linux-kernel - Re: [PATCH v4 0/5] ARM: sun9i: Add USB host controller support for A80

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20150207154409.GS2079@lukather>
Date:	Sat, 7 Feb 2015 16:44:09 +0100
From:	Maxime Ripard <maxime.ripard@...e-electrons.com>
To:	Chen-Yu Tsai <wens@...e.org>
Cc:	Rob Herring <robh+dt@...nel.org>,
	Grant Likely <grant.likely@...aro.org>,
	Kishon Vijay Abraham I <kishon@...com>,
	linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: Re: [PATCH v4 0/5] ARM: sun9i: Add USB host controller support for
 A80

On Tue, Feb 03, 2015 at 06:22:00AM +0800, Chen-Yu Tsai wrote:
> Hi everyone,
> 
> This is v4 of the sun9i A80 USB host support series.
> 
> Changes since v3:
> 
>   - Dropped patches merged.
> 
>   - Moved reg_usb3_vbus into the optimus board dts
> 
>   - Dropped ohci1 from A80 dtsi.
> 
> Cover letter from v3:
> 
> This series adds USB host controller (EHCI/OHCI) support for the Allwinner
> A80 SoC. The A80 has 3 pairs of host controllers and USB PHYs. The PHYs,
> unlike in previous SoCs, do not have low level control registers anymore.
> 
> As such, this series forgoes the original phy-sun4i-usb driver, and adds
> a new, simpler driver for the USB PHYs. It may be possible to merge the
> two, but given that work is being done on the OTG front for the earlier
> SoCs, it may be better to merge them after support is complete.
> 
> EHCI/OHCI0 corresponds to USB1 DP/DM pins; EHCI1 only has HSIC support;
> EHCI2/OHCI/2 is USB2 DP/DM externally. External pins labeled USB0 are
> for the USB 3.0 OTG controller.

Applied 2-5.

Thanks!

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)