| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJxxZ0PHUW-EkX7Jw55_V1Y+nusHVX2hbYLPpYzWrEtmD=goeg@mail.gmail.com>
Date: Fri, 6 Feb 2015 17:22:49 +0800
From: Sonic Zhang <sonic.adi@...il.com>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc: Sonic Zhang <sonic.zhang@...log.com>, linux-input@...r.kernel.org,
Linux Kernel <linux-kernel@...r.kernel.org>
Subject: Re: [RFT/PATCH] Input: bfin_rotary - introduce open and close methods
Hi Dmitry,
On Fri, Feb 6, 2015 at 2:56 PM, Dmitry Torokhov
<dmitry.torokhov@...il.com> wrote:
> Introduce open and close methods for the input device to postpone enabling
> the device until it is needed.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
> ---
>
> Hi Sonic,
>
> Could you please tell me if the driver still works with this parch?
>
> Thanks!
>
> drivers/input/misc/bfin_rotary.c | 70 ++++++++++++++++++++++++----------------
> 1 file changed, 42 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c
> index 09d7612..1bc9409 100644
> --- a/drivers/input/misc/bfin_rotary.c
> +++ b/drivers/input/misc/bfin_rotary.c
> @@ -35,6 +35,10 @@ struct bfin_rot {
> unsigned int down_key;
> unsigned int button_key;
> unsigned int rel_code;
> +
> + unsigned short mode;
> + unsigned short debounce;
> +
> unsigned short cnt_config;
> unsigned short cnt_imask;
> unsigned short cnt_debounce;
> @@ -94,6 +98,35 @@ static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> +static int bfin_rotary_open(struct input_dev *input)
> +{
> + struct bfin_rot *rotary = input_get_drvdata(input);
> + unsigned short val;
> +
> + if (rotary->mode & ROT_DEBE)
> + writew(rotary->debounce & DPRESCALE,
> + rotary->base + CNT_DEBOUNCE_OFF);
> +
> + writew(rotary->mode & ~CNTE, rotary->base + CNT_CONFIG_OFF);
> +
> + val = UCIE | DCIE;
> + if (rotary->button_key)
> + val |= CZMIE;
> + writew(val, rotary->base + CNT_IMASK_OFF);
> +
> + writew(rotary->mode | CNTE, rotary->base + CNT_CONFIG_OFF);
> +
> + return 0;
> +}
> +
> +static void bfin_rotary_close(struct input_dev *input)
> +{
> + struct bfin_rot *rotary = input_get_drvdata(input);
> +
> + writew(0, rotary->base + CNT_CONFIG_OFF);
> + writew(0, rotary->base + CNT_IMASK_OFF);
> +}
> +
> static void bfin_rotary_free_action(void *data)
> {
> peripheral_free_list(data);
> @@ -154,6 +187,9 @@ static int bfin_rotary_probe(struct platform_device *pdev)
> rotary->button_key = pdata->rotary_button_key;
> rotary->rel_code = pdata->rotary_rel_code;
>
> + rotary->mode = pdata->mode;
> + rotary->debounce = pdata->debounce;
> +
> input->name = pdev->name;
> input->phys = "bfin-rotary/input0";
> input->dev.parent = &pdev->dev;
> @@ -165,6 +201,9 @@ static int bfin_rotary_probe(struct platform_device *pdev)
> input->id.product = 0x0001;
> input->id.version = 0x0100;
>
> + input->open = bfin_rotary_open;
> + input->close = bfin_rotary_close;
> +
> if (rotary->up_key) {
> __set_bit(EV_KEY, input->evbit);
> __set_bit(rotary->up_key, input->keybit);
> @@ -179,6 +218,9 @@ static int bfin_rotary_probe(struct platform_device *pdev)
> __set_bit(rotary->button_key, input->keybit);
> }
>
> + /* Quiesce the device before requesting irq */
> + bfin_rotary_close(input);
> +
> rotary->irq = platform_get_irq(pdev, 0);
> if (rotary->irq < 0) {
> dev_err(dev, "No rotary IRQ specified\n");
Could you generate the patch after applying patch "bfin_rotary:
convert to use managed resources"?
Your code base is different from mine. The above 3 lines doesn't exist
with the managed resources patch.
Thanks,
Sonic
> @@ -199,39 +241,12 @@ static int bfin_rotary_probe(struct platform_device *pdev)
> return error;
> }
>
> - if (pdata->rotary_button_key)
> - writew(CZMIE, rotary->base + CNT_IMASK_OFF);
> -
> - if (pdata->mode & ROT_DEBE)
> - writew(pdata->debounce & DPRESCALE,
> - rotary->base + CNT_DEBOUNCE_OFF);
> -
> - if (pdata->mode)
> - writew(readw(rotary->base + CNT_CONFIG_OFF) |
> - (pdata->mode & ~CNTE),
> - rotary->base + CNT_CONFIG_OFF);
> -
> - writew(readw(rotary->base + CNT_IMASK_OFF) | UCIE | DCIE,
> - rotary->base + CNT_IMASK_OFF);
> - writew(readw(rotary->base + CNT_CONFIG_OFF) | CNTE,
> - rotary->base + CNT_CONFIG_OFF);
> -
> platform_set_drvdata(pdev, rotary);
> device_init_wakeup(&pdev->dev, 1);
>
> return 0;
> }
>
> -static int bfin_rotary_remove(struct platform_device *pdev)
> -{
> - struct bfin_rot *rotary = platform_get_drvdata(pdev);
> -
> - writew(0, rotary->base + CNT_CONFIG_OFF);
> - writew(0, rotary->base + CNT_IMASK_OFF);
> -
> - return 0;
> -}
> -
> static int __maybe_unused bfin_rotary_suspend(struct device *dev)
> {
> struct platform_device *pdev = to_platform_device(dev);
> @@ -270,7 +285,6 @@ static SIMPLE_DEV_PM_OPS(bfin_rotary_pm_ops,
>
> static struct platform_driver bfin_rotary_device_driver = {
> .probe = bfin_rotary_probe,
> - .remove = bfin_rotary_remove,
> .driver = {
> .name = "bfin-rotary",
> .pm = &bfin_rotary_pm_ops,
> --
> 2.2.0.rc0.207.ga3a616c
>
>
> --
> Dmitry
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists