| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150205211916.GA31367@altlinux.org>
Date: Fri, 6 Feb 2015 00:19:16 +0300
From: "Dmitry V. Levin" <ldv@...linux.org>
To: Andy Lutomirski <luto@...capital.net>
Cc: linux-kernel@...r.kernel.org, Kees Cook <keescook@...omium.org>,
Will Drewry <wad@...omium.org>,
Oleg Nesterov <oleg@...hat.com>, x86@...nel.org,
linux-arm-kernel@...ts.infradead.org, linux-mips@...ux-mips.org,
linux-arch@...r.kernel.org, linux-security-module@...r.kernel.org,
Alexei Starovoitov <ast@...mgrid.com>, hpa@...or.com,
Frederic Weisbecker <fweisbec@...il.com>
Subject: Re: [PATCH v5 3/5] x86: Split syscall_trace_enter into two phases
Hi,
On Fri, Sep 05, 2014 at 03:13:54PM -0700, Andy Lutomirski wrote:
> This splits syscall_trace_enter into syscall_trace_enter_phase1 and
> syscall_trace_enter_phase2. Only phase 2 has full pt_regs, and only
> phase 2 is permitted to modify any of pt_regs except for orig_ax.
This breaks ptrace, see below.
> The intent is that phase 1 can be called from the syscall fast path.
>
> In this implementation, phase1 can handle any combination of
> TIF_NOHZ (RCU context tracking), TIF_SECCOMP, and TIF_SYSCALL_AUDIT,
> unless seccomp requests a ptrace event, in which case phase2 is
> forced.
>
> In principle, this could yield a big speedup for TIF_NOHZ as well as
> for TIF_SECCOMP if syscall exit work were similarly split up.
>
> Signed-off-by: Andy Lutomirski <luto@...capital.net>
> ---
> arch/x86/include/asm/ptrace.h | 5 ++
> arch/x86/kernel/ptrace.c | 157 +++++++++++++++++++++++++++++++++++-------
> 2 files changed, 138 insertions(+), 24 deletions(-)
>
> diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
> index 6205f0c434db..86fc2bb82287 100644
> --- a/arch/x86/include/asm/ptrace.h
> +++ b/arch/x86/include/asm/ptrace.h
> @@ -75,6 +75,11 @@ convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs);
> extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
> int error_code, int si_code);
>
> +
> +extern unsigned long syscall_trace_enter_phase1(struct pt_regs *, u32 arch);
> +extern long syscall_trace_enter_phase2(struct pt_regs *, u32 arch,
> + unsigned long phase1_result);
> +
> extern long syscall_trace_enter(struct pt_regs *);
> extern void syscall_trace_leave(struct pt_regs *);
>
> diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
> index bbf338a04a5d..29576c244699 100644
> --- a/arch/x86/kernel/ptrace.c
> +++ b/arch/x86/kernel/ptrace.c
> @@ -1441,20 +1441,126 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
> force_sig_info(SIGTRAP, &info, tsk);
> }
>
> +static void do_audit_syscall_entry(struct pt_regs *regs, u32 arch)
> +{
> +#ifdef CONFIG_X86_64
> + if (arch == AUDIT_ARCH_X86_64) {
> + audit_syscall_entry(arch, regs->orig_ax, regs->di,
> + regs->si, regs->dx, regs->r10);
> + } else
> +#endif
> + {
> + audit_syscall_entry(arch, regs->orig_ax, regs->bx,
> + regs->cx, regs->dx, regs->si);
> + }
> +}
> +
> /*
> - * We must return the syscall number to actually look up in the table.
> - * This can be -1L to skip running any syscall at all.
> + * We can return 0 to resume the syscall or anything else to go to phase
> + * 2. If we resume the syscall, we need to put something appropriate in
> + * regs->orig_ax.
> + *
> + * NB: We don't have full pt_regs here, but regs->orig_ax and regs->ax
> + * are fully functional.
> + *
> + * For phase 2's benefit, our return value is:
> + * 0: resume the syscall
> + * 1: go to phase 2; no seccomp phase 2 needed
> + * anything else: go to phase 2; pass return value to seccomp
> */
> -long syscall_trace_enter(struct pt_regs *regs)
> +unsigned long syscall_trace_enter_phase1(struct pt_regs *regs, u32 arch)
> {
> - long ret = 0;
> + unsigned long ret = 0;
> + u32 work;
> +
> + BUG_ON(regs != task_pt_regs(current));
> +
> + work = ACCESS_ONCE(current_thread_info()->flags) &
> + _TIF_WORK_SYSCALL_ENTRY;
>
> /*
> * If TIF_NOHZ is set, we are required to call user_exit() before
> * doing anything that could touch RCU.
> */
> - if (test_thread_flag(TIF_NOHZ))
> + if (work & _TIF_NOHZ) {
> user_exit();
> + work &= ~TIF_NOHZ;
> + }
> +
> +#ifdef CONFIG_SECCOMP
> + /*
> + * Do seccomp first -- it should minimize exposure of other
> + * code, and keeping seccomp fast is probably more valuable
> + * than the rest of this.
> + */
> + if (work & _TIF_SECCOMP) {
> + struct seccomp_data sd;
> +
> + sd.arch = arch;
> + sd.nr = regs->orig_ax;
> + sd.instruction_pointer = regs->ip;
> +#ifdef CONFIG_X86_64
> + if (arch == AUDIT_ARCH_X86_64) {
> + sd.args[0] = regs->di;
> + sd.args[1] = regs->si;
> + sd.args[2] = regs->dx;
> + sd.args[3] = regs->r10;
> + sd.args[4] = regs->r8;
> + sd.args[5] = regs->r9;
> + } else
> +#endif
> + {
> + sd.args[0] = regs->bx;
> + sd.args[1] = regs->cx;
> + sd.args[2] = regs->dx;
> + sd.args[3] = regs->si;
> + sd.args[4] = regs->di;
> + sd.args[5] = regs->bp;
> + }
> +
> + BUILD_BUG_ON(SECCOMP_PHASE1_OK != 0);
> + BUILD_BUG_ON(SECCOMP_PHASE1_SKIP != 1);
> +
> + ret = seccomp_phase1(&sd);
> + if (ret == SECCOMP_PHASE1_SKIP) {
> + regs->orig_ax = -1;
How the tracer is expected to get the correct syscall number after that?
--
ldv
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists