| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1423285636-8623-3-git-send-email-cbz@baozis.org>
Date: Sat, 7 Feb 2015 13:07:15 +0800
From: Chen Baozi <cbz@...zis.org>
To: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: Chen Baozi <cbz@...zis.org>, devicetree@...r.kernel.org
Subject: [PATCH 2/3] arm64, ft-1500a: Add initial dts for Phytium FT-1500A SoC
Add initial device tree nodes for Phytium FT-1500A SoC with support of
16 cores, gicv3 interrupt controller, serial port, PCIe host and
on-chip GMAC ethernet controller.
Signed-off-by: Chen Baozi <chenbaozi@...inos.com.cn>
---
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/phytium/Makefile | 5 +
arch/arm64/boot/dts/phytium/ft-1500a.dtsi | 269 ++++++++++++++++++++++
arch/arm64/boot/dts/phytium/ft1500a-v2-dsk-v2.dts | 39 ++++
4 files changed, 314 insertions(+)
create mode 100644 arch/arm64/boot/dts/phytium/Makefile
create mode 100644 arch/arm64/boot/dts/phytium/ft-1500a.dtsi
create mode 100644 arch/arm64/boot/dts/phytium/ft1500a-v2-dsk-v2.dts
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index c62b0f4..e7e9e3d 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -2,5 +2,6 @@ dts-dirs += amd
dts-dirs += apm
dts-dirs += arm
dts-dirs += cavium
+dts-dirs += phytium
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/phytium/Makefile b/arch/arm64/boot/dts/phytium/Makefile
new file mode 100644
index 0000000..12a22c6
--- /dev/null
+++ b/arch/arm64/boot/dts/phytium/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_PHYTIUM) += ft1500a-v2-dsk-v2.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/phytium/ft-1500a.dtsi b/arch/arm64/boot/dts/phytium/ft-1500a.dtsi
new file mode 100644
index 0000000..9005389
--- /dev/null
+++ b/arch/arm64/boot/dts/phytium/ft-1500a.dtsi
@@ -0,0 +1,269 @@
+/*
+ * DTS file for Phytium FT-1500A SoC
+ *
+ * Copyright (C) 2015, Phytium Technology Co., Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/memreserve/ 0x80000000 0x100000;
+/ {
+ compatible = "phytium,ft-1500a";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x000>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x001>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x002>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x003>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@4 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@5 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@6 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x102>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@7 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x103>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@8 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x200>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@9 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x201>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@10 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x202>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@11 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x203>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@12 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x300>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@13 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x301>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@14 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x302>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+
+ cpu@15 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x303>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8007fff0>;
+ };
+ };
+
+ gic: interrupt-controller@...00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ reg = <0x0 0x29800000 0 0x10000>, /* GICD */
+ <0x0 0x29a00000 0 0x200000>, /* GICR */
+ <0x0 0x29c00000 0 0x10000>, /* GICC */
+ <0x0 0x29c10000 0 0x10000>, /* GICH */
+ <0x0 0x29c20000 0 0x10000>; /* GICV */
+ interrupts = <1 9 4>;
+
+ its: gic-its@...20000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x29820000 0x0 0x20000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 8>,
+ <1 14 8>,
+ <1 11 8>,
+ <1 10 8>;
+ clock-frequency = <50000000>;
+ };
+
+ soc {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gmac_clk: clk_csr {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ };
+
+ uart0: serial@...00000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x28000000 0x0 0x1000>;
+ clock-frequency = <50000000>;
+ interrupts = <0 34 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disable";
+ };
+
+ uart1: serial@...01000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x28001000 0x0 0x1000>;
+ clock-frequency = <50000000>;
+ interrupts = <0 35 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disable";
+ };
+
+ gmac0: ethernet@...00000 {
+ compatible = "snps,dwmac";
+ reg = <0 0x28c00000 0x0 0x2000>;
+ interrupts = <0 44 4>;
+ interrupt-names = "macirq";
+ clocks = <&gmac_clk>;
+ clock-names = "stmmaceth";
+ snps,pbl = <16>;
+ snps,abl = <32>;
+ snps,fixed-burst;
+ snps,force_sf_dma_mode;
+ snps,multicast-filter-bins = <64>;
+ snps,perfect-filter-entries = <1>;
+ max-frame-size = <9000>;
+ status = "disable";
+ };
+
+ gmac1: ethernet@...02000 {
+ compatible = "snps,dwmac";
+ reg = <0 0x28c02000 0x0 0x2000>;
+ interrupts = <0 45 4>;
+ interrupt-names = "macirq";
+ clocks = <&gmac_clk>;
+ clock-names = "stmmaceth";
+ snps,pbl = <16>;
+ snps,abl = <32>;
+ snps,fixed-burst;
+ snps,force_sf_dma_mode;
+ snps,multicast-filter-bins = <64>;
+ snps,perfect-filter-entries = <1>;
+ max-frame-size = <9000>;
+ status = "disable";
+ };
+
+ pcie0: pcie-controller {
+ compatible = "pci-host-ecam-generic";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ reg = <0 0x40000000 0 0x10000000>;
+ dma-coherent;
+ msi-parent = <&its>;
+ interrupt-map-mask = <0x0000 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x33 0x4>,
+ <0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x34 0x4>,
+ <0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x35 0x4>,
+ <0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x36 0x4>;
+ ranges = <0x01000000 0x00 0x00000000 0x00 0x50000000 0x00 0x1000000>,
+ <0x02000000 0x00 0x60000000 0x00 0x60000000 0x00 0x20000000>,
+ <0x03000000 0x01 0x00000000 0x01 0x00000000 0x01 0x00000000>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/phytium/ft1500a-v2-dsk-v2.dts b/arch/arm64/boot/dts/phytium/ft1500a-v2-dsk-v2.dts
new file mode 100644
index 0000000..7717112
--- /dev/null
+++ b/arch/arm64/boot/dts/phytium/ft1500a-v2-dsk-v2.dts
@@ -0,0 +1,39 @@
+/*
+ * DTS file for Phytium FT1500A-V2-DSK-V2 board
+ *
+ * Copyright (C) 2015, Phytium Technology Co., Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+/include/ "ft-1500a.dtsi"
+
+/ {
+ model = "Phytium ft1500a-v2-dsk-v2 board";
+ compatible = "phytium,ft-1500a";
+
+ chosen {
+ linux,pci-probe-only;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x80000000>; /* Updated by bootloader */
+ };
+};
+
+&uart1 {
+ status = "ok";
+};
+
+&gmac0 {
+ phy-mode = "gmii";
+ status = "ok";
+};
+
+&gmac1 {
+ phy-mode = "gmii";
+ status = "ok";
+};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists