linux-kernel - [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1423466726-20833-2-git-send-email-addy.ke@rock-chips.com>
Date:	Mon,  9 Feb 2015 15:25:25 +0800
From:	Addy Ke <addy.ke@...k-chips.com>
To:	robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
	ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
	rdunlap@...radead.org, tgih.jun@...sung.com,
	jh80.chung@...sung.com, chris@...ntf.net, ulf.hansson@...aro.org,
	dinguyen@...era.com, heiko@...ech.de, olof@...om.net,
	dianders@...omium.org, sonnyrao@...omium.org, amstan@...omium.org,
	djkurtz@...omium.org
Cc:	devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-mmc@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-rockchip@...ts.infradead.org, zhenfu.fang@...k-chips.com,
	cf@...k-chips.com, lintao@...k-chips.com, chenfen@...k-chips.com,
	zyf@...k-chips.com, xjq@...k-chips.com, huangtao@...k-chips.com,
	zyw@...k-chips.com, yzq@...k-chips.com, hj@...k-chips.com,
	kever.yang@...k-chips.com, zhangqing@...k-chips.com,
	hl@...k-chips.com, Addy Ke <addy.ke@...k-chips.com>
Subject: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'

Because of some uncertain factors, such as worse card or worse hardware,
DAT[3:0](the data lines) may be pulled down by card, and mmc controller
will be in busy state. This should not happend when mmc controller
send command to update card clocks. If this happends, mci_send_cmd will
be failed and we will get 'Timeout sending command', and then system will
be blocked. To avoid this, we need reset mmc controller.

Signed-off-by: Addy Ke <addy.ke@...k-chips.com>
---
 drivers/mmc/host/dw_mmc.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 4d2e3c2..b0b57e3 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -100,6 +100,7 @@ struct idmac_desc {
 };
 #endif /* CONFIG_MMC_DW_IDMAC */
 
+static int dw_mci_card_busy(struct mmc_host *mmc);
 static bool dw_mci_reset(struct dw_mci *host);
 static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
 
@@ -888,6 +889,31 @@ static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
 		cmd, arg, cmd_status);
 }
 
+static void dw_mci_wait_busy(struct dw_mci_slot *slot)
+{
+	struct dw_mci *host = slot->host;
+	unsigned long timeout = jiffies + msecs_to_jiffies(500);
+
+	do {
+		if (!dw_mci_card_busy(slot->mmc))
+			return;
+		cpu_relax();
+	} while (time_before(jiffies, timeout));
+
+	dev_err(host->dev, "Data busy (status %#x)\n",
+		mci_readl(slot->host, STATUS));
+
+	/*
+	 * Data busy, this should not happend when mmc controller send command
+	 * to update card clocks in non-volt-switch state. If it happends, we
+	 * should reset controller to avoid getting "Timeout sending command".
+	 */
+	dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS);
+
+	/* Fail to reset controller or still data busy, WARN_ON! */
+	WARN_ON(dw_mci_card_busy(slot->mmc));
+}
+
 static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
 {
 	struct dw_mci *host = slot->host;
@@ -899,6 +925,8 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
 	/* We must continue to set bit 28 in CMD until the change is complete */
 	if (host->state == STATE_WAITING_CMD11_DONE)
 		sdmmc_cmd_bits |= SDMMC_CMD_VOLT_SWITCH;
+	else
+		dw_mci_wait_busy(slot);
 
 	if (!clock) {
 		mci_writel(host, CLKENA, 0);
-- 
1.8.3.2


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/