| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.DEB.2.02.1502070020530.3767@utopia.booyaka.com>
Date: Sat, 7 Feb 2015 00:23:38 +0000 (UTC)
From: Paul Walmsley <paul@...an.com>
To: linux-omap@...r.kernel.org
cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
jonathanh@...dia.com, aaro.koskinen@....fi,
tuukka.tikkanen@...aro.org, khilman@...prootsystems.com,
tony@...mide.com, linux@....linux.org.uk
Subject: [PATCH] ARM: OMAP1: PM: fix some build warnings on 1510-only
Kconfigs
Building an OMAP1510-only Kconfig generates the following warnings:
arch/arm/mach-omap1/pm.c: In function ‘omap1_pm_idle’:
arch/arm/mach-omap1/pm.c:123:2: warning: #warning Enable 32kHz OS timer in order to allow sleep states in idle [-Wcpp]
#warning Enable 32kHz OS timer in order to allow sleep states in idle
^
arch/arm/mach-omap1/pm.c: At top level:
arch/arm/mach-omap1/pm.c:76:23: warning: ‘enable_dyn_sleep’ defined but not used [-Wunused-variable]
static unsigned short enable_dyn_sleep = 0;
^
These are not so easy to fix in an obviously correct fashion, since I
don't have these devices up and running in my testbed. So, use
arch/arm/plat-omap/Kconfig and the existing pm.c source as a guide,
and posit that deep power saving states are only supported on OMAP16xx
chips with kernels built with both CONFIG_OMAP_DM_TIMER=y and
CONFIG_OMAP_32K_TIMER=y.
While here, clean up a few printk()s and unnecessary #ifdefs.
Signed-off-by: Paul Walmsley <paul@...an.com>
Cc: Jon Hunter <jonathanh@...dia.com>
Cc: Aaro Koskinen <aaro.koskinen@....fi>
Cc: Tuukka Tikkanen <tuukka.tikkanen@...aro.org>
Cc: Kevin Hilman <khilman@...prootsystems.com>
Cc: Tony Lindgren <tony@...mide.com>
Cc: Russell King <linux@....linux.org.uk>
Cc: linux-omap@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org
---
Hi folks, if anyone out there is still experimenting with OMAP1 PM, or has
a copy of the OMAP1510 TRMs, could you please check this patch? I'm
unable to test it since I don't have any OMAP1 devices currently active
in the testbed. It at least compiles and deals with the build warnings:
http://www.pwsan.com/omap/testlogs/fix-omap-warnings-v3.21/20150206154619/
Non-critical; targeted for v3.20-rc1 or v3.21-rc1.
arch/arm/mach-omap1/pm.c | 42 +++++++++++++++++++++---------------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 34b4c0044961..d46d8a222fbb 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -71,13 +71,7 @@ static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
-#ifndef CONFIG_OMAP_32K_TIMER
-
-static unsigned short enable_dyn_sleep = 0;
-
-#else
-
-static unsigned short enable_dyn_sleep = 1;
+static unsigned short enable_dyn_sleep;
static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr,
char *buf)
@@ -90,8 +84,9 @@ static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr,
{
unsigned short value;
if (sscanf(buf, "%hu", &value) != 1 ||
- (value != 0 && value != 1)) {
- printk(KERN_ERR "idle_sleep_store: Invalid value\n");
+ (value != 0 && value != 1) ||
+ (value != 0 && !IS_ENABLED(CONFIG_OMAP_32K_TIMER))) {
+ pr_err("idle_sleep_store: Invalid value\n");
return -EINVAL;
}
enable_dyn_sleep = value;
@@ -101,7 +96,6 @@ static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr,
static struct kobj_attribute sleep_while_idle_attr =
__ATTR(sleep_while_idle, 0644, idle_show, idle_store);
-#endif
static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
@@ -120,12 +114,11 @@ void omap1_pm_idle(void)
local_fiq_disable();
#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
-#warning Enable 32kHz OS timer in order to allow sleep states in idle
use_idlect1 = use_idlect1 & ~(1 << 9);
-#else
+#endif
+
if (enable_dyn_sleep)
do_sleep = 1;
-#endif
#ifdef CONFIG_OMAP_DM_TIMER
use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1);
@@ -635,15 +628,24 @@ static const struct platform_suspend_ops omap_pm_ops = {
static int __init omap_pm_init(void)
{
-
-#ifdef CONFIG_OMAP_32K_TIMER
- int error;
-#endif
+ int error = 0;
if (!cpu_class_is_omap1())
return -ENODEV;
- printk("Power Management for TI OMAP.\n");
+ pr_info("Power Management for TI OMAP.\n");
+
+ if (!IS_ENABLED(CONFIG_OMAP_32K_TIMER))
+ pr_info("OMAP1 PM: sleep states in idle disabled due to no 32KiHz timer\n");
+
+ if (!IS_ENABLED(CONFIG_OMAP_DM_TIMER))
+ pr_info("OMAP1 PM: sleep states in idle disabled due to no DMTIMER support\n");
+
+ if (IS_ENABLED(CONFIG_OMAP_32K_TIMER) &&
+ IS_ENABLED(CONFIG_OMAP_DM_TIMER) && cpu_is_omap16xx()) {
+ pr_info("OMAP1 PM: sleep states in idle enabled\n");
+ enable_dyn_sleep = 1;
+ }
/*
* We copy the assembler sleep/wakeup routines to SRAM.
@@ -693,17 +695,15 @@ static int __init omap_pm_init(void)
omap_pm_init_debugfs();
#endif
-#ifdef CONFIG_OMAP_32K_TIMER
error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr);
if (error)
printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
-#endif
if (cpu_is_omap16xx()) {
/* configure LOW_PWR pin */
omap_cfg_reg(T20_1610_LOW_PWR);
}
- return 0;
+ return error;
}
__initcall(omap_pm_init);
--
2.1.4
Powered by blists - more mailing lists