/bus/simple-pm-bus.c
new file mode 100644
index 0000000000000000..c5eb46cbf388b507
--- /dev/null
+++ b/drivers/bus/simple-pm-bus.c
@@ -0,0 +1,58 @@
+/*
+ * Simple Power-Managed Bus Driver
+ *
+ * Copyright (C) 2014-2015 Glider bvba
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+
+static int simple_pm_bus_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ pm_runtime_enable(&pdev->dev);
+
+ if (np)
+ of_platform_populate(np, NULL, NULL, &pdev->dev);
+
+ return 0;
+}
+
+static int simple_pm_bus_remove(struct platform_device *pdev)
+{
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ pm_runtime_disable(&pdev->dev);
+ return 0;
+}
+
+static const struct of_device_id simple_pm_bus_of_match[] = {
+ { .compatible = "simple-pm-bus", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, simple_pm_bus_of_match);
+
+static struct platform_driver simple_pm_bus_driver = {
+ .probe = simple_pm_bus_probe,
+ .remove = simple_pm_bus_remove,
+ .driver = {
+ .name = "simple-pm-bus",
+ .of_match_table = simple_pm_bus_of_match,
+ },
+};
+
+module_platform_driver(simple_pm_bus_driver);
+
+MODULE_DESCRIPTION("Simple Power-Managed Bus Driver");
+MODULE_AUTHOR("Geert Uytterhoeven <geert+renesas@...der.be>");
+MODULE_LICENSE("GPL v2");
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists